bsbe1.h 3.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106
  1. /*
  2. * bsbe1.h - ALPS BSBE1 tuner support
  3. *
  4. * This program is free software; you can redistribute it and/or
  5. * modify it under the terms of the GNU General Public License
  6. * as published by the Free Software Foundation; either version 2
  7. * of the License, or (at your option) any later version.
  8. *
  9. *
  10. * This program is distributed in the hope that it will be useful,
  11. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13. * GNU General Public License for more details.
  14. *
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  20. *
  21. *
  22. * the project's page is at http://www.linuxtv.org
  23. */
  24. #ifndef BSBE1_H
  25. #define BSBE1_H
  26. static u8 alps_bsbe1_inittab[] = {
  27. 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */
  28. 0x02, 0x30, /* MCLK = 88 MHz */
  29. 0x03, 0x00, /* ACR output 0 */
  30. 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
  31. 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */
  32. 0x06, 0x00, /* DAC output 0 */
  33. 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
  34. 0x09, 0x00, /* FIFO */
  35. 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */
  36. 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */
  37. 0x0f, 0x92, /* AGC1R */
  38. 0x10, 0x34, /* AGC2O */
  39. 0x11, 0x84, /* TLSR */
  40. 0x12, 0xb9, /* CFD */
  41. 0x15, 0xc9, /* lock detector threshold */
  42. 0x28, 0x00, /* out imp: normal, type: parallel, FEC mode: QPSK */
  43. 0x33, 0xfc, /* RS control */
  44. 0x34, 0x93, /* count viterbi bit errors per 2E18 bytes */
  45. 0xff, 0xff
  46. };
  47. static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
  48. {
  49. u8 aclk = 0;
  50. u8 bclk = 0;
  51. if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
  52. else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
  53. else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
  54. else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
  55. else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
  56. else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
  57. stv0299_writereg(fe, 0x13, aclk);
  58. stv0299_writereg(fe, 0x14, bclk);
  59. stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
  60. stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
  61. stv0299_writereg(fe, 0x21, (ratio ) & 0xf0);
  62. return 0;
  63. }
  64. static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
  65. {
  66. int ret;
  67. u8 data[4];
  68. u32 div;
  69. struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
  70. struct i2c_adapter *i2c = fe->tuner_priv;
  71. if ((params->frequency < 950000) || (params->frequency > 2150000))
  72. return -EINVAL;
  73. div = params->frequency / 1000;
  74. data[0] = (div >> 8) & 0x7f;
  75. data[1] = div & 0xff;
  76. data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
  77. data[3] = 0xe0;
  78. if (fe->ops.i2c_gate_ctrl)
  79. fe->ops.i2c_gate_ctrl(fe, 1);
  80. ret = i2c_transfer(i2c, &msg, 1);
  81. return (ret != 1) ? -EIO : 0;
  82. }
  83. static struct stv0299_config alps_bsbe1_config = {
  84. .demod_address = 0x68,
  85. .inittab = alps_bsbe1_inittab,
  86. .mclk = 88000000UL,
  87. .invert = 1,
  88. .skip_reinit = 0,
  89. .min_delay_ms = 100,
  90. .set_symbol_rate = alps_bsbe1_set_symbol_rate,
  91. };
  92. #endif