123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232 |
- /*
- * OMAP hardware spinlock driver
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- *
- * Contact: Simon Que <sque@ti.com>
- * Hari Kanigeri <h-kanigeri2@ti.com>
- * Ohad Ben-Cohen <ohad@wizery.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/device.h>
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/bitops.h>
- #include <linux/pm_runtime.h>
- #include <linux/slab.h>
- #include <linux/spinlock.h>
- #include <linux/hwspinlock.h>
- #include <linux/platform_device.h>
- #include "hwspinlock_internal.h"
- /* Spinlock register offsets */
- #define SYSSTATUS_OFFSET 0x0014
- #define LOCK_BASE_OFFSET 0x0800
- #define SPINLOCK_NUMLOCKS_BIT_OFFSET (24)
- /* Possible values of SPINLOCK_LOCK_REG */
- #define SPINLOCK_NOTTAKEN (0) /* free */
- #define SPINLOCK_TAKEN (1) /* locked */
- #define to_omap_hwspinlock(lock) \
- container_of(lock, struct omap_hwspinlock, lock)
- struct omap_hwspinlock {
- struct hwspinlock lock;
- void __iomem *addr;
- };
- struct omap_hwspinlock_state {
- int num_locks; /* Total number of locks in system */
- void __iomem *io_base; /* Mapped base address */
- };
- static int omap_hwspinlock_trylock(struct hwspinlock *lock)
- {
- struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
- /* attempt to acquire the lock by reading its value */
- return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr));
- }
- static void omap_hwspinlock_unlock(struct hwspinlock *lock)
- {
- struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
- /* release the lock by writing 0 to it */
- writel(SPINLOCK_NOTTAKEN, omap_lock->addr);
- }
- /*
- * relax the OMAP interconnect while spinning on it.
- *
- * The specs recommended that the retry delay time will be
- * just over half of the time that a requester would be
- * expected to hold the lock.
- *
- * The number below is taken from an hardware specs example,
- * obviously it is somewhat arbitrary.
- */
- static void omap_hwspinlock_relax(struct hwspinlock *lock)
- {
- ndelay(50);
- }
- static const struct hwspinlock_ops omap_hwspinlock_ops = {
- .trylock = omap_hwspinlock_trylock,
- .unlock = omap_hwspinlock_unlock,
- .relax = omap_hwspinlock_relax,
- };
- static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
- {
- struct omap_hwspinlock *omap_lock;
- struct omap_hwspinlock_state *state;
- struct hwspinlock *lock;
- struct resource *res;
- void __iomem *io_base;
- int i, ret;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
- state = kzalloc(sizeof(*state), GFP_KERNEL);
- if (!state)
- return -ENOMEM;
- io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- ret = -ENOMEM;
- goto free_state;
- }
- /* Determine number of locks */
- i = readl(io_base + SYSSTATUS_OFFSET);
- i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
- /* one of the four lsb's must be set, and nothing else */
- if (hweight_long(i & 0xf) != 1 || i > 8) {
- ret = -EINVAL;
- goto iounmap_base;
- }
- state->num_locks = i * 32;
- state->io_base = io_base;
- platform_set_drvdata(pdev, state);
- /*
- * runtime PM will make sure the clock of this module is
- * enabled iff at least one lock is requested
- */
- pm_runtime_enable(&pdev->dev);
- for (i = 0; i < state->num_locks; i++) {
- omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL);
- if (!omap_lock) {
- ret = -ENOMEM;
- goto free_locks;
- }
- omap_lock->lock.dev = &pdev->dev;
- omap_lock->lock.owner = THIS_MODULE;
- omap_lock->lock.id = i;
- omap_lock->lock.ops = &omap_hwspinlock_ops;
- omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
- ret = hwspin_lock_register(&omap_lock->lock);
- if (ret) {
- kfree(omap_lock);
- goto free_locks;
- }
- }
- return 0;
- free_locks:
- while (--i >= 0) {
- lock = hwspin_lock_unregister(i);
- /* this should't happen, but let's give our best effort */
- if (!lock) {
- dev_err(&pdev->dev, "%s: cleanups failed\n", __func__);
- continue;
- }
- omap_lock = to_omap_hwspinlock(lock);
- kfree(omap_lock);
- }
- pm_runtime_disable(&pdev->dev);
- iounmap_base:
- iounmap(io_base);
- free_state:
- kfree(state);
- return ret;
- }
- static int omap_hwspinlock_remove(struct platform_device *pdev)
- {
- struct omap_hwspinlock_state *state = platform_get_drvdata(pdev);
- struct hwspinlock *lock;
- struct omap_hwspinlock *omap_lock;
- int i;
- for (i = 0; i < state->num_locks; i++) {
- lock = hwspin_lock_unregister(i);
- /* this shouldn't happen at this point. if it does, at least
- * don't continue with the remove */
- if (!lock) {
- dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i);
- return -EBUSY;
- }
- omap_lock = to_omap_hwspinlock(lock);
- kfree(omap_lock);
- }
- pm_runtime_disable(&pdev->dev);
- iounmap(state->io_base);
- kfree(state);
- return 0;
- }
- static struct platform_driver omap_hwspinlock_driver = {
- .probe = omap_hwspinlock_probe,
- .remove = omap_hwspinlock_remove,
- .driver = {
- .name = "omap_hwspinlock",
- },
- };
- static int __init omap_hwspinlock_init(void)
- {
- return platform_driver_register(&omap_hwspinlock_driver);
- }
- /* board init code might need to reserve hwspinlocks for predefined purposes */
- postcore_initcall(omap_hwspinlock_init);
- static void __exit omap_hwspinlock_exit(void)
- {
- platform_driver_unregister(&omap_hwspinlock_driver);
- }
- module_exit(omap_hwspinlock_exit);
- MODULE_LICENSE("GPL v2");
- MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
- MODULE_AUTHOR("Simon Que <sque@ti.com>");
- MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
- MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");
|