mxs_timer.c 8.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297
  1. /*
  2. * Copyright (C) 2000-2001 Deep Blue Solutions
  3. * Copyright (C) 2002 Shane Nay (shane@minirl.com)
  4. * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
  5. * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  6. * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License
  10. * as published by the Free Software Foundation; either version 2
  11. * of the License, or (at your option) any later version.
  12. * This program is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15. * GNU General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software
  19. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  20. * MA 02110-1301, USA.
  21. */
  22. #include <linux/err.h>
  23. #include <linux/interrupt.h>
  24. #include <linux/irq.h>
  25. #include <linux/clockchips.h>
  26. #include <linux/clk.h>
  27. #include <linux/of.h>
  28. #include <linux/of_address.h>
  29. #include <linux/of_irq.h>
  30. #include <linux/stmp_device.h>
  31. #include <linux/sched_clock.h>
  32. /*
  33. * There are 2 versions of the timrot on Freescale MXS-based SoCs.
  34. * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
  35. * extends the counter to 32 bits.
  36. *
  37. * The implementation uses two timers, one for clock_event and
  38. * another for clocksource. MX28 uses timrot 0 and 1, while MX23
  39. * uses 0 and 2.
  40. */
  41. #define MX23_TIMROT_VERSION_OFFSET 0x0a0
  42. #define MX28_TIMROT_VERSION_OFFSET 0x120
  43. #define BP_TIMROT_MAJOR_VERSION 24
  44. #define BV_TIMROT_VERSION_1 0x01
  45. #define BV_TIMROT_VERSION_2 0x02
  46. #define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1)
  47. /*
  48. * There are 4 registers for each timrotv2 instance, and 2 registers
  49. * for each timrotv1. So address step 0x40 in macros below strides
  50. * one instance of timrotv2 while two instances of timrotv1.
  51. *
  52. * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
  53. * on MX28 while timrot2 on MX23.
  54. */
  55. /* common between v1 and v2 */
  56. #define HW_TIMROT_ROTCTRL 0x00
  57. #define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40)
  58. /* v1 only */
  59. #define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40)
  60. /* v2 only */
  61. #define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40)
  62. #define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40)
  63. #define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6)
  64. #define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7)
  65. #define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
  66. #define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
  67. #define BP_TIMROT_TIMCTRLn_SELECT 0
  68. #define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
  69. #define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
  70. #define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf
  71. static struct clock_event_device mxs_clockevent_device;
  72. static void __iomem *mxs_timrot_base;
  73. static u32 timrot_major_version;
  74. static inline void timrot_irq_disable(void)
  75. {
  76. __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
  77. HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
  78. }
  79. static inline void timrot_irq_enable(void)
  80. {
  81. __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
  82. HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
  83. }
  84. static void timrot_irq_acknowledge(void)
  85. {
  86. __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
  87. HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
  88. }
  89. static u64 timrotv1_get_cycles(struct clocksource *cs)
  90. {
  91. return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
  92. & 0xffff0000) >> 16);
  93. }
  94. static int timrotv1_set_next_event(unsigned long evt,
  95. struct clock_event_device *dev)
  96. {
  97. /* timrot decrements the count */
  98. __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
  99. return 0;
  100. }
  101. static int timrotv2_set_next_event(unsigned long evt,
  102. struct clock_event_device *dev)
  103. {
  104. /* timrot decrements the count */
  105. __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
  106. return 0;
  107. }
  108. static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
  109. {
  110. struct clock_event_device *evt = dev_id;
  111. timrot_irq_acknowledge();
  112. evt->event_handler(evt);
  113. return IRQ_HANDLED;
  114. }
  115. static struct irqaction mxs_timer_irq = {
  116. .name = "MXS Timer Tick",
  117. .dev_id = &mxs_clockevent_device,
  118. .flags = IRQF_TIMER | IRQF_IRQPOLL,
  119. .handler = mxs_timer_interrupt,
  120. };
  121. static void mxs_irq_clear(char *state)
  122. {
  123. /* Disable interrupt in timer module */
  124. timrot_irq_disable();
  125. /* Set event time into the furthest future */
  126. if (timrot_is_v1())
  127. __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
  128. else
  129. __raw_writel(0xffffffff,
  130. mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
  131. /* Clear pending interrupt */
  132. timrot_irq_acknowledge();
  133. #ifdef DEBUG
  134. pr_info("%s: changing mode to %s\n", __func__, state)
  135. #endif /* DEBUG */
  136. }
  137. static int mxs_shutdown(struct clock_event_device *evt)
  138. {
  139. mxs_irq_clear("shutdown");
  140. return 0;
  141. }
  142. static int mxs_set_oneshot(struct clock_event_device *evt)
  143. {
  144. if (clockevent_state_oneshot(evt))
  145. mxs_irq_clear("oneshot");
  146. timrot_irq_enable();
  147. return 0;
  148. }
  149. static struct clock_event_device mxs_clockevent_device = {
  150. .name = "mxs_timrot",
  151. .features = CLOCK_EVT_FEAT_ONESHOT,
  152. .set_state_shutdown = mxs_shutdown,
  153. .set_state_oneshot = mxs_set_oneshot,
  154. .tick_resume = mxs_shutdown,
  155. .set_next_event = timrotv2_set_next_event,
  156. .rating = 200,
  157. };
  158. static int __init mxs_clockevent_init(struct clk *timer_clk)
  159. {
  160. if (timrot_is_v1())
  161. mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
  162. mxs_clockevent_device.cpumask = cpumask_of(0);
  163. clockevents_config_and_register(&mxs_clockevent_device,
  164. clk_get_rate(timer_clk),
  165. timrot_is_v1() ? 0xf : 0x2,
  166. timrot_is_v1() ? 0xfffe : 0xfffffffe);
  167. return 0;
  168. }
  169. static struct clocksource clocksource_mxs = {
  170. .name = "mxs_timer",
  171. .rating = 200,
  172. .read = timrotv1_get_cycles,
  173. .mask = CLOCKSOURCE_MASK(16),
  174. .flags = CLOCK_SOURCE_IS_CONTINUOUS,
  175. };
  176. static u64 notrace mxs_read_sched_clock_v2(void)
  177. {
  178. return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
  179. }
  180. static int __init mxs_clocksource_init(struct clk *timer_clk)
  181. {
  182. unsigned int c = clk_get_rate(timer_clk);
  183. if (timrot_is_v1())
  184. clocksource_register_hz(&clocksource_mxs, c);
  185. else {
  186. clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
  187. "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
  188. sched_clock_register(mxs_read_sched_clock_v2, 32, c);
  189. }
  190. return 0;
  191. }
  192. static int __init mxs_timer_init(struct device_node *np)
  193. {
  194. struct clk *timer_clk;
  195. int irq, ret;
  196. mxs_timrot_base = of_iomap(np, 0);
  197. WARN_ON(!mxs_timrot_base);
  198. timer_clk = of_clk_get(np, 0);
  199. if (IS_ERR(timer_clk)) {
  200. pr_err("%s: failed to get clk\n", __func__);
  201. return PTR_ERR(timer_clk);
  202. }
  203. ret = clk_prepare_enable(timer_clk);
  204. if (ret)
  205. return ret;
  206. /*
  207. * Initialize timers to a known state
  208. */
  209. stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
  210. /* get timrot version */
  211. timrot_major_version = __raw_readl(mxs_timrot_base +
  212. (of_device_is_compatible(np, "fsl,imx23-timrot") ?
  213. MX23_TIMROT_VERSION_OFFSET :
  214. MX28_TIMROT_VERSION_OFFSET));
  215. timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
  216. /* one for clock_event */
  217. __raw_writel((timrot_is_v1() ?
  218. BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
  219. BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
  220. BM_TIMROT_TIMCTRLn_UPDATE |
  221. BM_TIMROT_TIMCTRLn_IRQ_EN,
  222. mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
  223. /* another for clocksource */
  224. __raw_writel((timrot_is_v1() ?
  225. BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
  226. BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
  227. BM_TIMROT_TIMCTRLn_RELOAD,
  228. mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
  229. /* set clocksource timer fixed count to the maximum */
  230. if (timrot_is_v1())
  231. __raw_writel(0xffff,
  232. mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
  233. else
  234. __raw_writel(0xffffffff,
  235. mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
  236. /* init and register the timer to the framework */
  237. ret = mxs_clocksource_init(timer_clk);
  238. if (ret)
  239. return ret;
  240. ret = mxs_clockevent_init(timer_clk);
  241. if (ret)
  242. return ret;
  243. /* Make irqs happen */
  244. irq = irq_of_parse_and_map(np, 0);
  245. if (irq <= 0)
  246. return -EINVAL;
  247. return setup_irq(irq, &mxs_timer_irq);
  248. }
  249. CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);