musb_io.h 4.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142
  1. /*
  2. * MUSB OTG driver register I/O
  3. *
  4. * Copyright 2005 Mentor Graphics Corporation
  5. * Copyright (C) 2005-2006 by Texas Instruments
  6. * Copyright (C) 2006-2007 Nokia Corporation
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License
  10. * version 2 as published by the Free Software Foundation.
  11. *
  12. * This program is distributed in the hope that it will be useful, but
  13. * WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  15. * General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software
  19. * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20. * 02110-1301 USA
  21. *
  22. * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  23. * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24. * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  25. * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  26. * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27. * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28. * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29. * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30. * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31. * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32. *
  33. */
  34. #ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
  35. #define __MUSB_LINUX_PLATFORM_ARCH_H__
  36. #include <linux/io.h>
  37. #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
  38. && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
  39. && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN)
  40. static inline void readsl(const void __iomem *addr, void *buf, int len)
  41. { insl((unsigned long)addr, buf, len); }
  42. static inline void readsw(const void __iomem *addr, void *buf, int len)
  43. { insw((unsigned long)addr, buf, len); }
  44. static inline void readsb(const void __iomem *addr, void *buf, int len)
  45. { insb((unsigned long)addr, buf, len); }
  46. static inline void writesl(const void __iomem *addr, const void *buf, int len)
  47. { outsl((unsigned long)addr, buf, len); }
  48. static inline void writesw(const void __iomem *addr, const void *buf, int len)
  49. { outsw((unsigned long)addr, buf, len); }
  50. static inline void writesb(const void __iomem *addr, const void *buf, int len)
  51. { outsb((unsigned long)addr, buf, len); }
  52. #endif
  53. #ifndef CONFIG_BLACKFIN
  54. /* NOTE: these offsets are all in bytes */
  55. static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
  56. { return __raw_readw(addr + offset); }
  57. static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
  58. { return __raw_readl(addr + offset); }
  59. static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
  60. { __raw_writew(data, addr + offset); }
  61. static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
  62. { __raw_writel(data, addr + offset); }
  63. #ifdef CONFIG_USB_MUSB_TUSB6010
  64. /*
  65. * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
  66. */
  67. static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
  68. {
  69. u16 tmp;
  70. u8 val;
  71. tmp = __raw_readw(addr + (offset & ~1));
  72. if (offset & 1)
  73. val = (tmp >> 8);
  74. else
  75. val = tmp & 0xff;
  76. return val;
  77. }
  78. static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
  79. {
  80. u16 tmp;
  81. tmp = __raw_readw(addr + (offset & ~1));
  82. if (offset & 1)
  83. tmp = (data << 8) | (tmp & 0xff);
  84. else
  85. tmp = (tmp & 0xff00) | data;
  86. __raw_writew(tmp, addr + (offset & ~1));
  87. }
  88. #else
  89. static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
  90. { return __raw_readb(addr + offset); }
  91. static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
  92. { __raw_writeb(data, addr + offset); }
  93. #endif /* CONFIG_USB_MUSB_TUSB6010 */
  94. #else
  95. static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
  96. { return (u8) (bfin_read16(addr + offset)); }
  97. static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
  98. { return bfin_read16(addr + offset); }
  99. static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
  100. { return (u32) (bfin_read16(addr + offset)); }
  101. static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
  102. { bfin_write16(addr + offset, (u16) data); }
  103. static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
  104. { bfin_write16(addr + offset, data); }
  105. static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
  106. { bfin_write16(addr + offset, (u16) data); }
  107. #endif /* CONFIG_BLACKFIN */
  108. #endif