123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523 |
- /*
- * iio/adc/max1027.c
- * Copyright (C) 2014 Philippe Reynes
- *
- * based on linux/drivers/iio/ad7923.c
- * Copyright 2011 Analog Devices Inc (from AD7923 Driver)
- * Copyright 2012 CS Systemes d'Information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * max1027.c
- *
- * Partial support for max1027 and similar chips.
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/spi/spi.h>
- #include <linux/delay.h>
- #include <linux/iio/iio.h>
- #include <linux/iio/buffer.h>
- #include <linux/iio/trigger.h>
- #include <linux/iio/trigger_consumer.h>
- #include <linux/iio/triggered_buffer.h>
- #define MAX1027_CONV_REG BIT(7)
- #define MAX1027_SETUP_REG BIT(6)
- #define MAX1027_AVG_REG BIT(5)
- #define MAX1027_RST_REG BIT(4)
- /* conversion register */
- #define MAX1027_TEMP BIT(0)
- #define MAX1027_SCAN_0_N (0x00 << 1)
- #define MAX1027_SCAN_N_M (0x01 << 1)
- #define MAX1027_SCAN_N (0x02 << 1)
- #define MAX1027_NOSCAN (0x03 << 1)
- #define MAX1027_CHAN(n) ((n) << 3)
- /* setup register */
- #define MAX1027_UNIPOLAR 0x02
- #define MAX1027_BIPOLAR 0x03
- #define MAX1027_REF_MODE0 (0x00 << 2)
- #define MAX1027_REF_MODE1 (0x01 << 2)
- #define MAX1027_REF_MODE2 (0x02 << 2)
- #define MAX1027_REF_MODE3 (0x03 << 2)
- #define MAX1027_CKS_MODE0 (0x00 << 4)
- #define MAX1027_CKS_MODE1 (0x01 << 4)
- #define MAX1027_CKS_MODE2 (0x02 << 4)
- #define MAX1027_CKS_MODE3 (0x03 << 4)
- /* averaging register */
- #define MAX1027_NSCAN_4 0x00
- #define MAX1027_NSCAN_8 0x01
- #define MAX1027_NSCAN_12 0x02
- #define MAX1027_NSCAN_16 0x03
- #define MAX1027_NAVG_4 (0x00 << 2)
- #define MAX1027_NAVG_8 (0x01 << 2)
- #define MAX1027_NAVG_16 (0x02 << 2)
- #define MAX1027_NAVG_32 (0x03 << 2)
- #define MAX1027_AVG_EN BIT(4)
- enum max1027_id {
- max1027,
- max1029,
- max1031,
- };
- static const struct spi_device_id max1027_id[] = {
- {"max1027", max1027},
- {"max1029", max1029},
- {"max1031", max1031},
- {}
- };
- MODULE_DEVICE_TABLE(spi, max1027_id);
- #ifdef CONFIG_OF
- static const struct of_device_id max1027_adc_dt_ids[] = {
- { .compatible = "maxim,max1027" },
- { .compatible = "maxim,max1029" },
- { .compatible = "maxim,max1031" },
- {},
- };
- MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
- #endif
- #define MAX1027_V_CHAN(index) \
- { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .channel = index, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .scan_index = index + 1, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 10, \
- .storagebits = 16, \
- .shift = 2, \
- .endianness = IIO_BE, \
- }, \
- }
- #define MAX1027_T_CHAN \
- { \
- .type = IIO_TEMP, \
- .channel = 0, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .scan_index = 0, \
- .scan_type = { \
- .sign = 'u', \
- .realbits = 12, \
- .storagebits = 16, \
- .endianness = IIO_BE, \
- }, \
- }
- static const struct iio_chan_spec max1027_channels[] = {
- MAX1027_T_CHAN,
- MAX1027_V_CHAN(0),
- MAX1027_V_CHAN(1),
- MAX1027_V_CHAN(2),
- MAX1027_V_CHAN(3),
- MAX1027_V_CHAN(4),
- MAX1027_V_CHAN(5),
- MAX1027_V_CHAN(6),
- MAX1027_V_CHAN(7)
- };
- static const struct iio_chan_spec max1029_channels[] = {
- MAX1027_T_CHAN,
- MAX1027_V_CHAN(0),
- MAX1027_V_CHAN(1),
- MAX1027_V_CHAN(2),
- MAX1027_V_CHAN(3),
- MAX1027_V_CHAN(4),
- MAX1027_V_CHAN(5),
- MAX1027_V_CHAN(6),
- MAX1027_V_CHAN(7),
- MAX1027_V_CHAN(8),
- MAX1027_V_CHAN(9),
- MAX1027_V_CHAN(10),
- MAX1027_V_CHAN(11)
- };
- static const struct iio_chan_spec max1031_channels[] = {
- MAX1027_T_CHAN,
- MAX1027_V_CHAN(0),
- MAX1027_V_CHAN(1),
- MAX1027_V_CHAN(2),
- MAX1027_V_CHAN(3),
- MAX1027_V_CHAN(4),
- MAX1027_V_CHAN(5),
- MAX1027_V_CHAN(6),
- MAX1027_V_CHAN(7),
- MAX1027_V_CHAN(8),
- MAX1027_V_CHAN(9),
- MAX1027_V_CHAN(10),
- MAX1027_V_CHAN(11),
- MAX1027_V_CHAN(12),
- MAX1027_V_CHAN(13),
- MAX1027_V_CHAN(14),
- MAX1027_V_CHAN(15)
- };
- static const unsigned long max1027_available_scan_masks[] = {
- 0x000001ff,
- 0x00000000,
- };
- static const unsigned long max1029_available_scan_masks[] = {
- 0x00001fff,
- 0x00000000,
- };
- static const unsigned long max1031_available_scan_masks[] = {
- 0x0001ffff,
- 0x00000000,
- };
- struct max1027_chip_info {
- const struct iio_chan_spec *channels;
- unsigned int num_channels;
- const unsigned long *available_scan_masks;
- };
- static const struct max1027_chip_info max1027_chip_info_tbl[] = {
- [max1027] = {
- .channels = max1027_channels,
- .num_channels = ARRAY_SIZE(max1027_channels),
- .available_scan_masks = max1027_available_scan_masks,
- },
- [max1029] = {
- .channels = max1029_channels,
- .num_channels = ARRAY_SIZE(max1029_channels),
- .available_scan_masks = max1029_available_scan_masks,
- },
- [max1031] = {
- .channels = max1031_channels,
- .num_channels = ARRAY_SIZE(max1031_channels),
- .available_scan_masks = max1031_available_scan_masks,
- },
- };
- struct max1027_state {
- const struct max1027_chip_info *info;
- struct spi_device *spi;
- struct iio_trigger *trig;
- __be16 *buffer;
- struct mutex lock;
- u8 reg ____cacheline_aligned;
- };
- static int max1027_read_single_value(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val)
- {
- int ret;
- struct max1027_state *st = iio_priv(indio_dev);
- if (iio_buffer_enabled(indio_dev)) {
- dev_warn(&indio_dev->dev, "trigger mode already enabled");
- return -EBUSY;
- }
- /* Start acquisition on conversion register write */
- st->reg = MAX1027_SETUP_REG | MAX1027_REF_MODE2 | MAX1027_CKS_MODE2;
- ret = spi_write(st->spi, &st->reg, 1);
- if (ret < 0) {
- dev_err(&indio_dev->dev,
- "Failed to configure setup register\n");
- return ret;
- }
- /* Configure conversion register with the requested chan */
- st->reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) |
- MAX1027_NOSCAN | !!(chan->type == IIO_TEMP);
- ret = spi_write(st->spi, &st->reg, 1);
- if (ret < 0) {
- dev_err(&indio_dev->dev,
- "Failed to configure conversion register\n");
- return ret;
- }
- /*
- * For an unknown reason, when we use the mode "10" (write
- * conversion register), the interrupt doesn't occur every time.
- * So we just wait 1 ms.
- */
- mdelay(1);
- /* Read result */
- ret = spi_read(st->spi, st->buffer, (chan->type == IIO_TEMP) ? 4 : 2);
- if (ret < 0)
- return ret;
- *val = be16_to_cpu(st->buffer[0]);
- return IIO_VAL_INT;
- }
- static int max1027_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
- {
- int ret = 0;
- struct max1027_state *st = iio_priv(indio_dev);
- mutex_lock(&st->lock);
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- ret = max1027_read_single_value(indio_dev, chan, val);
- break;
- case IIO_CHAN_INFO_SCALE:
- switch (chan->type) {
- case IIO_TEMP:
- *val = 1;
- *val2 = 8;
- ret = IIO_VAL_FRACTIONAL;
- break;
- case IIO_VOLTAGE:
- *val = 2500;
- *val2 = 10;
- ret = IIO_VAL_FRACTIONAL_LOG2;
- break;
- default:
- ret = -EINVAL;
- break;
- }
- break;
- default:
- ret = -EINVAL;
- break;
- }
- mutex_unlock(&st->lock);
- return ret;
- }
- static int max1027_debugfs_reg_access(struct iio_dev *indio_dev,
- unsigned reg, unsigned writeval,
- unsigned *readval)
- {
- struct max1027_state *st = iio_priv(indio_dev);
- u8 *val = (u8 *)st->buffer;
- if (readval != NULL)
- return -EINVAL;
- *val = (u8)writeval;
- return spi_write(st->spi, val, 1);
- }
- static int max1027_validate_trigger(struct iio_dev *indio_dev,
- struct iio_trigger *trig)
- {
- struct max1027_state *st = iio_priv(indio_dev);
- if (st->trig != trig)
- return -EINVAL;
- return 0;
- }
- static int max1027_set_trigger_state(struct iio_trigger *trig, bool state)
- {
- struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
- struct max1027_state *st = iio_priv(indio_dev);
- int ret;
- if (state) {
- /* Start acquisition on cnvst */
- st->reg = MAX1027_SETUP_REG | MAX1027_CKS_MODE0 |
- MAX1027_REF_MODE2;
- ret = spi_write(st->spi, &st->reg, 1);
- if (ret < 0)
- return ret;
- /* Scan from 0 to max */
- st->reg = MAX1027_CONV_REG | MAX1027_CHAN(0) |
- MAX1027_SCAN_N_M | MAX1027_TEMP;
- ret = spi_write(st->spi, &st->reg, 1);
- if (ret < 0)
- return ret;
- } else {
- /* Start acquisition on conversion register write */
- st->reg = MAX1027_SETUP_REG | MAX1027_CKS_MODE2 |
- MAX1027_REF_MODE2;
- ret = spi_write(st->spi, &st->reg, 1);
- if (ret < 0)
- return ret;
- }
- return 0;
- }
- static int max1027_validate_device(struct iio_trigger *trig,
- struct iio_dev *indio_dev)
- {
- struct iio_dev *indio = iio_trigger_get_drvdata(trig);
- if (indio != indio_dev)
- return -EINVAL;
- return 0;
- }
- static irqreturn_t max1027_trigger_handler(int irq, void *private)
- {
- struct iio_poll_func *pf = (struct iio_poll_func *)private;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct max1027_state *st = iio_priv(indio_dev);
- pr_debug("%s(irq=%d, private=0x%p)\n", __func__, irq, private);
- /* fill buffer with all channel */
- spi_read(st->spi, st->buffer, indio_dev->masklength * 2);
- iio_push_to_buffers(indio_dev, st->buffer);
- iio_trigger_notify_done(indio_dev->trig);
- return IRQ_HANDLED;
- }
- static const struct iio_trigger_ops max1027_trigger_ops = {
- .owner = THIS_MODULE,
- .validate_device = &max1027_validate_device,
- .set_trigger_state = &max1027_set_trigger_state,
- };
- static const struct iio_info max1027_info = {
- .driver_module = THIS_MODULE,
- .read_raw = &max1027_read_raw,
- .validate_trigger = &max1027_validate_trigger,
- .debugfs_reg_access = &max1027_debugfs_reg_access,
- };
- static int max1027_probe(struct spi_device *spi)
- {
- int ret;
- struct iio_dev *indio_dev;
- struct max1027_state *st;
- pr_debug("%s: probe(spi = 0x%p)\n", __func__, spi);
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
- if (indio_dev == NULL) {
- pr_err("Can't allocate iio device\n");
- return -ENOMEM;
- }
- spi_set_drvdata(spi, indio_dev);
- st = iio_priv(indio_dev);
- st->spi = spi;
- st->info = &max1027_chip_info_tbl[spi_get_device_id(spi)->driver_data];
- mutex_init(&st->lock);
- indio_dev->name = spi_get_device_id(spi)->name;
- indio_dev->dev.parent = &spi->dev;
- indio_dev->dev.of_node = spi->dev.of_node;
- indio_dev->info = &max1027_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = st->info->channels;
- indio_dev->num_channels = st->info->num_channels;
- indio_dev->available_scan_masks = st->info->available_scan_masks;
- st->buffer = devm_kmalloc(&indio_dev->dev,
- indio_dev->num_channels * 2,
- GFP_KERNEL);
- if (st->buffer == NULL) {
- dev_err(&indio_dev->dev, "Can't allocate buffer\n");
- return -ENOMEM;
- }
- ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
- &max1027_trigger_handler, NULL);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Failed to setup buffer\n");
- return ret;
- }
- st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger",
- indio_dev->name);
- if (st->trig == NULL) {
- ret = -ENOMEM;
- dev_err(&indio_dev->dev, "Failed to allocate iio trigger\n");
- goto fail_trigger_alloc;
- }
- st->trig->ops = &max1027_trigger_ops;
- st->trig->dev.parent = &spi->dev;
- iio_trigger_set_drvdata(st->trig, indio_dev);
- iio_trigger_register(st->trig);
- ret = devm_request_threaded_irq(&spi->dev, spi->irq,
- iio_trigger_generic_data_rdy_poll,
- NULL,
- IRQF_TRIGGER_FALLING,
- spi->dev.driver->name, st->trig);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n");
- goto fail_dev_register;
- }
- /* Disable averaging */
- st->reg = MAX1027_AVG_REG;
- ret = spi_write(st->spi, &st->reg, 1);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Failed to configure averaging register\n");
- goto fail_dev_register;
- }
- ret = iio_device_register(indio_dev);
- if (ret < 0) {
- dev_err(&indio_dev->dev, "Failed to register iio device\n");
- goto fail_dev_register;
- }
- return 0;
- fail_dev_register:
- fail_trigger_alloc:
- iio_triggered_buffer_cleanup(indio_dev);
- return ret;
- }
- static int max1027_remove(struct spi_device *spi)
- {
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- pr_debug("%s: remove(spi = 0x%p)\n", __func__, spi);
- iio_device_unregister(indio_dev);
- iio_triggered_buffer_cleanup(indio_dev);
- return 0;
- }
- static struct spi_driver max1027_driver = {
- .driver = {
- .name = "max1027",
- .of_match_table = of_match_ptr(max1027_adc_dt_ids),
- },
- .probe = max1027_probe,
- .remove = max1027_remove,
- .id_table = max1027_id,
- };
- module_spi_driver(max1027_driver);
- MODULE_AUTHOR("Philippe Reynes <tremyfr@yahoo.fr>");
- MODULE_DESCRIPTION("MAX1027/MAX1029/MAX1031 ADC");
- MODULE_LICENSE("GPL v2");
|