123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276 |
- /*
- * Regulators driver for Maxim max8649
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- * Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/err.h>
- #include <linux/i2c.h>
- #include <linux/platform_device.h>
- #include <linux/regulator/driver.h>
- #include <linux/slab.h>
- #include <linux/regulator/max8649.h>
- #include <linux/regmap.h>
- #define MAX8649_DCDC_VMIN 750000 /* uV */
- #define MAX8649_DCDC_VMAX 1380000 /* uV */
- #define MAX8649_DCDC_STEP 10000 /* uV */
- #define MAX8649_VOL_MASK 0x3f
- /* Registers */
- #define MAX8649_MODE0 0x00
- #define MAX8649_MODE1 0x01
- #define MAX8649_MODE2 0x02
- #define MAX8649_MODE3 0x03
- #define MAX8649_CONTROL 0x04
- #define MAX8649_SYNC 0x05
- #define MAX8649_RAMP 0x06
- #define MAX8649_CHIP_ID1 0x08
- #define MAX8649_CHIP_ID2 0x09
- /* Bits */
- #define MAX8649_EN_PD (1 << 7)
- #define MAX8649_VID0_PD (1 << 6)
- #define MAX8649_VID1_PD (1 << 5)
- #define MAX8649_VID_MASK (3 << 5)
- #define MAX8649_FORCE_PWM (1 << 7)
- #define MAX8649_SYNC_EXTCLK (1 << 6)
- #define MAX8649_EXT_MASK (3 << 6)
- #define MAX8649_RAMP_MASK (7 << 5)
- #define MAX8649_RAMP_DOWN (1 << 1)
- struct max8649_regulator_info {
- struct device *dev;
- struct regmap *regmap;
- unsigned mode:2; /* bit[1:0] = VID1, VID0 */
- unsigned extclk_freq:2;
- unsigned extclk:1;
- unsigned ramp_timing:3;
- unsigned ramp_down:1;
- };
- static int max8649_enable_time(struct regulator_dev *rdev)
- {
- struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
- int voltage, rate, ret;
- unsigned int val;
- /* get voltage */
- ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
- if (ret != 0)
- return ret;
- val &= MAX8649_VOL_MASK;
- voltage = regulator_list_voltage_linear(rdev, (unsigned char)val);
- /* get rate */
- ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
- if (ret != 0)
- return ret;
- ret = (val & MAX8649_RAMP_MASK) >> 5;
- rate = (32 * 1000) >> ret; /* uV/uS */
- return DIV_ROUND_UP(voltage, rate);
- }
- static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
- {
- struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
- switch (mode) {
- case REGULATOR_MODE_FAST:
- regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
- MAX8649_FORCE_PWM, MAX8649_FORCE_PWM);
- break;
- case REGULATOR_MODE_NORMAL:
- regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
- MAX8649_FORCE_PWM, 0);
- break;
- default:
- return -EINVAL;
- }
- return 0;
- }
- static unsigned int max8649_get_mode(struct regulator_dev *rdev)
- {
- struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
- unsigned int val;
- int ret;
- ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
- if (ret != 0)
- return ret;
- if (val & MAX8649_FORCE_PWM)
- return REGULATOR_MODE_FAST;
- return REGULATOR_MODE_NORMAL;
- }
- static const struct regulator_ops max8649_dcdc_ops = {
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear,
- .map_voltage = regulator_map_voltage_linear,
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
- .enable_time = max8649_enable_time,
- .set_mode = max8649_set_mode,
- .get_mode = max8649_get_mode,
- };
- static struct regulator_desc dcdc_desc = {
- .name = "max8649",
- .ops = &max8649_dcdc_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 1 << 6,
- .owner = THIS_MODULE,
- .vsel_mask = MAX8649_VOL_MASK,
- .min_uV = MAX8649_DCDC_VMIN,
- .uV_step = MAX8649_DCDC_STEP,
- .enable_reg = MAX8649_CONTROL,
- .enable_mask = MAX8649_EN_PD,
- .enable_is_inverted = true,
- };
- static const struct regmap_config max8649_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- };
- static int max8649_regulator_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- struct max8649_platform_data *pdata = dev_get_platdata(&client->dev);
- struct max8649_regulator_info *info = NULL;
- struct regulator_dev *regulator;
- struct regulator_config config = { };
- unsigned int val;
- unsigned char data;
- int ret;
- info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info),
- GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config);
- if (IS_ERR(info->regmap)) {
- ret = PTR_ERR(info->regmap);
- dev_err(&client->dev, "Failed to allocate register map: %d\n", ret);
- return ret;
- }
- info->dev = &client->dev;
- i2c_set_clientdata(client, info);
- info->mode = pdata->mode;
- switch (info->mode) {
- case 0:
- dcdc_desc.vsel_reg = MAX8649_MODE0;
- break;
- case 1:
- dcdc_desc.vsel_reg = MAX8649_MODE1;
- break;
- case 2:
- dcdc_desc.vsel_reg = MAX8649_MODE2;
- break;
- case 3:
- dcdc_desc.vsel_reg = MAX8649_MODE3;
- break;
- default:
- break;
- }
- ret = regmap_read(info->regmap, MAX8649_CHIP_ID1, &val);
- if (ret != 0) {
- dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
- ret);
- return ret;
- }
- dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", val);
- /* enable VID0 & VID1 */
- regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_VID_MASK, 0);
- /* enable/disable external clock synchronization */
- info->extclk = pdata->extclk;
- data = (info->extclk) ? MAX8649_SYNC_EXTCLK : 0;
- regmap_update_bits(info->regmap, dcdc_desc.vsel_reg,
- MAX8649_SYNC_EXTCLK, data);
- if (info->extclk) {
- /* set external clock frequency */
- info->extclk_freq = pdata->extclk_freq;
- regmap_update_bits(info->regmap, MAX8649_SYNC, MAX8649_EXT_MASK,
- info->extclk_freq << 6);
- }
- if (pdata->ramp_timing) {
- info->ramp_timing = pdata->ramp_timing;
- regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_MASK,
- info->ramp_timing << 5);
- }
- info->ramp_down = pdata->ramp_down;
- if (info->ramp_down) {
- regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_DOWN,
- MAX8649_RAMP_DOWN);
- }
- config.dev = &client->dev;
- config.init_data = pdata->regulator;
- config.driver_data = info;
- config.regmap = info->regmap;
- regulator = devm_regulator_register(&client->dev, &dcdc_desc,
- &config);
- if (IS_ERR(regulator)) {
- dev_err(info->dev, "failed to register regulator %s\n",
- dcdc_desc.name);
- return PTR_ERR(regulator);
- }
- return 0;
- }
- static const struct i2c_device_id max8649_id[] = {
- { "max8649", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(i2c, max8649_id);
- static struct i2c_driver max8649_driver = {
- .probe = max8649_regulator_probe,
- .driver = {
- .name = "max8649",
- },
- .id_table = max8649_id,
- };
- static int __init max8649_init(void)
- {
- return i2c_add_driver(&max8649_driver);
- }
- subsys_initcall(max8649_init);
- static void __exit max8649_exit(void)
- {
- i2c_del_driver(&max8649_driver);
- }
- module_exit(max8649_exit);
- /* Module information */
- MODULE_DESCRIPTION("MAXIM 8649 voltage regulator driver");
- MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
- MODULE_LICENSE("GPL");
|