123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186 |
- /*
- * linux/kernel/irq/autoprobe.c
- *
- * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
- *
- * This file contains the interrupt probing code and driver APIs.
- */
- #include <linux/irq.h>
- #include <linux/module.h>
- #include <linux/interrupt.h>
- #include <linux/delay.h>
- #include <linux/async.h>
- #include "internals.h"
- /*
- * Autodetection depends on the fact that any interrupt that
- * comes in on to an unassigned handler will get stuck with
- * "IRQS_WAITING" cleared and the interrupt disabled.
- */
- static DEFINE_MUTEX(probing_active);
- /**
- * probe_irq_on - begin an interrupt autodetect
- *
- * Commence probing for an interrupt. The interrupts are scanned
- * and a mask of potential interrupt lines is returned.
- *
- */
- unsigned long probe_irq_on(void)
- {
- struct irq_desc *desc;
- unsigned long mask = 0;
- int i;
- /*
- * quiesce the kernel, or at least the asynchronous portion
- */
- async_synchronize_full();
- mutex_lock(&probing_active);
- /*
- * something may have generated an irq long ago and we want to
- * flush such a longstanding irq before considering it as spurious.
- */
- for_each_irq_desc_reverse(i, desc) {
- raw_spin_lock_irq(&desc->lock);
- if (!desc->action && irq_settings_can_probe(desc)) {
- /*
- * Some chips need to know about probing in
- * progress:
- */
- if (desc->irq_data.chip->irq_set_type)
- desc->irq_data.chip->irq_set_type(&desc->irq_data,
- IRQ_TYPE_PROBE);
- irq_startup(desc, false);
- }
- raw_spin_unlock_irq(&desc->lock);
- }
- /* Wait for longstanding interrupts to trigger. */
- msleep(20);
- /*
- * enable any unassigned irqs
- * (we must startup again here because if a longstanding irq
- * happened in the previous stage, it may have masked itself)
- */
- for_each_irq_desc_reverse(i, desc) {
- raw_spin_lock_irq(&desc->lock);
- if (!desc->action && irq_settings_can_probe(desc)) {
- desc->istate |= IRQS_AUTODETECT | IRQS_WAITING;
- if (irq_startup(desc, false))
- desc->istate |= IRQS_PENDING;
- }
- raw_spin_unlock_irq(&desc->lock);
- }
- /*
- * Wait for spurious interrupts to trigger
- */
- msleep(100);
- /*
- * Now filter out any obviously spurious interrupts
- */
- for_each_irq_desc(i, desc) {
- raw_spin_lock_irq(&desc->lock);
- if (desc->istate & IRQS_AUTODETECT) {
- /* It triggered already - consider it spurious. */
- if (!(desc->istate & IRQS_WAITING)) {
- desc->istate &= ~IRQS_AUTODETECT;
- irq_shutdown(desc);
- } else
- if (i < 32)
- mask |= 1 << i;
- }
- raw_spin_unlock_irq(&desc->lock);
- }
- return mask;
- }
- EXPORT_SYMBOL(probe_irq_on);
- /**
- * probe_irq_mask - scan a bitmap of interrupt lines
- * @val: mask of interrupts to consider
- *
- * Scan the interrupt lines and return a bitmap of active
- * autodetect interrupts. The interrupt probe logic state
- * is then returned to its previous value.
- *
- * Note: we need to scan all the irq's even though we will
- * only return autodetect irq numbers - just so that we reset
- * them all to a known state.
- */
- unsigned int probe_irq_mask(unsigned long val)
- {
- unsigned int mask = 0;
- struct irq_desc *desc;
- int i;
- for_each_irq_desc(i, desc) {
- raw_spin_lock_irq(&desc->lock);
- if (desc->istate & IRQS_AUTODETECT) {
- if (i < 16 && !(desc->istate & IRQS_WAITING))
- mask |= 1 << i;
- desc->istate &= ~IRQS_AUTODETECT;
- irq_shutdown(desc);
- }
- raw_spin_unlock_irq(&desc->lock);
- }
- mutex_unlock(&probing_active);
- return mask & val;
- }
- EXPORT_SYMBOL(probe_irq_mask);
- /**
- * probe_irq_off - end an interrupt autodetect
- * @val: mask of potential interrupts (unused)
- *
- * Scans the unused interrupt lines and returns the line which
- * appears to have triggered the interrupt. If no interrupt was
- * found then zero is returned. If more than one interrupt is
- * found then minus the first candidate is returned to indicate
- * their is doubt.
- *
- * The interrupt probe logic state is returned to its previous
- * value.
- *
- * BUGS: When used in a module (which arguably shouldn't happen)
- * nothing prevents two IRQ probe callers from overlapping. The
- * results of this are non-optimal.
- */
- int probe_irq_off(unsigned long val)
- {
- int i, irq_found = 0, nr_of_irqs = 0;
- struct irq_desc *desc;
- for_each_irq_desc(i, desc) {
- raw_spin_lock_irq(&desc->lock);
- if (desc->istate & IRQS_AUTODETECT) {
- if (!(desc->istate & IRQS_WAITING)) {
- if (!nr_of_irqs)
- irq_found = i;
- nr_of_irqs++;
- }
- desc->istate &= ~IRQS_AUTODETECT;
- irq_shutdown(desc);
- }
- raw_spin_unlock_irq(&desc->lock);
- }
- mutex_unlock(&probing_active);
- if (nr_of_irqs > 1)
- irq_found = -irq_found;
- return irq_found;
- }
- EXPORT_SYMBOL(probe_irq_off);
|