123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106 |
- /*
- * bsbe1.h - ALPS BSBE1 tuner support
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org
- */
- #ifndef BSBE1_H
- #define BSBE1_H
- static u8 alps_bsbe1_inittab[] = {
- 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */
- 0x02, 0x30, /* MCLK = 88 MHz */
- 0x03, 0x00, /* ACR output 0 */
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x00, /* DAC output 0 */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */
- 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */
- 0x0f, 0x92, /* AGC1R */
- 0x10, 0x34, /* AGC2O */
- 0x11, 0x84, /* TLSR */
- 0x12, 0xb9, /* CFD */
- 0x15, 0xc9, /* lock detector threshold */
- 0x28, 0x00, /* out imp: normal, type: parallel, FEC mode: QPSK */
- 0x33, 0xfc, /* RS control */
- 0x34, 0x93, /* count viterbi bit errors per 2E18 bytes */
- 0xff, 0xff
- };
- static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
- {
- u8 aclk = 0;
- u8 bclk = 0;
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
- stv0299_writereg(fe, 0x13, aclk);
- stv0299_writereg(fe, 0x14, bclk);
- stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg(fe, 0x21, (ratio ) & 0xf0);
- return 0;
- }
- static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
- {
- int ret;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
- struct i2c_adapter *i2c = fe->tuner_priv;
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
- div = params->frequency / 1000;
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
- data[3] = 0xe0;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- ret = i2c_transfer(i2c, &msg, 1);
- return (ret != 1) ? -EIO : 0;
- }
- static struct stv0299_config alps_bsbe1_config = {
- .demod_address = 0x68,
- .inittab = alps_bsbe1_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsbe1_set_symbol_rate,
- };
- #endif
|