catacombapocalypse/ID_VW_AC.ASM

; Catacomb Apocalypse Source Code
; Copyright (C) 1993-2014 Flat Rock Software
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License along
; with this program; if not, write to the Free Software Foundation, Inc.,
; 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

;=================================
;
; CGA view manager routines
;
;=================================

;============================================================================
;
; All of these routines draw into a floating virtual screen segment in main
; memory.  bufferofs points to the origin of the drawing page in screenseg.
; The routines that write out words must take into account buffer wrapping
; and not write a word at 0xffff (which causes an exception on 386s).
;
; The direction flag should be clear
;
;============================================================================

DATASEG

plotpixels	db	0c0h,030h,0ch,03h
colorbyte	db	000000b,01010101b,10101010b,11111111b
colorword	dw	0,5555h,0aaaah,0ffffh

CODESEG

;============================================================================
;
; VW_Plot (int x,y,color)
;
;============================================================================


PROC	VW_Plot x:WORD, y:WORD, color:WORD
PUBLIC	VW_Plot
USES	SI,DI

	mov	es,[screenseg]

	mov	di,[bufferofs]
	mov	bx,[y]
	shl	bx,1
	add	di,[ylookup+bx]
	mov	bx,[x]
	mov	ax,bx
	shr	ax,1
	shr	ax,1
	add	di,ax				; di = byte on screen

	and	bx,3
	mov	ah,[plotpixels+bx]
	mov	bx,[color]
	mov	cl,[colorbyte+bx]
	and	cl,ah
	not	ah

	mov	al,[es:di]
	and	al,ah				; mask off other pixels
	or	al,cl
	stosb

	ret

ENDP


;============================================================================
;
; VW_Vlin (int yl,yh,x,color)
;
;============================================================================

PROC	VW_Vlin yl:WORD, yh:WORD, x:WORD, color:WORD
PUBLIC	VW_Vlin
USES	SI,DI

	mov	es,[screenseg]

	mov	di,[bufferofs]
	mov	bx,[yl]
	shl	bx,1
	add	di,[ylookup+bx]
	mov	bx,[x]
	mov	ax,bx
	shr	ax,1
	shr	ax,1
	add	di,ax				; di = byte on screen

	and	bx,3
	mov	ah,[plotpixels+bx]
	mov	bx,[color]
	mov	bl,[colorbyte+bx]
	and	bl,ah
	not	ah

	mov	cx,[yh]
	sub	cx,[yl]
	inc	cx					;number of pixels to plot

	mov	dx,[linewidth]

@@plot:
	mov	al,[es:di]
	and	al,ah				; mask off other pixels
	or	al,bl
	mov [es:di],al
	add	di,dx
	loop	@@plot

	ret

	ret

ENDP


;============================================================================


;===================
;
; VW_DrawTile8
;
; xcoord in bytes (8 pixels), ycoord in pixels
; All Tile8s are in one grseg, so an offset is calculated inside it
;
; DONE
;
;===================

PROC	VW_DrawTile8	xcoord:WORD, ycoord:WORD, tile:WORD
PUBLIC	VW_DrawTile8
USES	SI,DI

	mov	es,[screenseg]

	mov	di,[bufferofs]
	add	di,[xcoord]
	mov	bx,[ycoord]
	shl	bx,1
	add	di,[ylookup+bx]

	mov	bx,[linewidth]
	sub	bx,2

	mov	si,[tile]
	shl	si,1
	shl	si,1
	shl	si,1
	shl	si,1

	mov	ds,[grsegs+STARTTILE8*2] ; segment for all tile8s

;
; start drawing
;

REPT	7
	movsb						;no word moves because of segment wrapping
	movsb
	add	di,bx
ENDM
	movsb
	movsb

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

ENDP


;============================================================================
;
; VW_MaskBlock
;
; Draws a masked block shape to the screen.  bufferofs is NOT accounted for.
; The mask comes first, then the data.  Seperate unwound routines are used
; to speed drawing.
;
; Mask blocks will allways be an even width because of the way IGRAB works
;
; DONE
;
;============================================================================

DATASEG

UNWOUNDMASKS	=	18


maskroutines	dw	mask0,mask0,mask2E,mask2O,mask4E,mask4O
				dw	mask6E,mask6O,mask8E,mask8O,mask10E,mask10O
				dw	mask12E,mask12O,mask14E,mask14O,mask16E,mask16O
				dw	mask18E,mask18O


routinetouse	dw	?

CODESEG

PROC	VW_MaskBlock	segm:WORD, ofs:WORD, dest:WORD, wide:WORD, height:WORD, planesize:WORD
PUBLIC	VW_MaskBlock
USES	SI,DI

	mov	es,[screenseg]

	mov	di,[wide]
	mov	dx,[linewidth]
	sub	dx,di					;dx = delta to start of next line

	mov	bx,[planesize]			; si+bx = data location

	cmp	di,UNWOUNDMASKS
	jbe	@@unwoundroutine

;==============
;
; General purpose masked block drawing.  This could be optimised into
; four routines to use words, but few play loop sprites should be this big!
;
;==============

	mov	[ss:linedelta],dx
	mov	ds,[segm]
	mov	si,[ofs]
	mov	di,[dest]
	mov	dx,[height]				;scan lines to draw

@@lineloopgen:
	mov	cx,[wide]
@@byteloop:
	mov	al,[es:di]
	and	al,[si]
	or	al,[bx+si]
	inc	si
	stosb
	loop	@@byteloop

	add	di,[ss:linedelta]
	dec	dx
	jnz	@@lineloopgen

mask0:
	mov	ax,ss
	mov	ds,ax
	ret							;width of 0 = no drawing


;=================
;
; use the unwound routines
;
;=================

@@unwoundroutine:
	shr	di,1					;we only have even width unwound routines
	mov	cx,[dest]
	shr	cx,1
	rcl	di,1					;shift a 1 in if destination is odd
	shl	di,1
	mov	ax,[maskroutines+di]	;call the right routine

	mov	ds,[segm]
	mov	si,[ofs]
	mov	di,[dest]
	mov	cx,[height]				;scan lines to draw

	jmp ax						;draw it

;=================
;
; Horizontally unwound routines to draw certain masked blocks faster
;
;=================

MACRO	MASKBYTE
	mov	al,[es:di]
	and	al,[si]
	or	al,[bx+si]
	inc	si
	stosb
ENDM

MACRO	MASKWORD
	mov	ax,[es:di]
	and	ax,[si]
	or	ax,[bx+si]
	inc	si
	inc	si
	stosw
ENDM

MACRO	SPRITELOOP	addr
	add	di,dx
	loop	addr
	mov	ax,ss
	mov	ds,ax
	ret
ENDM


EVEN
mask2E:
	MASKWORD
	SPRITELOOP	mask2E

EVEN
mask2O:
	MASKBYTE
	MASKBYTE
	SPRITELOOP	mask2O

EVEN
mask4E:
	MASKWORD
	MASKWORD
	SPRITELOOP	mask4E

EVEN
mask4O:
	MASKBYTE
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask4O

EVEN
mask6E:
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask6E

EVEN
mask6O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask6O

EVEN
mask8E:
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask8E

EVEN
mask8O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask8O

EVEN
mask10E:
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask10E

EVEN
mask10O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask10O

EVEN
mask12E:
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask12E

EVEN
mask12O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask12O

EVEN
mask14E:
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask14E

EVEN
mask14O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask14O

EVEN
mask16E:
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask16E

EVEN
mask16O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask16O

EVEN
mask18E:
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	SPRITELOOP	mask18E

EVEN
mask18O:
	MASKBYTE
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKWORD
	MASKBYTE
	SPRITELOOP	mask18O


ENDP


;============================================================================
;
; VW_ScreenToScreen
;
; Basic block copy routine.  Copies one block of screen memory to another,
; bufferofs is NOT accounted for.
;
; DONE
;
;============================================================================

PROC	VW_ScreenToScreen	source:WORD, dest:WORD, wide:WORD, height:WORD
PUBLIC	VW_ScreenToScreen
USES	SI,DI

	mov	bx,[linewidth]
	sub	bx,[wide]

	mov	ax,[screenseg]
	mov	es,ax
	mov	ds,ax

	mov	si,[source]
	mov	di,[dest]				;start at same place in all planes
	mov	dx,[height]				;scan lines to draw
	mov	ax,[wide]
;
; if the width, source, and dest are all even, use word moves
; This is allways the case in the CGA refresh
;
	test	ax,1
	jnz	@@bytelineloop
	test	si,1
	jnz	@@bytelineloop
	test	di,1
	jnz	@@bytelineloop

	shr	ax,1
@@wordlineloop:
	mov	cx,ax
	rep	movsw
	add	si,bx
	add	di,bx

	dec	dx
	jnz	@@wordlineloop

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

@@bytelineloop:
	mov	cx,ax
	rep	movsb
	add	si,bx
	add	di,bx

	dec	dx
	jnz	@@bytelineloop

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

ENDP


;============================================================================
;
; VW_MemToScreen
;
; Basic block drawing routine. Takes a block shape at segment pointer source
; of width by height data, and draws it to dest in the virtual screen,
; based on linewidth.  bufferofs is NOT accounted for.
; There are four drawing routines to provide the best optimized code while
; accounting for odd segment wrappings due to the floating screens.
;
; DONE
;
;============================================================================

DATASEG

memtoscreentable	dw	eventoeven,eventoodd,oddtoeven,oddtoodd

CODESEG


PROC	VW_MemToScreen	source:WORD, dest:WORD, wide:WORD, height:WORD
PUBLIC	VW_MemToScreen
USES	SI,DI

	mov	es,[screenseg]

	mov	bx,[linewidth]
	sub	bx,[wide]

	mov	ds,[source]

	xor	si,si					;block is segment aligned

	xor	di,di
	shr	[wide],1				;change wide to words, and see if carry is set
	rcl	di,1					;1 if wide is odd
	mov	ax,[dest]
	shr	ax,1
	rcl	di,1					;shift a 1 in if destination is odd
	shl	di,1					;to index into a word width table
	mov	dx,[height]				;scan lines to draw
	mov	ax,[wide]
	jmp	[ss:memtoscreentable+di]	;call the right routine

;==============
;
; Copy an even width block to an even destination address
;
;==============

eventoeven:
	mov	di,[dest]				;start at same place in all planes
EVEN
@@lineloopEE:
	mov	cx,ax
	rep	movsw
	add	di,bx
	dec	dx
	jnz	@@lineloopEE

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

;==============
;
; Copy an odd width block to an even video address
;
;==============

oddtoeven:
	mov	di,[dest]				;start at same place in all planes
EVEN
@@lineloopOE:
	mov	cx,ax
	rep	movsw
	movsb						;copy the last byte
	add	di,bx
	dec	dx
	jnz	@@lineloopOE

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

;==============
;
; Copy an even width block to an odd video address
;
;==============

eventoodd:
	mov	di,[dest]				;start at same place in all planes
	dec	ax						;one word has to be handled seperately
EVEN
@@lineloopEO:
	movsb
	mov	cx,ax
	rep	movsw
	movsb
	add	di,bx
	dec	dx
	jnz	@@lineloopEO

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

;==============
;
; Copy an odd width block to an odd video address
;
;==============

oddtoodd:
	mov	di,[dest]				;start at same place in all planes
EVEN
@@lineloopOO:
	movsb
	mov	cx,ax
	rep	movsw
	add	di,bx
	dec	dx
	jnz	@@lineloopOO

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment
	ret


ENDP

;===========================================================================
;
; VW_ScreenToMem
;
; Copies a block of video memory to main memory, in order from planes 0-3.
; This could be optimized along the lines of VW_MemToScreen to take advantage
; of word copies, but this is an infrequently called routine.
;
; DONE
;
;===========================================================================

PROC	VW_ScreenToMem	source:WORD, dest:WORD, wide:WORD, height:WORD
PUBLIC	VW_ScreenToMem
USES	SI,DI

	mov	es,[dest]

	mov	bx,[linewidth]
	sub	bx,[wide]

	mov	ds,[screenseg]

	xor	di,di

	mov	si,[source]
	mov	dx,[height]				;scan lines to draw

@@lineloop:
	mov	cx,[wide]
	rep	movsb

	add	si,bx

	dec	dx
	jnz	@@lineloop

	mov	ax,ss
	mov	ds,ax					;restore turbo's data segment

	ret

ENDP


;===========================================================================
;
;                    MISC CGA ROUTINES
;
;===========================================================================

;==============
;
; VW_SetScreen
;
; DONE
;
;==============

PROC	VW_SetScreen  crtc:WORD
PUBLIC	VW_SetScreen

;
; for some reason, my XT's EGA card doesn't like word outs to the CRTC
; index...
;
	cli

	mov	cx,[crtc]
	mov	dx,CRTC_INDEX
	mov	al,0ch		;start address high register
	out	dx,al
	inc	dx
	mov	al,ch
	out	dx,al
	dec	dx
	mov	al,0dh		;start address low register
	out	dx,al
	mov	al,cl
	inc	dx
	out	dx,al

	sti

	ret

ENDP


if NUMFONT+NUMFONTM

;===========================================================================
;
; GENERAL FONT DRAWING ROUTINES
;
;===========================================================================

DATASEG

px	dw	?					; proportional character drawing coordinates
py	dw	?
pdrawmode	db	11000b		; 8 = OR, 24 = XOR, put in GC_DATAROTATE
fontcolor	db	15		;0-15 mapmask value

PUBLIC	px,py,pdrawmode,fontcolor

;
; offsets in font structure
;
pcharheight	=	0		;lines high
charloc		=	2		;pointers to every character
charwidth	=	514		;every character's width in pixels


propchar	dw	?			; the character number to shift
stringptr	dw	?,?

fontcolormask	dw	?			; font color expands into this

BUFFWIDTH	=	100
BUFFHEIGHT	=   32			; must be twice as high as font for masked fonts

databuffer	db	BUFFWIDTH*BUFFHEIGHT dup (?)

bufferwidth	dw	?						; bytes with valid info / line
bufferheight dw	?						; number of lines currently used

bufferbyte	dw	?
bufferbit	dw	?
PUBLIC	bufferwidth,bufferheight,bufferbyte,bufferbit

screenspot	dw	?						; where the buffer is going

bufferextra	dw	?						; add at end of a line copy
screenextra	dw	?

CODESEG

;======================
;
; Macros to table shift a byte of font
;
;======================

MACRO	SHIFTNOXOR
	mov	al,[es:bx]		; source
	xor	ah,ah
	shl	ax,1
	mov	si,ax
	mov	ax,[bp+si]		; table shift into two bytes
	or	[di],al			; or with first byte
	inc	di
	mov	[di],ah			; replace next byte
	inc	bx				; next source byte
ENDM

MACRO	SHIFTWITHXOR
	mov	al,[es:bx]		; source
	xor	ah,ah
	shl	ax,1
	mov	si,ax
	mov	ax,[bp+si]		; table shift into two bytes
	not	ax
	and	[di],al			; and with first byte
	inc	di
	mov	[di],ah			; replace next byte
	inc	bx				; next source byte
ENDM


;=======================
;
; VWL_XORBuffer
;
; Pass buffer start in SI (somewhere in databuffer)
; Draws the buffer to the screen buffer
;
;========================

PROC	VWL_XORBuffer	NEAR
USES	BP
	mov	bl,[fontcolor]
	xor	bh,bh
	shl	bx,1
	mov	ax,[colorword+bx]
	mov	[fontcolormask],ax

	mov	es,[screenseg]
	mov	di,[screenspot]

	mov	bx,[bufferwidth]		;calculate offsets for end of each line
	mov	[bufferwidth],bx

	or	bx,bx
	jnz	@@isthere
	ret							;nothing to draw

@@isthere:
	test	bx,1
	jnz	@@odd
	jmp	@@even
;
; clear the last byte so word draws can be used
;
@@odd:
	mov	al,0
line	=	0
REPT	BUFFHEIGHT
	mov	[BYTE databuffer+BUFFWIDTH*line+bx],al
line	=	line+1
ENDM

	inc	bx
@@even:
	mov	ax,[linewidth]
	sub	ax,bx
	mov	[screenextra],ax
	mov	ax,BUFFWIDTH
	sub	ax,bx
	mov	[bufferextra],ax
	mov	dx,bx
	shr	dx,1					;word to copy

	mov	bx,[bufferheight]		;lines to copy
	mov	bp,[fontcolormask]
@@lineloop:
	mov	cx,dx
@@wordloop:
	lodsw						;get a word from the buffer
	and	ax,bp
	xor	[es:di],ax				;draw it
	add	di,2
	loop	@@wordloop

	add	si,[bufferextra]
	add	di,[screenextra]

	dec	bx
	jnz	@@lineloop

	ret
ENDP


DATASEG

;============================================================================
;
; NON MASKED FONT DRAWING ROUTINES
;
;============================================================================

if numfont

DATASEG

shiftdrawtable	dw      0,shift1wide,shift2wide,shift3wide,shift4wide
				dw		shift5wide,shift6wide

CODESEG

;==================
;
; ShiftPropChar
;
; Call with BX = character number (0-255)
; Draws one character to the buffer at bufferbyte/bufferbit, and adjusts
; them to the new position
;
;==================

PROC	ShiftPropChar	NEAR

	mov	es,[grsegs+STARTFONT*2]	;segment of font to use

;
; find character location, width, and height
;
	mov	si,[es:charwidth+bx]
	and	si,0ffh					;SI hold width in pixels
	shl	bx,1
	mov	bx,[es:charloc+bx]		;BX holds pointer to character data

;
; look up which shift table to use, based on bufferbit
;
	mov	di,[bufferbit]
	shl	di,1
	mov	bp,[shifttabletable+di]	;BP holds pointer to shift table

	mov	di,OFFSET databuffer
	add	di,[bufferbyte]			;DI holds pointer to buffer

	mov	cx,[bufferbit]
	add	cx,si					;add twice because pixel == two bits
	add	cx,si					;new bit position
	mov	ax,cx
	and	ax,7
	mov	[bufferbit],ax			;new bit position
	mov	ax,cx
	shr	ax,1
	shr	ax,1
	shr	ax,1
	add	[bufferbyte],ax			;new byte position

	add	si,3
	shr	si,1
	shr	si,1					;bytes the character is wide
	shl	si,1                    ;*2 to look up in shiftdrawtable

	mov	cx,[es:pcharheight]
	mov	dx,BUFFWIDTH
	jmp	[ss:shiftdrawtable+si]	;procedure to draw this width

;
; one byte character
;
shift1wide:
	dec	dx
EVEN
@@loop1:
	SHIFTNOXOR
	add	di,dx			; next line in buffer

	loop	@@loop1

	ret

;
; two byte character
;
shift2wide:
	dec	dx
	dec	dx
EVEN
@@loop2:
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer

	loop	@@loop2

	ret

;
; three byte character
;
shift3wide:
	sub	dx,3
EVEN
@@loop3:
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer

	loop	@@loop3

	ret


;
; four byte character
;
shift4wide:
	sub	dx,4
EVEN
@@loop4:
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer

	loop	@@loop4

	ret


;
; five byte character
;
shift5wide:
	sub	dx,5
EVEN
@@loop5:
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer

	loop	@@loop5

	ret

;
; six byte character
;
shift6wide:
	sub	dx,6
EVEN
@@loop6:
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer

	loop	@@loop6

	ret



ENDP

;============================================================================

;==================
;
; VW_DrawPropString
;
; Draws a C string of characters at px/py and advances px
;
;==================

CODESEG

PROC	VW_DrawPropString	string:DWORD
PUBLIC	VW_DrawPropString
USES	SI,DI

;
; proportional spaceing, which clears the buffer ahead of it, so only
; clear the first collumn
;
	mov	al,0
line	=	0
REPT	BUFFHEIGHT
	mov	[BYTE databuffer+BUFFWIDTH*line],al
line	=	line+1
ENDM

;
; shift the characters into the buffer
;
@@shiftchars:
	mov	ax,[px]
	and	ax,3
	shl	ax,1			;one pixel == two bits
	mov	[bufferbit],ax
	mov	[bufferbyte],0

	mov	ax,[WORD string]
	mov	[stringptr],ax
	mov	ax,[WORD string+2]
	mov	[stringptr+2],ax

@@shiftone:
	mov	es,[stringptr+2]
	mov	bx,[stringptr]
	inc	[stringptr]
	mov	bx,[es:bx]
	xor	bh,bh
	or	bl,bl
	jz	@@allshifted
	call	ShiftPropChar
	jmp	@@shiftone

@@allshifted:
;
; calculate position to draw buffer on screen
;
	mov	bx,[py]
	shl	bx,1
	mov	di,[ylookup+bx]
	add	di,[bufferofs]
	add	di,[panadjust]

	mov	ax,[px]
	shr	ax,1
	shr	ax,1		;x location in bytes
	add	di,ax
	mov	[screenspot],di

;
; advance px
;
	mov	ax,[bufferbyte]
	shl	ax,1
	shl	ax,1
	mov	bx,[bufferbit]
	shr	bx,1			;two bits == one pixel
	or	ax,bx
	add	[px],ax

;
; draw it
;
	mov	ax,[bufferbyte]
	test	[bufferbit],7
	jz	@@go
	inc	ax				;so the partial byte also gets drawn
@@go:
	mov	[bufferwidth],ax
	mov	es,[grsegs+STARTFONT*2]
	mov	ax,[es:pcharheight]
	mov	[bufferheight],ax

	mov	si,OFFSET databuffer
	call	VWL_XORBuffer

	ret

ENDP

endif	;numfont

;============================================================================
;
; MASKED FONT DRAWING ROUTINES
;
;============================================================================

if	numfontm

DATASEG

mshiftdrawtable	dw      0,mshift1wide,mshift2wide,mshift3wide


CODESEG

;==================
;
; ShiftMPropChar
;
; Call with BX = character number (0-255)
; Draws one character to the buffer at bufferbyte/bufferbit, and adjusts
; them to the new position
;
;==================

PROC	ShiftMPropChar	NEAR

	mov	es,[grsegs+STARTFONTM*2]	;segment of font to use

;
; find character location, width, and height
;
	mov	si,[es:charwidth+bx]
	and	si,0ffh					;SI hold width in pixels
	shl	bx,1
	mov	bx,[es:charloc+bx]		;BX holds pointer to character data

;
; look up which shift table to use, based on bufferbit
;
	mov	di,[bufferbit]
	shl	di,1
	mov	bp,[shifttabletable+di]	;BP holds pointer to shift table

	mov	di,OFFSET databuffer
	add	di,[bufferbyte]			;DI holds pointer to buffer

;
; advance position by character width
;
	mov	cx,[bufferbit]
	add	cx,si					;new bit position
	mov	ax,cx
	and	ax,7
	mov	[bufferbit],ax			;new bit position
	mov	ax,cx
	shr	ax,1
	shr	ax,1
	shr	ax,1
	add	[bufferbyte],ax			;new byte position

	add	si,7
	shr	si,1
	shr	si,1
	shr	si,1					;bytes the character is wide
	shl	si,1                    ;*2 to look up in shiftdrawtable

	mov	cx,[es:pcharheight]
	mov	dx,BUFFWIDTH
	jmp	[ss:mshiftdrawtable+si]	;procedure to draw this width

;
; one byte character
;
mshift1wide:
	dec	dx

EVEN
@@loop1m:
	SHIFTWITHXOR
	add	di,dx			; next line in buffer

	loop	@@loop1m

	mov	cx,[es:pcharheight]

EVEN
@@loop1:
	SHIFTNOXOR
	add	di,dx			; next line in buffer
	loop	@@loop1

	ret

;
; two byte character
;
mshift2wide:
	dec	dx
	dec	dx
EVEN
@@loop2m:
	SHIFTWITHXOR
	SHIFTWITHXOR
	add	di,dx			; next line in buffer

	loop	@@loop2m

	mov	cx,[es:pcharheight]

EVEN
@@loop2:
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer
	loop	@@loop2

	ret

;
; three byte character
;
mshift3wide:
	sub	dx,3
EVEN
@@loop3m:
	SHIFTWITHXOR
	SHIFTWITHXOR
	SHIFTWITHXOR
	add	di,dx			; next line in buffer

	loop	@@loop3m

	mov	cx,[es:pcharheight]

EVEN
@@loop3:
	SHIFTNOXOR
	SHIFTNOXOR
	SHIFTNOXOR
	add	di,dx			; next line in buffer
	loop	@@loop3

	ret


ENDP

;============================================================================

;==================
;
; VW_DrawMPropString
;
; Draws a C string of characters at px/py and advances px
;
;==================



PROC	VW_DrawMPropString	string:DWORD
PUBLIC	VW_DrawMPropString
USES	SI,DI

;
; clear out the first byte of the buffer, the rest will automatically be
; cleared as characters are drawn into it
;
	mov	es,[grsegs+STARTFONTM*2]
	mov	dx,[es:pcharheight]
	mov	di,OFFSET databuffer
	mov	ax,ds
	mov	es,ax
	mov	bx,BUFFWIDTH-1

	mov	cx,dx
	mov	al,0ffh
@@maskfill:
	stosb				; fill the mask part with $ff
	add	di,bx
	loop	@@maskfill

	mov	cx,dx
	xor	al,al
@@datafill:
	stosb				; fill the data part with $0
	add	di,bx
	loop	@@datafill

;
; shift the characters into the buffer
;
	mov	ax,[px]
	and	ax,7
	mov	[bufferbit],ax
	mov	[bufferbyte],0

	mov	ax,[WORD string]
	mov	[stringptr],ax
	mov	ax,[WORD string+2]
	mov	[stringptr+2],ax

@@shiftone:
	mov	es,[stringptr+2]
	mov	bx,[stringptr]
	inc	[stringptr]
	mov	bx,[es:bx]
	xor	bh,bh
	or	bl,bl
	jz	@@allshifted
	call	ShiftMPropChar
	jmp	@@shiftone

@@allshifted:
;
; calculate position to draw buffer on screen
;
	mov	bx,[py]
	shl	bx,1
	mov	di,[ylookup+bx]
	add	di,[bufferofs]

	mov	ax,[px]
	shr	ax,1
	shr	ax,1
	shr	ax,1		;x location in bytes
	add	di,ax
	mov	[screenspot],di

;
; advance px
;
	mov	ax,[bufferbyte]
	shl	ax,1
	shl	ax,1
	shl	ax,1
	or	ax,[bufferbit]
	add	[px],ax

;
; draw it
;
	mov	ax,[bufferbyte]
	test	[bufferbit],7
	jz	@@go
	inc	ax				;so the partial byte also gets drawn
@@go:
	mov	[bufferwidth],ax
	mov	es,[grsegs+STARTFONTM*2]
	mov	ax,[es:pcharheight]
	mov	[bufferheight],ax

	mov	si,OFFSET databuffer
	call	BufferToScreen		; cut out mask
								; or in data
	call	BufferToScreen		; SI is still in the right position in buffer

	ret

ENDP

endif		; if numfontm

endif		; if fonts