123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343 |
- /* Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
- #include <linux/clk.h>
- #include <linux/err.h>
- #include <linux/gpio.h>
- #include <linux/mfd/pmic8058.h>
- #include <linux/mfd/pmic8901.h>
- #include <linux/platform_device.h>
- #include <mach/board.h>
- #include <mach/mpp.h>
- #include <sound/core.h>
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
- #include <sound/pcm.h>
- #include <sound/dai.h>
- #include "msm8660-pcm.h"
- #include "../codecs/timpani.h"
- #define PM8058_GPIO_BASE NR_MSM_GPIOS
- #define PM8901_GPIO_BASE (PM8058_GPIO_BASE + \
- PM8058_GPIOS + PM8058_MPPS)
- #define PM8901_GPIO_PM_TO_SYS(pm_gpio) (pm_gpio + PM8901_GPIO_BASE)
- #define GPIO_EXPANDER_GPIO_BASE \
- (PM8901_GPIO_BASE + PM8901_MPPS)
- static struct clk *rx_osr_clk;
- static struct clk *rx_bit_clk;
- static struct clk *tx_osr_clk;
- static struct clk *tx_bit_clk;
- static int rx_hw_param_status;
- static int tx_hw_param_status;
- /* Platform specific logic */
- static int timpani_rx_route_enable(void)
- {
- int ret = 0;
- pr_debug("%s\n", __func__);
- ret = gpio_request(109, "I2S_Clock");
- if (ret != 0) {
- pr_err("%s: I2s clk gpio 109 request"
- "failed\n", __func__);
- return ret;
- }
- return ret;
- }
- static int timpani_rx_route_disable(void)
- {
- int ret = 0;
- pr_debug("%s\n", __func__);
- gpio_free(109);
- return ret;
- }
- #define GPIO_CLASS_D1_EN (GPIO_EXPANDER_GPIO_BASE + 0)
- #define PM8901_MPP_3 (2) /* PM8901 MPP starts from 0 */
- static void config_class_d1_gpio(int enable)
- {
- int rc;
- if (enable) {
- rc = gpio_request(GPIO_CLASS_D1_EN, "CLASSD1_EN");
- if (rc) {
- pr_err("%s: spkr pamp gpio %d request"
- "failed\n", __func__, GPIO_CLASS_D1_EN);
- return;
- }
- gpio_direction_output(GPIO_CLASS_D1_EN, 1);
- gpio_set_value_cansleep(GPIO_CLASS_D1_EN, 1);
- } else {
- gpio_set_value_cansleep(GPIO_CLASS_D1_EN, 0);
- gpio_free(GPIO_CLASS_D1_EN);
- }
- }
- static void config_class_d0_gpio(int enable)
- {
- int rc;
- if (enable) {
- rc = pm8901_mpp_config_digital_out(PM8901_MPP_3,
- PM8901_MPP_DIG_LEVEL_MSMIO, 1);
- if (rc) {
- pr_err("%s: CLASS_D0_EN failed\n", __func__);
- return;
- }
- rc = gpio_request(PM8901_GPIO_PM_TO_SYS(PM8901_MPP_3),
- "CLASSD0_EN");
- if (rc) {
- pr_err("%s: spkr pamp gpio pm8901 mpp3 request"
- "failed\n", __func__);
- pm8901_mpp_config_digital_out(PM8901_MPP_3,
- PM8901_MPP_DIG_LEVEL_MSMIO, 0);
- return;
- }
- gpio_direction_output(PM8901_GPIO_PM_TO_SYS(PM8901_MPP_3), 1);
- gpio_set_value_cansleep(PM8901_GPIO_PM_TO_SYS(PM8901_MPP_3), 1);
- } else {
- pm8901_mpp_config_digital_out(PM8901_MPP_3,
- PM8901_MPP_DIG_LEVEL_MSMIO, 0);
- gpio_set_value_cansleep(PM8901_GPIO_PM_TO_SYS(PM8901_MPP_3), 0);
- gpio_free(PM8901_GPIO_PM_TO_SYS(PM8901_MPP_3));
- }
- }
- static void timpani_poweramp_on(void)
- {
- pr_debug("%s: enable stereo spkr amp\n", __func__);
- timpani_rx_route_enable();
- config_class_d0_gpio(1);
- config_class_d1_gpio(1);
- }
- static void timpani_poweramp_off(void)
- {
- pr_debug("%s: disable stereo spkr amp\n", __func__);
- timpani_rx_route_disable();
- config_class_d0_gpio(0);
- config_class_d1_gpio(0);
- }
- static int msm8660_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
- {
- int rate = params_rate(params);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- if (rx_hw_param_status)
- return 0;
- clk_set_rate(rx_osr_clk, rate * 256);
- rx_hw_param_status++;
- } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- if (tx_hw_param_status)
- return 0;
- clk_set_rate(tx_osr_clk, rate * 256);
- tx_hw_param_status++;
- }
- return 0;
- }
- static int msm8660_startup(struct snd_pcm_substream *substream)
- {
- int ret = 0;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- rx_osr_clk = clk_get(NULL, "i2s_spkr_osr_clk");
- if (IS_ERR(rx_osr_clk)) {
- pr_debug("Failed to get i2s_spkr_osr_clk\n");
- return PTR_ERR(rx_osr_clk);
- }
- /* Master clock OSR 256 */
- /* Initially set to Lowest sample rate Needed */
- clk_set_rate(rx_osr_clk, 8000 * 256);
- ret = clk_prepare_enable(rx_osr_clk);
- if (ret != 0) {
- pr_debug("Unable to enable i2s_spkr_osr_clk\n");
- clk_put(rx_osr_clk);
- return ret;
- }
- rx_bit_clk = clk_get(NULL, "i2s_spkr_bit_clk");
- if (IS_ERR(rx_bit_clk)) {
- pr_debug("Failed to get i2s_spkr_bit_clk\n");
- clk_disable_unprepare(rx_osr_clk);
- clk_put(rx_osr_clk);
- return PTR_ERR(rx_bit_clk);
- }
- clk_set_rate(rx_bit_clk, 8);
- ret = clk_prepare_enable(rx_bit_clk);
- if (ret != 0) {
- pr_debug("Unable to enable i2s_spkr_bit_clk\n");
- clk_put(rx_bit_clk);
- clk_disable_unprepare(rx_osr_clk);
- clk_put(rx_osr_clk);
- return ret;
- }
- timpani_poweramp_on();
- msleep(30);
- /* End of platform specific logic */
- } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- tx_osr_clk = clk_get(NULL, "i2s_mic_osr_clk");
- if (IS_ERR(tx_osr_clk)) {
- pr_debug("Failed to get i2s_mic_osr_clk\n");
- return PTR_ERR(tx_osr_clk);
- }
- /* Master clock OSR 256 */
- clk_set_rate(tx_osr_clk, 8000 * 256);
- ret = clk_prepare_enable(tx_osr_clk);
- if (ret != 0) {
- pr_debug("Unable to enable i2s_mic_osr_clk\n");
- clk_put(tx_osr_clk);
- return ret;
- }
- tx_bit_clk = clk_get(NULL, "i2s_mic_bit_clk");
- if (IS_ERR(tx_bit_clk)) {
- pr_debug("Failed to get i2s_mic_bit_clk\n");
- clk_disable_unprepare(tx_osr_clk);
- clk_put(tx_osr_clk);
- return PTR_ERR(tx_bit_clk);
- }
- clk_set_rate(tx_bit_clk, 8);
- ret = clk_prepare_enable(tx_bit_clk);
- if (ret != 0) {
- pr_debug("Unable to enable i2s_mic_bit_clk\n");
- clk_put(tx_bit_clk);
- clk_disable_unprepare(tx_osr_clk);
- clk_put(tx_osr_clk);
- return ret;
- }
- msm_snddev_enable_dmic_power();
- msleep(30);
- }
- return ret;
- }
- /*
- * TODO: rx/tx_hw_param_status should be a counter in the below code
- * when driver starts supporting mutisession else setting it to 0
- * will stop audio in all sessions.
- */
- static void msm8660_shutdown(struct snd_pcm_substream *substream)
- {
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- rx_hw_param_status = 0;
- timpani_poweramp_off();
- msleep(30);
- if (rx_bit_clk) {
- clk_disable_unprepare(rx_bit_clk);
- clk_put(rx_bit_clk);
- rx_bit_clk = NULL;
- }
- if (rx_osr_clk) {
- clk_disable_unprepare(rx_osr_clk);
- clk_put(rx_osr_clk);
- rx_osr_clk = NULL;
- }
- } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- tx_hw_param_status = 0;
- msm_snddev_disable_dmic_power();
- msleep(30);
- if (tx_bit_clk) {
- clk_disable_unprepare(tx_bit_clk);
- clk_put(tx_bit_clk);
- tx_bit_clk = NULL;
- }
- if (tx_osr_clk) {
- clk_disable_unprepare(tx_osr_clk);
- clk_put(tx_osr_clk);
- tx_osr_clk = NULL;
- }
- }
- }
- static struct snd_soc_ops machine_ops = {
- .startup = msm8660_startup,
- .shutdown = msm8660_shutdown,
- .hw_params = msm8660_hw_params,
- };
- /* Digital audio interface glue - connects codec <---> CPU */
- static struct snd_soc_dai_link msm8660_dai[] = {
- {
- .name = "Audio Rx",
- .stream_name = "Audio Rx",
- .cpu_dai = &msm_cpu_dai[0],
- .codec_dai = &timpani_codec_dai[0],
- .ops = &machine_ops,
- },
- {
- .name = "Audio Tx",
- .stream_name = "Audio Tx",
- .cpu_dai = &msm_cpu_dai[5],
- .codec_dai = &timpani_codec_dai[1],
- .ops = &machine_ops,
- }
- };
- struct snd_soc_card snd_soc_card_msm8660 = {
- .name = "msm8660-pcm-audio",
- .dai_link = msm8660_dai,
- .num_links = ARRAY_SIZE(msm8660_dai),
- .platform = &msm8660_soc_platform,
- };
- /* msm_audio audio subsystem */
- static struct snd_soc_device msm_snd_devdata = {
- .card = &snd_soc_card_msm8660,
- .codec_dev = &soc_codec_dev_timpani,
- };
- static struct platform_device *msm_snd_device;
- static int __init msm_audio_init(void)
- {
- int ret;
- msm_snd_device = platform_device_alloc("soc-audio", 0);
- if (!msm_snd_device) {
- pr_err("Platform device allocation failed\n");
- return -ENOMEM;
- }
- platform_set_drvdata(msm_snd_device, &msm_snd_devdata);
- msm_snd_devdata.dev = &msm_snd_device->dev;
- ret = platform_device_add(msm_snd_device);
- if (ret) {
- platform_device_put(msm_snd_device);
- return ret;
- }
- return ret;
- }
- module_init(msm_audio_init);
- static void __exit msm_audio_exit(void)
- {
- platform_device_unregister(msm_snd_device);
- }
- module_exit(msm_audio_exit);
- MODULE_DESCRIPTION("ALSA SoC MSM8660");
- MODULE_LICENSE("GPL v2");
|