rx.c 6.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245
  1. /*
  2. * This file is part of wl1271
  3. *
  4. * Copyright (C) 2009 Nokia Corporation
  5. *
  6. * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License
  10. * version 2 as published by the Free Software Foundation.
  11. *
  12. * This program is distributed in the hope that it will be useful, but
  13. * WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  15. * General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software
  19. * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20. * 02110-1301 USA
  21. *
  22. */
  23. #include <linux/gfp.h>
  24. #include "wl12xx.h"
  25. #include "acx.h"
  26. #include "reg.h"
  27. #include "rx.h"
  28. #include "io.h"
  29. static u8 wl1271_rx_get_mem_block(struct wl1271_fw_common_status *status,
  30. u32 drv_rx_counter)
  31. {
  32. return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
  33. RX_MEM_BLOCK_MASK;
  34. }
  35. static u32 wl1271_rx_get_buf_size(struct wl1271_fw_common_status *status,
  36. u32 drv_rx_counter)
  37. {
  38. return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
  39. RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
  40. }
  41. static void wl1271_rx_status(struct wl1271 *wl,
  42. struct wl1271_rx_descriptor *desc,
  43. struct ieee80211_rx_status *status,
  44. u8 beacon)
  45. {
  46. memset(status, 0, sizeof(struct ieee80211_rx_status));
  47. if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
  48. status->band = IEEE80211_BAND_2GHZ;
  49. else
  50. status->band = IEEE80211_BAND_5GHZ;
  51. status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band);
  52. #ifdef CONFIG_WL12XX_HT
  53. /* 11n support */
  54. if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
  55. status->flag |= RX_FLAG_HT;
  56. #endif
  57. status->signal = desc->rssi;
  58. /*
  59. * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we
  60. * need to divide by two for now, but TI has been discussing about
  61. * changing it. This needs to be rechecked.
  62. */
  63. wl->noise = desc->rssi - (desc->snr >> 1);
  64. status->freq = ieee80211_channel_to_frequency(desc->channel,
  65. status->band);
  66. if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
  67. u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK;
  68. status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED |
  69. RX_FLAG_DECRYPTED;
  70. if (unlikely(desc_err_code == WL1271_RX_DESC_MIC_FAIL)) {
  71. status->flag |= RX_FLAG_MMIC_ERROR;
  72. wl1271_warning("Michael MIC error");
  73. }
  74. }
  75. }
  76. static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
  77. {
  78. struct wl1271_rx_descriptor *desc;
  79. struct sk_buff *skb;
  80. struct ieee80211_hdr *hdr;
  81. u8 *buf;
  82. u8 beacon = 0;
  83. /*
  84. * In PLT mode we seem to get frames and mac80211 warns about them,
  85. * workaround this by not retrieving them at all.
  86. */
  87. if (unlikely(wl->state == WL1271_STATE_PLT))
  88. return -EINVAL;
  89. /* the data read starts with the descriptor */
  90. desc = (struct wl1271_rx_descriptor *) data;
  91. switch (desc->status & WL1271_RX_DESC_STATUS_MASK) {
  92. /* discard corrupted packets */
  93. case WL1271_RX_DESC_DRIVER_RX_Q_FAIL:
  94. case WL1271_RX_DESC_DECRYPT_FAIL:
  95. wl1271_warning("corrupted packet in RX with status: 0x%x",
  96. desc->status & WL1271_RX_DESC_STATUS_MASK);
  97. return -EINVAL;
  98. case WL1271_RX_DESC_SUCCESS:
  99. case WL1271_RX_DESC_MIC_FAIL:
  100. break;
  101. default:
  102. wl1271_error("invalid RX descriptor status: 0x%x",
  103. desc->status & WL1271_RX_DESC_STATUS_MASK);
  104. return -EINVAL;
  105. }
  106. skb = __dev_alloc_skb(length, GFP_KERNEL);
  107. if (!skb) {
  108. wl1271_error("Couldn't allocate RX frame");
  109. return -ENOMEM;
  110. }
  111. buf = skb_put(skb, length);
  112. memcpy(buf, data, length);
  113. /* now we pull the descriptor out of the buffer */
  114. skb_pull(skb, sizeof(*desc));
  115. hdr = (struct ieee80211_hdr *)skb->data;
  116. if (ieee80211_is_beacon(hdr->frame_control))
  117. beacon = 1;
  118. wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
  119. wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb,
  120. skb->len - desc->pad_len,
  121. beacon ? "beacon" : "");
  122. skb_trim(skb, skb->len - desc->pad_len);
  123. skb_queue_tail(&wl->deferred_rx_queue, skb);
  124. ieee80211_queue_work(wl->hw, &wl->netstack_work);
  125. return 0;
  126. }
  127. void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_common_status *status)
  128. {
  129. struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
  130. u32 buf_size;
  131. u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
  132. u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
  133. u32 rx_counter;
  134. u32 mem_block;
  135. u32 pkt_length;
  136. u32 pkt_offset;
  137. while (drv_rx_counter != fw_rx_counter) {
  138. buf_size = 0;
  139. rx_counter = drv_rx_counter;
  140. while (rx_counter != fw_rx_counter) {
  141. pkt_length = wl1271_rx_get_buf_size(status, rx_counter);
  142. if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
  143. break;
  144. buf_size += pkt_length;
  145. rx_counter++;
  146. rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
  147. }
  148. if (buf_size == 0) {
  149. wl1271_warning("received empty data");
  150. break;
  151. }
  152. if (wl->chip.id != CHIP_ID_1283_PG20) {
  153. /*
  154. * Choose the block we want to read
  155. * For aggregated packets, only the first memory block
  156. * should be retrieved. The FW takes care of the rest.
  157. */
  158. mem_block = wl1271_rx_get_mem_block(status,
  159. drv_rx_counter);
  160. wl->rx_mem_pool_addr.addr = (mem_block << 8) +
  161. le32_to_cpu(wl_mem_map->packet_memory_pool_start);
  162. wl->rx_mem_pool_addr.addr_extra =
  163. wl->rx_mem_pool_addr.addr + 4;
  164. wl1271_write(wl, WL1271_SLV_REG_DATA,
  165. &wl->rx_mem_pool_addr,
  166. sizeof(wl->rx_mem_pool_addr), false);
  167. }
  168. /* Read all available packets at once */
  169. wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
  170. buf_size, true);
  171. /* Split data into separate packets */
  172. pkt_offset = 0;
  173. while (pkt_offset < buf_size) {
  174. pkt_length = wl1271_rx_get_buf_size(status,
  175. drv_rx_counter);
  176. /*
  177. * the handle data call can only fail in memory-outage
  178. * conditions, in that case the received frame will just
  179. * be dropped.
  180. */
  181. wl1271_rx_handle_data(wl,
  182. wl->aggr_buf + pkt_offset,
  183. pkt_length);
  184. wl->rx_counter++;
  185. drv_rx_counter++;
  186. drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
  187. pkt_offset += pkt_length;
  188. }
  189. }
  190. /*
  191. * Write the driver's packet counter to the FW. This is only required
  192. * for older hardware revisions
  193. */
  194. if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
  195. wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
  196. }
  197. void wl1271_set_default_filters(struct wl1271 *wl)
  198. {
  199. if (wl->bss_type == BSS_TYPE_AP_BSS) {
  200. wl->rx_config = WL1271_DEFAULT_AP_RX_CONFIG;
  201. wl->rx_filter = WL1271_DEFAULT_AP_RX_FILTER;
  202. } else {
  203. wl->rx_config = WL1271_DEFAULT_STA_RX_CONFIG;
  204. wl->rx_filter = WL1271_DEFAULT_STA_RX_FILTER;
  205. }
  206. }