123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263 |
- /*
- * ST Microelectronics SPEAr Pulse Width Modulator driver
- *
- * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- #include <linux/clk.h>
- #include <linux/err.h>
- #include <linux/io.h>
- #include <linux/ioport.h>
- #include <linux/kernel.h>
- #include <linux/math64.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/pwm.h>
- #include <linux/slab.h>
- #include <linux/types.h>
- #define NUM_PWM 4
- /* PWM registers and bits definitions */
- #define PWMCR 0x00 /* Control Register */
- #define PWMCR_PWM_ENABLE 0x1
- #define PWMCR_PRESCALE_SHIFT 2
- #define PWMCR_MIN_PRESCALE 0x00
- #define PWMCR_MAX_PRESCALE 0x3FFF
- #define PWMDCR 0x04 /* Duty Cycle Register */
- #define PWMDCR_MIN_DUTY 0x0001
- #define PWMDCR_MAX_DUTY 0xFFFF
- #define PWMPCR 0x08 /* Period Register */
- #define PWMPCR_MIN_PERIOD 0x0001
- #define PWMPCR_MAX_PERIOD 0xFFFF
- /* Following only available on 13xx SoCs */
- #define PWMMCR 0x3C /* Master Control Register */
- #define PWMMCR_PWM_ENABLE 0x1
- /**
- * struct spear_pwm_chip - struct representing pwm chip
- *
- * @mmio_base: base address of pwm chip
- * @clk: pointer to clk structure of pwm chip
- * @chip: linux pwm chip representation
- */
- struct spear_pwm_chip {
- void __iomem *mmio_base;
- struct clk *clk;
- struct pwm_chip chip;
- };
- static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
- {
- return container_of(chip, struct spear_pwm_chip, chip);
- }
- static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
- unsigned long offset)
- {
- return readl_relaxed(chip->mmio_base + (num << 4) + offset);
- }
- static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
- unsigned int num, unsigned long offset,
- unsigned long val)
- {
- writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
- }
- static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
- {
- struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
- u64 val, div, clk_rate;
- unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
- int ret;
- /*
- * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
- * according to formulas described below:
- *
- * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
- * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- *
- * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
- * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
- */
- clk_rate = clk_get_rate(pc->clk);
- while (1) {
- div = 1000000000;
- div *= 1 + prescale;
- val = clk_rate * period_ns;
- pv = div64_u64(val, div);
- val = clk_rate * duty_ns;
- dc = div64_u64(val, div);
- /* if duty_ns and period_ns are not achievable then return */
- if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
- return -EINVAL;
- /*
- * if pv and dc have crossed their upper limit, then increase
- * prescale and recalculate pv and dc.
- */
- if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
- if (++prescale > PWMCR_MAX_PRESCALE)
- return -EINVAL;
- continue;
- }
- break;
- }
- /*
- * NOTE: the clock to PWM has to be enabled first before writing to the
- * registers.
- */
- ret = clk_enable(pc->clk);
- if (ret)
- return ret;
- spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
- prescale << PWMCR_PRESCALE_SHIFT);
- spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
- spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
- clk_disable(pc->clk);
- return 0;
- }
- static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
- int rc = 0;
- u32 val;
- rc = clk_enable(pc->clk);
- if (rc)
- return rc;
- val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
- val |= PWMCR_PWM_ENABLE;
- spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
- return 0;
- }
- static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
- u32 val;
- val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
- val &= ~PWMCR_PWM_ENABLE;
- spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
- clk_disable(pc->clk);
- }
- static const struct pwm_ops spear_pwm_ops = {
- .config = spear_pwm_config,
- .enable = spear_pwm_enable,
- .disable = spear_pwm_disable,
- .owner = THIS_MODULE,
- };
- static int spear_pwm_probe(struct platform_device *pdev)
- {
- struct device_node *np = pdev->dev.of_node;
- struct spear_pwm_chip *pc;
- struct resource *r;
- int ret;
- u32 val;
- pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
- if (!pc)
- return -ENOMEM;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(pc->mmio_base))
- return PTR_ERR(pc->mmio_base);
- pc->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pc->clk))
- return PTR_ERR(pc->clk);
- platform_set_drvdata(pdev, pc);
- pc->chip.dev = &pdev->dev;
- pc->chip.ops = &spear_pwm_ops;
- pc->chip.base = -1;
- pc->chip.npwm = NUM_PWM;
- ret = clk_prepare(pc->clk);
- if (ret)
- return ret;
- if (of_device_is_compatible(np, "st,spear1340-pwm")) {
- ret = clk_enable(pc->clk);
- if (ret) {
- clk_unprepare(pc->clk);
- return ret;
- }
- /*
- * Following enables PWM chip, channels would still be
- * enabled individually through their control register
- */
- val = readl_relaxed(pc->mmio_base + PWMMCR);
- val |= PWMMCR_PWM_ENABLE;
- writel_relaxed(val, pc->mmio_base + PWMMCR);
- clk_disable(pc->clk);
- }
- ret = pwmchip_add(&pc->chip);
- if (ret < 0) {
- clk_unprepare(pc->clk);
- dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
- }
- return ret;
- }
- static int spear_pwm_remove(struct platform_device *pdev)
- {
- struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
- /* clk was prepared in probe, hence unprepare it here */
- clk_unprepare(pc->clk);
- return pwmchip_remove(&pc->chip);
- }
- static const struct of_device_id spear_pwm_of_match[] = {
- { .compatible = "st,spear320-pwm" },
- { .compatible = "st,spear1340-pwm" },
- { }
- };
- MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
- static struct platform_driver spear_pwm_driver = {
- .driver = {
- .name = "spear-pwm",
- .of_match_table = spear_pwm_of_match,
- },
- .probe = spear_pwm_probe,
- .remove = spear_pwm_remove,
- };
- module_platform_driver(spear_pwm_driver);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
- MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
- MODULE_ALIAS("platform:spear-pwm");
|