123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288 |
- /*
- * Copyright (C) 2007 PA Semi, Inc
- *
- * Authors: Egor Martovetsky <egor@pasemi.com>
- * Olof Johansson <olof@lixom.net>
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c:
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
- #include <linux/cpufreq.h>
- #include <linux/timer.h>
- #include <linux/module.h>
- #include <linux/of_address.h>
- #include <asm/hw_irq.h>
- #include <asm/io.h>
- #include <asm/prom.h>
- #include <asm/time.h>
- #include <asm/smp.h>
- #define SDCASR_REG 0x0100
- #define SDCASR_REG_STRIDE 0x1000
- #define SDCPWR_CFGA0_REG 0x0100
- #define SDCPWR_PWST0_REG 0x0000
- #define SDCPWR_GIZTIME_REG 0x0440
- /* SDCPWR_GIZTIME_REG fields */
- #define SDCPWR_GIZTIME_GR 0x80000000
- #define SDCPWR_GIZTIME_LONGLOCK 0x000000ff
- /* Offset of ASR registers from SDC base */
- #define SDCASR_OFFSET 0x120000
- static void __iomem *sdcpwr_mapbase;
- static void __iomem *sdcasr_mapbase;
- /* Current astate, is used when waking up from power savings on
- * one core, in case the other core has switched states during
- * the idle time.
- */
- static int current_astate;
- /* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
- static struct cpufreq_frequency_table pas_freqs[] = {
- {0, 0, 0},
- {0, 1, 0},
- {0, 2, 0},
- {0, 3, 0},
- {0, 4, 0},
- {0, 0, CPUFREQ_TABLE_END},
- };
- /*
- * hardware specific functions
- */
- static int get_astate_freq(int astate)
- {
- u32 ret;
- ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10));
- return ret & 0x3f;
- }
- static int get_cur_astate(int cpu)
- {
- u32 ret;
- ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG);
- ret = (ret >> (cpu * 4)) & 0x7;
- return ret;
- }
- static int get_gizmo_latency(void)
- {
- u32 giztime, ret;
- giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG);
- /* just provide the upper bound */
- if (giztime & SDCPWR_GIZTIME_GR)
- ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000;
- else
- ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000;
- return ret;
- }
- static void set_astate(int cpu, unsigned int astate)
- {
- unsigned long flags;
- /* Return if called before init has run */
- if (unlikely(!sdcasr_mapbase))
- return;
- local_irq_save(flags);
- out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate);
- local_irq_restore(flags);
- }
- int check_astate(void)
- {
- return get_cur_astate(hard_smp_processor_id());
- }
- void restore_astate(int cpu)
- {
- set_astate(cpu, current_astate);
- }
- /*
- * cpufreq functions
- */
- static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
- {
- struct cpufreq_frequency_table *pos;
- const u32 *max_freqp;
- u32 max_freq;
- int cur_astate;
- struct resource res;
- struct device_node *cpu, *dn;
- int err = -ENODEV;
- cpu = of_get_cpu_node(policy->cpu, NULL);
- if (!cpu)
- goto out;
- max_freqp = of_get_property(cpu, "clock-frequency", NULL);
- of_node_put(cpu);
- if (!max_freqp) {
- err = -EINVAL;
- goto out;
- }
- /* we need the freq in kHz */
- max_freq = *max_freqp / 1000;
- dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
- if (!dn)
- dn = of_find_compatible_node(NULL, NULL,
- "pasemi,pwrficient-sdc");
- if (!dn)
- goto out;
- err = of_address_to_resource(dn, 0, &res);
- of_node_put(dn);
- if (err)
- goto out;
- sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000);
- if (!sdcasr_mapbase) {
- err = -EINVAL;
- goto out;
- }
- dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
- if (!dn)
- dn = of_find_compatible_node(NULL, NULL,
- "pasemi,pwrficient-gizmo");
- if (!dn) {
- err = -ENODEV;
- goto out_unmap_sdcasr;
- }
- err = of_address_to_resource(dn, 0, &res);
- of_node_put(dn);
- if (err)
- goto out_unmap_sdcasr;
- sdcpwr_mapbase = ioremap(res.start, 0x1000);
- if (!sdcpwr_mapbase) {
- err = -EINVAL;
- goto out_unmap_sdcasr;
- }
- pr_debug("init cpufreq on CPU %d\n", policy->cpu);
- pr_debug("max clock-frequency is at %u kHz\n", max_freq);
- pr_debug("initializing frequency table\n");
- /* initialize frequency table */
- cpufreq_for_each_entry(pos, pas_freqs) {
- pos->frequency = get_astate_freq(pos->driver_data) * 100000;
- pr_debug("%d: %d\n", (int)(pos - pas_freqs), pos->frequency);
- }
- cur_astate = get_cur_astate(policy->cpu);
- pr_debug("current astate is at %d\n",cur_astate);
- policy->cur = pas_freqs[cur_astate].frequency;
- ppc_proc_freq = policy->cur * 1000ul;
- return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency());
- out_unmap_sdcasr:
- iounmap(sdcasr_mapbase);
- out:
- return err;
- }
- static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
- {
- /*
- * We don't support CPU hotplug. Don't unmap after the system
- * has already made it to a running state.
- */
- if (system_state >= SYSTEM_RUNNING)
- return 0;
- if (sdcasr_mapbase)
- iounmap(sdcasr_mapbase);
- if (sdcpwr_mapbase)
- iounmap(sdcpwr_mapbase);
- return 0;
- }
- static int pas_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int pas_astate_new)
- {
- int i;
- pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
- policy->cpu,
- pas_freqs[pas_astate_new].frequency,
- pas_freqs[pas_astate_new].driver_data);
- current_astate = pas_astate_new;
- for_each_online_cpu(i)
- set_astate(i, pas_astate_new);
- ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul;
- return 0;
- }
- static struct cpufreq_driver pas_cpufreq_driver = {
- .name = "pas-cpufreq",
- .flags = CPUFREQ_CONST_LOOPS,
- .init = pas_cpufreq_cpu_init,
- .exit = pas_cpufreq_cpu_exit,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = pas_cpufreq_target,
- .attr = cpufreq_generic_attr,
- };
- /*
- * module init and destoy
- */
- static int __init pas_cpufreq_init(void)
- {
- if (!of_machine_is_compatible("PA6T-1682M") &&
- !of_machine_is_compatible("pasemi,pwrficient"))
- return -ENODEV;
- return cpufreq_register_driver(&pas_cpufreq_driver);
- }
- static void __exit pas_cpufreq_exit(void)
- {
- cpufreq_unregister_driver(&pas_cpufreq_driver);
- }
- module_init(pas_cpufreq_init);
- module_exit(pas_cpufreq_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>");
|