Project home: https://bues.ch/h/xytronic Original repository at: https://git.bues.ch/git/xytronic-lf.git https://bues.ch/h/xytronic
Michael Buesch
f9af9e0742
makerelease: Default to tar.xz
|
9 年 前 | |
|---|---|---|
| firmware | 9 年 前 | |
| schematics-lf1600 | 9 年 前 | |
| .gitignore | 9 年 前 | |
| README | 9 年 前 | |
| makerelease.sh | 9 年 前 |
README
=====================================
Xytronic LF-1600 Open Source Firmware
=====================================
Copyright (c) 2015 Michael Buesch
Licensed under the terms of the GNU General Public License version 2 or
(at your option) any later version.
Installing the firmware:
------------------------
1) Set the fuse bits of the AtMega88 to:
LFUSE = %%LFUSE%%
HFUSE = %%HFUSE%%
EFUSE = %%EFUSE%%
Note that the original firmware uses different fuses. So this step must
not be omitted.
If you use avrdude, a command similar to the following can be used:
avrdude -B 200 -p m88 -c avrisp2 -P usb -U lfuse:w:%%LFUSE%%:m -U hfuse:w:%%HFUSE%%:m -U efuse:w:%%EFUSE%%:m
2) Flash the firmware image file xytronic-lf.hex to the program memory
of the AtMega88.
If you use avrdude, a command similar to the following can be used:
avrdude -B 1 -p m88 -c avrisp2 -P usb -U flash:w:xytronic-lf.hex
3) Write the EEPROM image file xytronic-lf.eep.hex to the EEPROM memory
of the AtMega88.
If you use avrdude, a command similar to the following can be used:
avrdude -B 1 -p m88 -c avrisp2 -P usb -U eeprom:w:xytronic-lf.eep.hex
Xytronic LF-1600 Open Source Firmware
=====================================
Copyright (c) 2015 Michael Buesch
Licensed under the terms of the GNU General Public License version 2 or
(at your option) any later version.
Installing the firmware:
------------------------
1) Set the fuse bits of the AtMega88 to:
LFUSE = %%LFUSE%%
HFUSE = %%HFUSE%%
EFUSE = %%EFUSE%%
Note that the original firmware uses different fuses. So this step must
not be omitted.
If you use avrdude, a command similar to the following can be used:
avrdude -B 200 -p m88 -c avrisp2 -P usb -U lfuse:w:%%LFUSE%%:m -U hfuse:w:%%HFUSE%%:m -U efuse:w:%%EFUSE%%:m
2) Flash the firmware image file xytronic-lf.hex to the program memory
of the AtMega88.
If you use avrdude, a command similar to the following can be used:
avrdude -B 1 -p m88 -c avrisp2 -P usb -U flash:w:xytronic-lf.hex
3) Write the EEPROM image file xytronic-lf.eep.hex to the EEPROM memory
of the AtMega88.
If you use avrdude, a command similar to the following can be used:
avrdude -B 1 -p m88 -c avrisp2 -P usb -U eeprom:w:xytronic-lf.eep.hex