amlogic-aml8726-mx-kernel/drivers/staging/bcm/DDRInit.c

#include "headers.h"



#define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00
#define MIPS_CLOCK_REG 	0x0f000820

    //DDR INIT-133Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12  //index for 0x0F007000
static DDR_SET_NODE asT3_DDRSetting133MHz[]= {//      # DPLL Clock Setting
                                        {0x0F000800,0x00007212},
                                        {0x0f000820,0x07F13FFF},
                                        {0x0f000810,0x00000F95},
                                        {0x0f000860,0x00000000},
                                        {0x0f000880,0x000003DD},
                                        // Changed source for X-bar and MIPS clock to APLL
                                        {0x0f000840,0x0FFF1B00},
                                        {0x0f000870,0x00000002},
                                        {0x0F00a044,0x1fffffff},
                                        {0x0F00a040,0x1f000000},
                                        {0x0F00a084,0x1Cffffff},
                                        {0x0F00a080,0x1C000000},
                                        {0x0F00a04C,0x0000000C},
                                        //Memcontroller Default values
                                        {0x0F007000,0x00010001},
                                        {0x0F007004,0x01010100},
                                        {0x0F007008,0x01000001},
                                        {0x0F00700c,0x00000000},
                                        {0x0F007010,0x01000000},
                                        {0x0F007014,0x01000100},
                                        {0x0F007018,0x01000000},
                                        {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
                                        {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
                                        {0x0F007024,0x02000007},
                                        {0x0F007028,0x02020202},
                                        {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
                                        {0x0F007030,0x05000000},
                                        {0x0F007034,0x00000003},
                                        {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
                                        {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
                                        {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
                                        {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
                                        {0x0F007048,0x081b0306},
                                        {0x0F00704c,0x00000000},
                                        {0x0F007050,0x0000001c},
                                        {0x0F007054,0x00000000},
                                        {0x0F007058,0x00000000},
                                        {0x0F00705c,0x00000000},
                                        {0x0F007060,0x0010246c},
                                        {0x0F007064,0x00000010},
                                        {0x0F007068,0x00000000},
                                        {0x0F00706c,0x00000001},
                                        {0x0F007070,0x00007000},
                                        {0x0F007074,0x00000000},
                                        {0x0F007078,0x00000000},
                                        {0x0F00707C,0x00000000},
                                        {0x0F007080,0x00000000},
                                        {0x0F007084,0x00000000},
                                        //# Enable BW improvement within memory controller
                                        {0x0F007094,0x00000104},
                                        //# Enable 2 ports within X-bar
                                        {0x0F00A000,0x00000016},
                                        //# Enable start bit within memory controller
                                        {0x0F007018,0x01010000}
                                        };
//80Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10  //index for 0x0F007000
static DDR_SET_NODE asT3_DDRSetting80MHz[]= {//   # DPLL Clock Setting
                                        {0x0f000810,0x00000F95},
                                        {0x0f000820,0x07f1ffff},
                                        {0x0f000860,0x00000000},
                                        {0x0f000880,0x000003DD},
                                        {0x0F00a044,0x1fffffff},
                                        {0x0F00a040,0x1f000000},
                                        {0x0F00a084,0x1Cffffff},
                                        {0x0F00a080,0x1C000000},
                                        {0x0F00a000,0x00000016},
                                        {0x0F00a04C,0x0000000C},
                                //Memcontroller Default values
                                        {0x0F007000,0x00010001},
                                        {0x0F007004,0x01000000},
                                        {0x0F007008,0x01000001},
                                        {0x0F00700c,0x00000000},
                                        {0x0F007010,0x01000000},
                                        {0x0F007014,0x01000100},
                                        {0x0F007018,0x01000000},
                                        {0x0F00701c,0x01020000},
                                        {0x0F007020,0x04020107},
                                        {0x0F007024,0x00000007},
                                        {0x0F007028,0x02020201},
                                        {0x0F00702c,0x0204040a},
                                        {0x0F007030,0x04000000},
                                        {0x0F007034,0x00000002},
                                        {0x0F007038,0x1F060200},
                                        {0x0F00703C,0x1C22221F},
                                        {0x0F007040,0x8A006600},
                                        {0x0F007044,0x221a0800},
                                        {0x0F007048,0x02690204},
                                        {0x0F00704c,0x00000000},
                                        {0x0F007050,0x0000001c},
                                        {0x0F007054,0x00000000},
                                        {0x0F007058,0x00000000},
                                        {0x0F00705c,0x00000000},
                                        {0x0F007060,0x000A15D6},
                                        {0x0F007064,0x0000000A},
                                        {0x0F007068,0x00000000},
                                        {0x0F00706c,0x00000001},
                                        {0x0F007070,0x00004000},
                                        {0x0F007074,0x00000000},
                                        {0x0F007078,0x00000000},
                                        {0x0F00707C,0x00000000},
                                        {0x0F007080,0x00000000},
                                        {0x0F007084,0x00000000},
                                        {0x0F007094,0x00000104},
                                        //# Enable start bit within memory controller
										{0x0F007018,0x01010000}
                                };
//100Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13  //index for 0x0F007000
static DDR_SET_NODE asT3_DDRSetting100MHz[]= {//  # DPLL Clock Setting
                                        {0x0F000800,0x00007008},
                                        {0x0f000810,0x00000F95},
                                        {0x0f000820,0x07F13E3F},
                                        {0x0f000860,0x00000000},
                                        {0x0f000880,0x000003DD},
                                // Changed source for X-bar and MIPS clock to APLL
                                //0x0f000840,0x0FFF1800,
                                        {0x0f000840,0x0FFF1B00},
                                        {0x0f000870,0x00000002},
                                        {0x0F00a044,0x1fffffff},
                                        {0x0F00a040,0x1f000000},
                                        {0x0F00a084,0x1Cffffff},
                                        {0x0F00a080,0x1C000000},
                                        {0x0F00a04C,0x0000000C},
                                //# Enable 2 ports within X-bar
                                        {0x0F00A000,0x00000016},
                                //Memcontroller Default values
                                        {0x0F007000,0x00010001},
                                        {0x0F007004,0x01010100},
                                        {0x0F007008,0x01000001},
                                        {0x0F00700c,0x00000000},
                                        {0x0F007010,0x01000000},
                                        {0x0F007014,0x01000100},
                                        {0x0F007018,0x01000000},
                                        {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
                                        {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
                                        {0x0F007024,0x00000007},
                                        {0x0F007028,0x01020201},
                                        {0x0F00702c,0x0204040A},
                                        {0x0F007030,0x06000000},
                                        {0x0F007034,0x00000004},
                                        {0x0F007038,0x20080200},
                                        {0x0F00703C,0x02030320},
                                        {0x0F007040,0x6E7F1200},
                                        {0x0F007044,0x01190A00},
                                        {0x0F007048,0x06120305},//0x02690204 // 0x06120305
                                        {0x0F00704c,0x00000000},
                                        {0x0F007050,0x0000001C},
                                        {0x0F007054,0x00000000},
                                        {0x0F007058,0x00000000},
                                        {0x0F00705c,0x00000000},
                                        {0x0F007060,0x00082ED6},
                                        {0x0F007064,0x0000000A},
                                        {0x0F007068,0x00000000},
                                        {0x0F00706c,0x00000001},
                                        {0x0F007070,0x00005000},
                                        {0x0F007074,0x00000000},
                                        {0x0F007078,0x00000000},
                                        {0x0F00707C,0x00000000},
                                        {0x0F007080,0x00000000},
                                        {0x0F007084,0x00000000},
                                //# Enable BW improvement within memory controller
                                        {0x0F007094,0x00000104},
                                //# Enable start bit within memory controller
                                        {0x0F007018,0x01010000}
                                };

//Net T3B DDR Settings
//DDR INIT-133Mhz
static DDR_SET_NODE asDPLL_266MHZ[] = {
                                        {0x0F000800,0x00007212},
                                        {0x0f000820,0x07F13FFF},
                                        {0x0f000810,0x00000F95},
                                        {0x0f000860,0x00000000},
                                        {0x0f000880,0x000003DD},
                                        // Changed source for X-bar and MIPS clock to APLL
                                        {0x0f000840,0x0FFF1B00},
                                        {0x0f000870,0x00000002}
									  };

#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11  //index for 0x0F007000
static DDR_SET_NODE asT3B_DDRSetting133MHz[] = {//      # DPLL Clock Setting
                                        {0x0f000810,0x00000F95},
                                        {0x0f000810,0x00000F95},
                                        {0x0f000810,0x00000F95},
                                        {0x0f000820,0x07F13652},
                                        {0x0f000840,0x0FFF0800},
                                        // Changed source for X-bar and MIPS clock to APLL
                                        {0x0f000880,0x000003DD},
                                        {0x0f000860,0x00000000},
                                        // Changed source for X-bar and MIPS clock to APLL
                                        {0x0F00a044,0x1fffffff},
                                        {0x0F00a040,0x1f000000},
                                        {0x0F00a084,0x1Cffffff},
                                        {0x0F00a080,0x1C000000},
                                        //# Enable 2 ports within X-bar
                                        {0x0F00A000,0x00000016},
                                        //Memcontroller Default values
                                        {0x0F007000,0x00010001},
                                        {0x0F007004,0x01010100},
                                        {0x0F007008,0x01000001},
                                        {0x0F00700c,0x00000000},
                                        {0x0F007010,0x01000000},
                                        {0x0F007014,0x01000100},
                                        {0x0F007018,0x01000000},
                                        {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
                                        {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
                                        {0x0F007024,0x02000007},
                                        {0x0F007028,0x02020202},
                                        {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
                                        {0x0F007030,0x05000000},
                                        {0x0F007034,0x00000003},
                                        {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
                                        {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
                                        {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
                                        {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
                                        {0x0F007048,0x040D0306},
                                        {0x0F00704c,0x00000000},
                                        {0x0F007050,0x0000001c},
                                        {0x0F007054,0x00000000},
                                        {0x0F007058,0x00000000},
                                        {0x0F00705c,0x00000000},
                                        {0x0F007060,0x0010246c},
                                        {0x0F007064,0x00000012},
                                        {0x0F007068,0x00000000},
                                        {0x0F00706c,0x00000001},
                                        {0x0F007070,0x00007000},
                                        {0x0F007074,0x00000000},
                                        {0x0F007078,0x00000000},
                                        {0x0F00707C,0x00000000},
                                        {0x0F007080,0x00000000},
                                        {0x0F007084,0x00000000},
                                        //# Enable BW improvement within memory controller
                                        {0x0F007094,0x00000104},
                                        //# Enable start bit within memory controller
                                        {0x0F007018,0x01010000},
                                        };

#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9  //index for 0x0F007000
static DDR_SET_NODE asT3B_DDRSetting80MHz[] = {//       # DPLL Clock Setting
										{0x0f000810,0x00000F95},
										{0x0f000820,0x07F13FFF},
										{0x0f000840,0x0FFF1F00},
										{0x0f000880,0x000003DD},
										{0x0f000860,0x00000000},

										{0x0F00a044,0x1fffffff},
										{0x0F00a040,0x1f000000},
										{0x0F00a084,0x1Cffffff},
										{0x0F00a080,0x1C000000},
										{0x0F00a000,0x00000016},
										//Memcontroller Default values
										{0x0F007000,0x00010001},
										{0x0F007004,0x01000000},
										{0x0F007008,0x01000001},
										{0x0F00700c,0x00000000},
										{0x0F007010,0x01000000},
										{0x0F007014,0x01000100},
										{0x0F007018,0x01000000},
										{0x0F00701c,0x01020000},
										{0x0F007020,0x04020107},
										{0x0F007024,0x00000007},
										{0x0F007028,0x02020201},
										{0x0F00702c,0x0204040a},
										{0x0F007030,0x04000000},
										{0x0F007034,0x02000002},
										{0x0F007038,0x1F060202},
										{0x0F00703C,0x1C22221F},
										{0x0F007040,0x8A006600},
										{0x0F007044,0x221a0800},
										{0x0F007048,0x02690204},
										{0x0F00704c,0x00000000},
										{0x0F007050,0x0100001c},
										{0x0F007054,0x00000000},
										{0x0F007058,0x00000000},
										{0x0F00705c,0x00000000},
										{0x0F007060,0x000A15D6},
										{0x0F007064,0x0000000A},
										{0x0F007068,0x00000000},
										{0x0F00706c,0x00000001},
										{0x0F007070,0x00004000},
										{0x0F007074,0x00000000},
										{0x0F007078,0x00000000},
										{0x0F00707C,0x00000000},
										{0x0F007080,0x00000000},
										{0x0F007084,0x00000000},
										{0x0F007094,0x00000104},
										//# Enable start bit within memory controller
										{0x0F007018,0x01010000}
								};

//100Mhz
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9  //index for 0x0F007000
static DDR_SET_NODE asT3B_DDRSetting100MHz[] = {//      # DPLL Clock Setting
										{0x0f000810,0x00000F95},
										{0x0f000820,0x07F1369B},
										{0x0f000840,0x0FFF0800},
										{0x0f000880,0x000003DD},
										{0x0f000860,0x00000000},
										{0x0F00a044,0x1fffffff},
										{0x0F00a040,0x1f000000},
										{0x0F00a084,0x1Cffffff},
										{0x0F00a080,0x1C000000},
										//# Enable 2 ports within X-bar
										{0x0F00A000,0x00000016},
								//Memcontroller Default values
										{0x0F007000,0x00010001},
										{0x0F007004,0x01010100},
										{0x0F007008,0x01000001},
										{0x0F00700c,0x00000000},
										{0x0F007010,0x01000000},
										{0x0F007014,0x01000100},
										{0x0F007018,0x01000000},
										{0x0F00701c,0x01020000}, // POP - 0x00020000 Normal 0x01020000
										{0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
										{0x0F007024,0x00000007},
										{0x0F007028,0x01020201},
										{0x0F00702c,0x0204040A},
										{0x0F007030,0x06000000},
										{0x0F007034,0x02000004},
										{0x0F007038,0x20080200},
										{0x0F00703C,0x02030320},
										{0x0F007040,0x6E7F1200},
										{0x0F007044,0x01190A00},
										{0x0F007048,0x06120305},//0x02690204 // 0x06120305
										{0x0F00704c,0x00000000},
										{0x0F007050,0x0100001C},
										{0x0F007054,0x00000000},
										{0x0F007058,0x00000000},
										{0x0F00705c,0x00000000},
										{0x0F007060,0x00082ED6},
										{0x0F007064,0x0000000A},
										{0x0F007068,0x00000000},
										{0x0F00706c,0x00000001},
										{0x0F007070,0x00005000},
										{0x0F007074,0x00000000},
										{0x0F007078,0x00000000},
										{0x0F00707C,0x00000000},
										{0x0F007080,0x00000000},
										{0x0F007084,0x00000000},
								//# Enable BW improvement within memory controller
										{0x0F007094,0x00000104},
								//# Enable start bit within memory controller
										{0x0F007018,0x01010000}
							};


#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9  //index for 0x0F007000
static DDR_SET_NODE asT3LP_DDRSetting133MHz[]= {//	# DPLL Clock Setting
								{0x0f000820,0x03F1365B},
								{0x0f000810,0x00002F95},
								{0x0f000880,0x000003DD},
								// Changed source for X-bar and MIPS clock to APLL
								{0x0f000840,0x0FFF0000},
								{0x0f000860,0x00000000},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0F00a084,0x1Cffffff},
								{0x0F00a080,0x1C000000},
								{0x0F00A000,0x00000016},
								//Memcontroller Default values
								{0x0F007000,0x00010001},
								{0x0F007004,0x01010100},
								{0x0F007008,0x01000001},
								{0x0F00700c,0x00000000},
								{0x0F007010,0x01000000},
								{0x0F007014,0x01000100},
								{0x0F007018,0x01000000},
								{0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
								{0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
								{0x0F007024,0x02000007},
								{0x0F007028,0x02020200},
								{0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
								{0x0F007030,0x05000000},
								{0x0F007034,0x00000003},
								{0x0F007038,0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
								{0x0F00703C,0x02101020},//ROB - 0x02101010,//0x02101018,
								{0x0F007040,0x45711200},//ROB - 0x45751200,//0x450f1200,
								{0x0F007044,0x110D0D00},//ROB - 0x110a0d00//0x111f0d00
								{0x0F007048,0x04080306},
								{0x0F00704c,0x00000000},
								{0x0F007050,0x0100001c},
								{0x0F007054,0x00000000},
								{0x0F007058,0x00000000},
								{0x0F00705c,0x00000000},
								{0x0F007060,0x0010245F},
								{0x0F007064,0x00000010},
								{0x0F007068,0x00000000},
								{0x0F00706c,0x00000001},
								{0x0F007070,0x00007000},
								{0x0F007074,0x00000000},
								{0x0F007078,0x00000000},
								{0x0F00707C,0x00000000},
								{0x0F007080,0x00000000},
								{0x0F007084,0x00000000},
								{0x0F007088,0x01000001},
								{0x0F00708c,0x00000101},
								{0x0F007090,0x00000000},
								//# Enable BW improvement within memory controller
								{0x0F007094,0x00040000},
								{0x0F007098,0x00000000},
								{0x0F0070c8,0x00000104},
								//# Enable 2 ports within X-bar
								//# Enable start bit within memory controller
								{0x0F007018,0x01010000}
};

#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11  //index for 0x0F007000
static DDR_SET_NODE asT3LP_DDRSetting100MHz[]= {//	# DPLL Clock Setting
								{0x0f000810,0x00002F95},
								{0x0f000820,0x03F1369B},
								{0x0f000840,0x0fff0000},
								{0x0f000860,0x00000000},
								{0x0f000880,0x000003DD},
								// Changed source for X-bar and MIPS clock to APLL
								{0x0f000840,0x0FFF0000},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0F00a084,0x1Cffffff},
								{0x0F00a080,0x1C000000},
								//Memcontroller Default values
								{0x0F007000,0x00010001},
								{0x0F007004,0x01010100},
								{0x0F007008,0x01000001},
								{0x0F00700c,0x00000000},
								{0x0F007010,0x01000000},
								{0x0F007014,0x01000100},
								{0x0F007018,0x01000000},
								{0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001
								{0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107
								{0x0F007024,0x00000007},
								{0x0F007028,0x01020200},
								{0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a
								{0x0F007030,0x06000000},
								{0x0F007034,0x00000004},
								{0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
								{0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018,
								{0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200,
								{0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
								{0x0F007048,0x03000305},
								{0x0F00704c,0x00000000},
								{0x0F007050,0x0100001c},
								{0x0F007054,0x00000000},
								{0x0F007058,0x00000000},
								{0x0F00705c,0x00000000},
								{0x0F007060,0x00082ED6},
								{0x0F007064,0x0000000A},
								{0x0F007068,0x00000000},
								{0x0F00706c,0x00000001},
								{0x0F007070,0x00005000},
								{0x0F007074,0x00000000},
								{0x0F007078,0x00000000},
								{0x0F00707C,0x00000000},
								{0x0F007080,0x00000000},
								{0x0F007084,0x00000000},
								{0x0F007088,0x01000001},
								{0x0F00708c,0x00000101},
								{0x0F007090,0x00000000},
								{0x0F007094,0x00010000},
								{0x0F007098,0x00000000},
								{0x0F0070C8,0x00000104},
								//# Enable 2 ports within X-bar
								{0x0F00A000,0x00000016},
								//# Enable start bit within memory controller
								{0x0F007018,0x01010000}
};

#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9  //index for 0x0F007000
static DDR_SET_NODE asT3LP_DDRSetting80MHz[]= {//	# DPLL Clock Setting
								{0x0f000820,0x07F13FFF},
								{0x0f000810,0x00002F95},
								{0x0f000860,0x00000000},
								{0x0f000880,0x000003DD},
								{0x0f000840,0x0FFF1F00},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0F00a084,0x1Cffffff},
								{0x0F00a080,0x1C000000},
								{0x0F00A000,0x00000016},
								{0x0f007000,0x00010001},
								{0x0f007004,0x01000000},
								{0x0f007008,0x01000001},
								{0x0f00700c,0x00000000},
								{0x0f007010,0x01000000},
								{0x0f007014,0x01000100},
								{0x0f007018,0x01000000},
								{0x0f00701c,0x01020000},
								{0x0f007020,0x04020107},
								{0x0f007024,0x00000007},
								{0x0f007028,0x02020200},
								{0x0f00702c,0x0204040a},
								{0x0f007030,0x04000000},
								{0x0f007034,0x00000002},
								{0x0f007038,0x1d060200},
								{0x0f00703c,0x1c22221d},
								{0x0f007040,0x8A116600},
								{0x0f007044,0x222d0800},
								{0x0f007048,0x02690204},
								{0x0f00704c,0x00000000},
								{0x0f007050,0x0100001c},
								{0x0f007054,0x00000000},
								{0x0f007058,0x00000000},
								{0x0f00705c,0x00000000},
								{0x0f007060,0x000A15D6},
								{0x0f007064,0x0000000A},
								{0x0f007068,0x00000000},
								{0x0f00706c,0x00000001},
								{0x0f007070,0x00004000},
								{0x0f007074,0x00000000},
								{0x0f007078,0x00000000},
								{0x0f00707c,0x00000000},
								{0x0f007080,0x00000000},
								{0x0f007084,0x00000000},
								{0x0f007088,0x01000001},
								{0x0f00708c,0x00000101},
								{0x0f007090,0x00000000},
								{0x0f007094,0x00010000},
								{0x0f007098,0x00000000},
								{0x0F0070C8,0x00000104},
								{0x0F007018,0x01010000}
};




///T3 LP-B (UMA-B)

#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7  //index for 0x0F007000
static DDR_SET_NODE asT3LPB_DDRSetting160MHz[]= {//	# DPLL Clock Setting

								{0x0f000820,0x03F137DB},
								{0x0f000810,0x01842795},
								{0x0f000860,0x00000000},
								{0x0f000880,0x000003DD},
								{0x0f000840,0x0FFF0400},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0f003050,0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz
								{0x0F00a084,0x1Cffffff},//Now dump from her in internal memory
								{0x0F00a080,0x1C000000},
								{0x0F00A000,0x00000016},
								{0x0f007000,0x00010001},
								{0x0f007004,0x01000001},
								{0x0f007008,0x01000101},
								{0x0f00700c,0x00000000},
								{0x0f007010,0x01000100},
								{0x0f007014,0x01000100},
								{0x0f007018,0x01000000},
								{0x0f00701c,0x01020000},
								{0x0f007020,0x04030107},
								{0x0f007024,0x02000007},
								{0x0f007028,0x02020200},
								{0x0f00702c,0x0206060a},
								{0x0f007030,0x050d0d00},
								{0x0f007034,0x00000003},
								{0x0f007038,0x170a0200},
								{0x0f00703c,0x02101012},
								{0x0f007040,0x45161200},
								{0x0f007044,0x11250c00},
								{0x0f007048,0x04da0307},
								{0x0f00704c,0x00000000},
								{0x0f007050,0x0000001c},
								{0x0f007054,0x00000000},
								{0x0f007058,0x00000000},
								{0x0f00705c,0x00000000},
								{0x0f007060,0x00142bb6},
								{0x0f007064,0x20430014},
								{0x0f007068,0x00000000},
								{0x0f00706c,0x00000001},
								{0x0f007070,0x00009000},
								{0x0f007074,0x00000000},
								{0x0f007078,0x00000000},
								{0x0f00707c,0x00000000},
								{0x0f007080,0x00000000},
								{0x0f007084,0x00000000},
								{0x0f007088,0x01000001},
								{0x0f00708c,0x00000101},
								{0x0f007090,0x00000000},
								{0x0f007094,0x00040000},
								{0x0f007098,0x00000000},
								{0x0F0070C8,0x00000104},
								{0x0F007018,0x01010000}
};


#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7  //index for 0x0F007000
static DDR_SET_NODE asT3LPB_DDRSetting133MHz[]= {//	# DPLL Clock Setting
								{0x0f000820,0x03F1365B},
								{0x0f000810,0x00002F95},
								{0x0f000880,0x000003DD},
								// Changed source for X-bar and MIPS clock to APLL
								{0x0f000840,0x0FFF0000},
								{0x0f000860,0x00000000},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
								{0x0F00a084,0x1Cffffff},//dump from here in internal memory
								{0x0F00a080,0x1C000000},
								{0x0F00A000,0x00000016},
								//Memcontroller Default values
								{0x0F007000,0x00010001},
								{0x0F007004,0x01010100},
								{0x0F007008,0x01000001},
								{0x0F00700c,0x00000000},
								{0x0F007010,0x01000000},
								{0x0F007014,0x01000100},
								{0x0F007018,0x01000000},
								{0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
								{0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
								{0x0F007024,0x02000007},
								{0x0F007028,0x02020200},
								{0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
								{0x0F007030,0x05000000},
								{0x0F007034,0x00000003},
								{0x0F007038,0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
								{0x0F00703C,0x02101017},//ROB - 0x02101010,//0x02101018,
								{0x0F007040,0x45171200},//ROB - 0x45751200,//0x450f1200,
								{0x0F007044,0x11290D00},//ROB - 0x110a0d00//0x111f0d00
								{0x0F007048,0x04080306},
								{0x0F00704c,0x00000000},
								{0x0F007050,0x0100001c},
								{0x0F007054,0x00000000},
								{0x0F007058,0x00000000},
								{0x0F00705c,0x00000000},
								{0x0F007060,0x0010245F},
								{0x0F007064,0x00000010},
								{0x0F007068,0x00000000},
								{0x0F00706c,0x00000001},
								{0x0F007070,0x00007000},
								{0x0F007074,0x00000000},
								{0x0F007078,0x00000000},
								{0x0F00707C,0x00000000},
								{0x0F007080,0x00000000},
								{0x0F007084,0x00000000},
								{0x0F007088,0x01000001},
								{0x0F00708c,0x00000101},
								{0x0F007090,0x00000000},
								//# Enable BW improvement within memory controller
								{0x0F007094,0x00040000},
								{0x0F007098,0x00000000},
								{0x0F0070c8,0x00000104},
								//# Enable 2 ports within X-bar
								//# Enable start bit within memory controller
								{0x0F007018,0x01010000}
};

#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8  //index for 0x0F007000
static DDR_SET_NODE asT3LPB_DDRSetting100MHz[]= {//	# DPLL Clock Setting
								{0x0f000810,0x00002F95},
								{0x0f000820,0x03F1369B},
								{0x0f000840,0x0fff0000},
								{0x0f000860,0x00000000},
								{0x0f000880,0x000003DD},
								// Changed source for X-bar and MIPS clock to APLL
								{0x0f000840,0x0FFF0000},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
								{0x0F00a084,0x1Cffffff}, //dump from here in internal memory
								{0x0F00a080,0x1C000000},
								//Memcontroller Default values
								{0x0F007000,0x00010001},
								{0x0F007004,0x01010100},
								{0x0F007008,0x01000001},
								{0x0F00700c,0x00000000},
								{0x0F007010,0x01000000},
								{0x0F007014,0x01000100},
								{0x0F007018,0x01000000},
								{0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001
								{0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107
								{0x0F007024,0x00000007},
								{0x0F007028,0x01020200},
								{0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a
								{0x0F007030,0x06000000},
								{0x0F007034,0x00000004},
								{0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
								{0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018,
								{0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200,
								{0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
								{0x0F007048,0x03000305},
								{0x0F00704c,0x00000000},
								{0x0F007050,0x0100001c},
								{0x0F007054,0x00000000},
								{0x0F007058,0x00000000},
								{0x0F00705c,0x00000000},
								{0x0F007060,0x00082ED6},
								{0x0F007064,0x0000000A},
								{0x0F007068,0x00000000},
								{0x0F00706c,0x00000001},
								{0x0F007070,0x00005000},
								{0x0F007074,0x00000000},
								{0x0F007078,0x00000000},
								{0x0F00707C,0x00000000},
								{0x0F007080,0x00000000},
								{0x0F007084,0x00000000},
								{0x0F007088,0x01000001},
								{0x0F00708c,0x00000101},
								{0x0F007090,0x00000000},
								{0x0F007094,0x00010000},
								{0x0F007098,0x00000000},
								{0x0F0070C8,0x00000104},
								//# Enable 2 ports within X-bar
								{0x0F00A000,0x00000016},
								//# Enable start bit within memory controller
								{0x0F007018,0x01010000}
};

#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7  //index for 0x0F007000
static DDR_SET_NODE asT3LPB_DDRSetting80MHz[]= {//	# DPLL Clock Setting
								{0x0f000820,0x07F13FFF},
								{0x0f000810,0x00002F95},
								{0x0f000860,0x00000000},
								{0x0f000880,0x000003DD},
								{0x0f000840,0x0FFF1F00},
								{0x0F00a044,0x1fffffff},
								{0x0F00a040,0x1f000000},
								{0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
								{0x0F00a084,0x1Cffffff},// dump from here in internal memory
								{0x0F00a080,0x1C000000},
								{0x0F00A000,0x00000016},
								{0x0f007000,0x00010001},
								{0x0f007004,0x01000000},
								{0x0f007008,0x01000001},
								{0x0f00700c,0x00000000},
								{0x0f007010,0x01000000},
								{0x0f007014,0x01000100},
								{0x0f007018,0x01000000},
								{0x0f00701c,0x01020000},
								{0x0f007020,0x04020107},
								{0x0f007024,0x00000007},
								{0x0f007028,0x02020200},
								{0x0f00702c,0x0204040a},
								{0x0f007030,0x04000000},
								{0x0f007034,0x00000002},
								{0x0f007038,0x1d060200},
								{0x0f00703c,0x1c22221d},
								{0x0f007040,0x8A116600},
								{0x0f007044,0x222d0800},
								{0x0f007048,0x02690204},
								{0x0f00704c,0x00000000},
								{0x0f007050,0x0100001c},
								{0x0f007054,0x00000000},
								{0x0f007058,0x00000000},
								{0x0f00705c,0x00000000},
								{0x0f007060,0x000A15D6},
								{0x0f007064,0x0000000A},
								{0x0f007068,0x00000000},
								{0x0f00706c,0x00000001},
								{0x0f007070,0x00004000},
								{0x0f007074,0x00000000},
								{0x0f007078,0x00000000},
								{0x0f00707c,0x00000000},
								{0x0f007080,0x00000000},
								{0x0f007084,0x00000000},
								{0x0f007088,0x01000001},
								{0x0f00708c,0x00000101},
								{0x0f007090,0x00000000},
								{0x0f007094,0x00010000},
								{0x0f007098,0x00000000},
								{0x0F0070C8,0x00000104},
								{0x0F007018,0x01010000}
};


int ddr_init(MINI_ADAPTER *Adapter)
{
	PDDR_SETTING psDDRSetting=NULL;
	ULONG RegCount=0;
	UINT value = 0;
	UINT  uiResetValue = 0;
	UINT uiClockSetting = 0;
	int retval = STATUS_SUCCESS;

    switch (Adapter->chip_id)
	{
	case 0xbece3200:
	    switch (Adapter->DDRSetting)
	    {
	        case DDR_80_MHZ:
				psDDRSetting=asT3LP_DDRSetting80MHz;
			    RegCount=(sizeof(asT3LP_DDRSetting80MHz)/
			  	sizeof(DDR_SETTING));
			    break;
		    case DDR_100_MHZ:
				psDDRSetting=asT3LP_DDRSetting100MHz;
			    RegCount=(sizeof(asT3LP_DDRSetting100MHz)/
			  	sizeof(DDR_SETTING));
			    break;
		    case DDR_133_MHZ:
				psDDRSetting=asT3LP_DDRSetting133MHz;
			    RegCount=(sizeof(asT3LP_DDRSetting133MHz)/
		 	  		sizeof(DDR_SETTING));
				if(Adapter->bMipsConfig == MIPS_200_MHZ)
				{
					uiClockSetting = 0x03F13652;
				}
				else
				{
					uiClockSetting = 0x03F1365B;
				}
				break;
		    default:
			    return -EINVAL;
        }

		break;
	case T3LPB:
	case BCS220_2:
	case BCS220_2BC:
	case BCS250_BC:
	case BCS220_3 :
		/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive
		 * (please check current value and additionally set these bits)
		 */
		if( (Adapter->chip_id !=  BCS220_2) &&
			(Adapter->chip_id !=  BCS220_2BC) &&
			(Adapter->chip_id != BCS220_3) )
		{
				retval= rdmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
				if(retval < 0) {
					BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
					return retval;
				}
				uiResetValue |= 0x44;
				retval = wrmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
				if(retval < 0) {
					BCM_DEBUG_PRINT(Adapter,CMHOST, WRM, DBG_LVL_ALL, "%s:%d WRM failed\n", __FUNCTION__, __LINE__);
					return retval;
				}
		}
		switch(Adapter->DDRSetting)
		{



			case DDR_80_MHZ:
				psDDRSetting = asT3LPB_DDRSetting80MHz;
		        RegCount=(sizeof(asT3B_DDRSetting80MHz)/
		                  sizeof(DDR_SETTING));
			break;
            case DDR_100_MHZ:
				psDDRSetting=asT3LPB_DDRSetting100MHz;
		        RegCount=(sizeof(asT3B_DDRSetting100MHz)/
		                 sizeof(DDR_SETTING));
			break;
            case DDR_133_MHZ:
				psDDRSetting = asT3LPB_DDRSetting133MHz;
				RegCount=(sizeof(asT3B_DDRSetting133MHz)/
						 sizeof(DDR_SETTING));

				if(Adapter->bMipsConfig == MIPS_200_MHZ)
				{
					uiClockSetting = 0x03F13652;
				}
				else
				{
					uiClockSetting = 0x03F1365B;
				}
			break;

			case DDR_160_MHZ:
				psDDRSetting = asT3LPB_DDRSetting160MHz;
				RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(DDR_SETTING);

				if(Adapter->bMipsConfig == MIPS_200_MHZ)
				{
					uiClockSetting = 0x03F137D2;
				}
				else
				{
					uiClockSetting = 0x03F137DB;
				}
			}
			break;

	case 0xbece0110:
	case 0xbece0120:
	case 0xbece0121:
	case 0xbece0130:
	case 0xbece0300:
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting);
	    switch (Adapter->DDRSetting)
	    {
	        case DDR_80_MHZ:
				psDDRSetting = asT3_DDRSetting80MHz;
			    RegCount = (sizeof(asT3_DDRSetting80MHz)/
			  	sizeof(DDR_SETTING));
			    break;
		    case DDR_100_MHZ:
				psDDRSetting = asT3_DDRSetting100MHz;
			    RegCount = (sizeof(asT3_DDRSetting100MHz)/
			  	sizeof(DDR_SETTING));
			    break;
		    case DDR_133_MHZ:
				psDDRSetting = asT3_DDRSetting133MHz;
			    RegCount = (sizeof(asT3_DDRSetting133MHz)/
		 	  	sizeof(DDR_SETTING));
				break;
		    default:
			    return -EINVAL;
        }
	case 0xbece0310:
	{
	    switch (Adapter->DDRSetting)
	    {
	        case DDR_80_MHZ:
				psDDRSetting = asT3B_DDRSetting80MHz;
		        RegCount=(sizeof(asT3B_DDRSetting80MHz)/
		                  sizeof(DDR_SETTING));
		    break;
            case DDR_100_MHZ:
				psDDRSetting=asT3B_DDRSetting100MHz;
		        RegCount=(sizeof(asT3B_DDRSetting100MHz)/
		                 sizeof(DDR_SETTING));
			break;
            case DDR_133_MHZ:

				if(Adapter->bDPLLConfig == PLL_266_MHZ)//266Mhz PLL selected.
				{
					memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ,
									 sizeof(asDPLL_266MHZ));
					psDDRSetting = asT3B_DDRSetting133MHz;
					RegCount=(sizeof(asT3B_DDRSetting133MHz)/
									sizeof(DDR_SETTING));
				}
				else
				{
					psDDRSetting = asT3B_DDRSetting133MHz;
					RegCount=(sizeof(asT3B_DDRSetting133MHz)/
									sizeof(DDR_SETTING));
					if(Adapter->bMipsConfig == MIPS_200_MHZ)
					{
						uiClockSetting = 0x07F13652;
					}
					else
					{
						uiClockSetting = 0x07F1365B;
					}
				}
				break;
		    default:
			    return -EINVAL;
		}
		break;

	}
	default:
		return -EINVAL;
	}

	value=0;
	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Register Count is =%lu\n", RegCount);
	while(RegCount && !retval)
	{
		if(uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG)
		{
			value = uiClockSetting;
		}
		else
		{
			value = psDDRSetting->ulRegValue;
		}
		retval = wrmalt(Adapter, psDDRSetting->ulRegAddress, &value, sizeof(value));
		if(STATUS_SUCCESS != retval) {
			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
			break;
		}

		RegCount--;
		psDDRSetting++;
	}

	if(Adapter->chip_id >= 0xbece3300  )
	{

		mdelay(3);
		if( (Adapter->chip_id != BCS220_2)&&
			(Adapter->chip_id != BCS220_2BC)&&
			(Adapter->chip_id != BCS220_3))
		{
			/* drive MDDR to half in case of UMA-B:	*/
			uiResetValue = 0x01010001;
			retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x00040020;
			retval = wrmalt(Adapter, (UINT)0x0F007094, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x01020101;
			retval = wrmalt(Adapter, (UINT)0x0F00701c, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x01010000;
			retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
		}
		mdelay(3);

		/* DC/DC standby change...
		 * This is to be done only for Hybrid PMU mode.
		 * with the current h/w there is no way to detect this.
		 * and since we dont have internal PMU lets do it under UMA-B chip id.
	     * we will change this when we will have internal PMU.
	     */
		if(Adapter->PmuMode == HYBRID_MODE_7C)
		{
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x1322a8;
			retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x132296;
			retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
		}
		else if(Adapter->PmuMode == HYBRID_MODE_6 )
		{

			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x6003229a;
			retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
			uiResetValue = 0x1322a8;
			retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue));
			if(retval < 0) {
				BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
				return retval;
			}
		}

	}
	Adapter->bDDRInitDone = TRUE;
	return retval;
}

int download_ddr_settings(PMINI_ADAPTER Adapter)
{
	PDDR_SET_NODE psDDRSetting=NULL;
	ULONG RegCount=0;
	unsigned long ul_ddr_setting_load_addr = DDR_DUMP_INTERNAL_DEVICE_MEMORY;
	UINT  value = 0;
	int retval = STATUS_SUCCESS;
	BOOLEAN bOverrideSelfRefresh = FALSE;

	switch (Adapter->chip_id)
	{
	case 0xbece3200:
	    switch (Adapter->DDRSetting)
	    {
	        case DDR_80_MHZ:
				psDDRSetting = asT3LP_DDRSetting80MHz;
                RegCount = (sizeof(asT3LP_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
			break;
		    case DDR_100_MHZ:
				psDDRSetting = asT3LP_DDRSetting100MHz;
			    RegCount = (sizeof(asT3LP_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
			    break;
		     case DDR_133_MHZ:
				bOverrideSelfRefresh = TRUE;
				psDDRSetting = asT3LP_DDRSetting133MHz;
			    RegCount = (sizeof(asT3LP_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
		        psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
				break;
			default:
			    return -EINVAL;
        }
		break;

	case T3LPB:
	case BCS220_2:
	case BCS220_2BC:
	case BCS250_BC:
	case BCS220_3 :
	    switch (Adapter->DDRSetting)
	    {
	        case DDR_80_MHZ:
				psDDRSetting = asT3LPB_DDRSetting80MHz;
                RegCount=(sizeof(asT3LPB_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
			break;
		    case DDR_100_MHZ:
				psDDRSetting = asT3LPB_DDRSetting100MHz;
			    RegCount = (sizeof(asT3LPB_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
			    break;
		     case DDR_133_MHZ:
				bOverrideSelfRefresh = TRUE;
				psDDRSetting = asT3LPB_DDRSetting133MHz;
			    RegCount = (sizeof(asT3LPB_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
		        psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
				break;

			case DDR_160_MHZ:
					bOverrideSelfRefresh = TRUE;
					psDDRSetting = asT3LPB_DDRSetting160MHz;
					RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(DDR_SET_NODE);
					RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
					psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;

					break;
			default:
			    return -EINVAL;
        }
		break;
	case 0xbece0300:
	    switch (Adapter->DDRSetting)
	    {
	        case DDR_80_MHZ:
				psDDRSetting = asT3_DDRSetting80MHz;
                RegCount = (sizeof(asT3_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
			break;
		    case DDR_100_MHZ:
				psDDRSetting = asT3_DDRSetting100MHz;
			    RegCount = (sizeof(asT3_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
			    break;
		     case DDR_133_MHZ:
				psDDRSetting = asT3_DDRSetting133MHz;
			    RegCount = (sizeof(asT3_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
		        psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
				break;
			default:
			    return -EINVAL;
        }
	break;
	case 0xbece0310:
	    {
		    switch (Adapter->DDRSetting)
		    {
		        case DDR_80_MHZ:
					psDDRSetting = asT3B_DDRSetting80MHz;
                    RegCount = (sizeof(asT3B_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
                    RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                    psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
			        break;
		        case DDR_100_MHZ:
					psDDRSetting = asT3B_DDRSetting100MHz;
			        RegCount = (sizeof(asT3B_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
                    RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                    psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
			        break;
		        case DDR_133_MHZ:
					bOverrideSelfRefresh = TRUE;
					psDDRSetting = asT3B_DDRSetting133MHz;
			        RegCount = (sizeof(asT3B_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
	                RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
		            psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
					break;
		      }
		      break;
	     }
	default:
		return -EINVAL;
	}
	//total number of Register that has to be dumped
	value =RegCount  ;
	retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
	if(retval)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);

		return retval;
	}
	ul_ddr_setting_load_addr+=sizeof(ULONG);
	/*signature */
	value =(0x1d1e0dd0);
	retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
	if(retval)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
		return retval;
	}

	ul_ddr_setting_load_addr+=sizeof(ULONG);
	RegCount*=(sizeof(DDR_SETTING)/sizeof(ULONG));

	while(RegCount && !retval)
	{
		value = psDDRSetting->ulRegAddress ;
		retval = wrmalt( Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
		ul_ddr_setting_load_addr+=sizeof(ULONG);
		if(!retval)
		{
			if(bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018))
			{
				value = (psDDRSetting->ulRegValue |(1<<8));
				if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr,
						&value, sizeof(value))){
					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
					break;
				}
			}
			else
			{
				value =  psDDRSetting->ulRegValue;

				if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr ,
							&value, sizeof(value))){
					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
					break;
				}
			}
		}
		ul_ddr_setting_load_addr+=sizeof(ULONG);
		RegCount--;
		psDDRSetting++;
	}
	return retval;
}