123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411 |
- /*
- * Core driver for the generic pin config portions of the pin control subsystem
- *
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
- #define pr_fmt(fmt) "generic pinconfig core: " fmt
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/pinctrl/pinconf.h>
- #include <linux/pinctrl/pinconf-generic.h>
- #include <linux/of.h>
- #include "core.h"
- #include "pinconf.h"
- #include "pinctrl-utils.h"
- #ifdef CONFIG_DEBUG_FS
- static const struct pin_config_item conf_items[] = {
- PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
- "input bias pull to pin specific state", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
- PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false),
- PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false),
- PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false),
- PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA", true),
- PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "usec", true),
- PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", NULL, false),
- PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false),
- PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false),
- PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
- PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false),
- PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
- PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
- PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
- PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
- };
- static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
- struct seq_file *s, const char *gname,
- unsigned pin,
- const struct pin_config_item *items,
- int nitems, int *print_sep)
- {
- int i;
- for (i = 0; i < nitems; i++) {
- unsigned long config;
- int ret;
- /* We want to check out this parameter */
- config = pinconf_to_config_packed(items[i].param, 0);
- if (gname)
- ret = pin_config_group_get(dev_name(pctldev->dev),
- gname, &config);
- else
- ret = pin_config_get_for_pin(pctldev, pin, &config);
- /* These are legal errors */
- if (ret == -EINVAL || ret == -ENOTSUPP)
- continue;
- if (ret) {
- seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
- continue;
- }
- /* comma between multiple configs */
- if (*print_sep)
- seq_puts(s, ", ");
- *print_sep = 1;
- seq_puts(s, items[i].display);
- /* Print unit if available */
- if (items[i].has_arg) {
- seq_printf(s, " (%u",
- pinconf_to_config_argument(config));
- if (items[i].format)
- seq_printf(s, " %s)", items[i].format);
- else
- seq_puts(s, ")");
- }
- }
- }
- /**
- * pinconf_generic_dump_pins - Print information about pin or group of pins
- * @pctldev: Pincontrol device
- * @s: File to print to
- * @gname: Group name specifying pins
- * @pin: Pin number specyfying pin
- *
- * Print the pinconf configuration for the requested pin(s) to @s. Pins can be
- * specified either by pin using @pin or by group using @gname. Only one needs
- * to be specified the other can be NULL/0.
- */
- void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
- const char *gname, unsigned pin)
- {
- const struct pinconf_ops *ops = pctldev->desc->confops;
- int print_sep = 0;
- if (!ops->is_generic)
- return;
- /* generic parameters */
- pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
- ARRAY_SIZE(conf_items), &print_sep);
- /* driver-specific parameters */
- if (pctldev->desc->num_custom_params &&
- pctldev->desc->custom_conf_items)
- pinconf_generic_dump_one(pctldev, s, gname, pin,
- pctldev->desc->custom_conf_items,
- pctldev->desc->num_custom_params,
- &print_sep);
- }
- void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
- struct seq_file *s, unsigned long config)
- {
- int i;
- for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
- if (pinconf_to_config_param(config) != conf_items[i].param)
- continue;
- seq_printf(s, "%s: 0x%x", conf_items[i].display,
- pinconf_to_config_argument(config));
- }
- if (!pctldev->desc->num_custom_params ||
- !pctldev->desc->custom_conf_items)
- return;
- for (i = 0; i < pctldev->desc->num_custom_params; i++) {
- if (pinconf_to_config_param(config) !=
- pctldev->desc->custom_conf_items[i].param)
- continue;
- seq_printf(s, "%s: 0x%x",
- pctldev->desc->custom_conf_items[i].display,
- pinconf_to_config_argument(config));
- }
- }
- EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
- #endif
- #ifdef CONFIG_OF
- static const struct pinconf_generic_params dt_params[] = {
- { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
- { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
- { "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
- { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
- { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
- { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
- { "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
- { "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
- { "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
- { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
- { "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 },
- { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
- { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
- { "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 },
- { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
- { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
- { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
- { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
- { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 },
- { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
- { "output-high", PIN_CONFIG_OUTPUT, 1, },
- { "output-low", PIN_CONFIG_OUTPUT, 0, },
- { "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
- { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
- { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
- };
- /**
- * parse_dt_cfg() - Parse DT pinconf parameters
- * @np: DT node
- * @params: Array of describing generic parameters
- * @count: Number of entries in @params
- * @cfg: Array of parsed config options
- * @ncfg: Number of entries in @cfg
- *
- * Parse the config options described in @params from @np and puts the result
- * in @cfg. @cfg does not need to be empty, entries are added beginning at
- * @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg
- * needs to have enough memory allocated to hold all possible entries.
- */
- static void parse_dt_cfg(struct device_node *np,
- const struct pinconf_generic_params *params,
- unsigned int count, unsigned long *cfg,
- unsigned int *ncfg)
- {
- int i;
- for (i = 0; i < count; i++) {
- u32 val;
- int ret;
- const struct pinconf_generic_params *par = ¶ms[i];
- ret = of_property_read_u32(np, par->property, &val);
- /* property not found */
- if (ret == -EINVAL)
- continue;
- /* use default value, when no value is specified */
- if (ret)
- val = par->default_value;
- pr_debug("found %s with value %u\n", par->property, val);
- cfg[*ncfg] = pinconf_to_config_packed(par->param, val);
- (*ncfg)++;
- }
- }
- /**
- * pinconf_generic_parse_dt_config()
- * parse the config properties into generic pinconfig values.
- * @np: node containing the pinconfig properties
- * @configs: array with nconfigs entries containing the generic pinconf values
- * must be freed when no longer necessary.
- * @nconfigs: umber of configurations
- */
- int pinconf_generic_parse_dt_config(struct device_node *np,
- struct pinctrl_dev *pctldev,
- unsigned long **configs,
- unsigned int *nconfigs)
- {
- unsigned long *cfg;
- unsigned int max_cfg, ncfg = 0;
- int ret;
- if (!np)
- return -EINVAL;
- /* allocate a temporary array big enough to hold one of each option */
- max_cfg = ARRAY_SIZE(dt_params);
- if (pctldev)
- max_cfg += pctldev->desc->num_custom_params;
- cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL);
- if (!cfg)
- return -ENOMEM;
- parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
- if (pctldev && pctldev->desc->num_custom_params &&
- pctldev->desc->custom_params)
- parse_dt_cfg(np, pctldev->desc->custom_params,
- pctldev->desc->num_custom_params, cfg, &ncfg);
- ret = 0;
- /* no configs found at all */
- if (ncfg == 0) {
- *configs = NULL;
- *nconfigs = 0;
- goto out;
- }
- /*
- * Now limit the number of configs to the real number of
- * found properties.
- */
- *configs = kmemdup(cfg, ncfg * sizeof(unsigned long), GFP_KERNEL);
- if (!*configs) {
- ret = -ENOMEM;
- goto out;
- }
- *nconfigs = ncfg;
- out:
- kfree(cfg);
- return ret;
- }
- int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np, struct pinctrl_map **map,
- unsigned *reserved_maps, unsigned *num_maps,
- enum pinctrl_map_type type)
- {
- int ret;
- const char *function;
- struct device *dev = pctldev->dev;
- unsigned long *configs = NULL;
- unsigned num_configs = 0;
- unsigned reserve, strings_count;
- struct property *prop;
- const char *group;
- const char *subnode_target_type = "pins";
- ret = of_property_count_strings(np, "pins");
- if (ret < 0) {
- ret = of_property_count_strings(np, "groups");
- if (ret < 0)
- /* skip this node; may contain config child nodes */
- return 0;
- if (type == PIN_MAP_TYPE_INVALID)
- type = PIN_MAP_TYPE_CONFIGS_GROUP;
- subnode_target_type = "groups";
- } else {
- if (type == PIN_MAP_TYPE_INVALID)
- type = PIN_MAP_TYPE_CONFIGS_PIN;
- }
- strings_count = ret;
- ret = of_property_read_string(np, "function", &function);
- if (ret < 0) {
- /* EINVAL=missing, which is fine since it's optional */
- if (ret != -EINVAL)
- dev_err(dev, "%pOF: could not parse property function\n",
- np);
- function = NULL;
- }
- ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
- &num_configs);
- if (ret < 0) {
- dev_err(dev, "%pOF: could not parse node property\n", np);
- return ret;
- }
- reserve = 0;
- if (function != NULL)
- reserve++;
- if (num_configs)
- reserve++;
- reserve *= strings_count;
- ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
- num_maps, reserve);
- if (ret < 0)
- goto exit;
- of_property_for_each_string(np, subnode_target_type, prop, group) {
- if (function) {
- ret = pinctrl_utils_add_map_mux(pctldev, map,
- reserved_maps, num_maps, group,
- function);
- if (ret < 0)
- goto exit;
- }
- if (num_configs) {
- ret = pinctrl_utils_add_map_configs(pctldev, map,
- reserved_maps, num_maps, group, configs,
- num_configs, type);
- if (ret < 0)
- goto exit;
- }
- }
- ret = 0;
- exit:
- kfree(configs);
- return ret;
- }
- EXPORT_SYMBOL_GPL(pinconf_generic_dt_subnode_to_map);
- int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np_config, struct pinctrl_map **map,
- unsigned *num_maps, enum pinctrl_map_type type)
- {
- unsigned reserved_maps;
- struct device_node *np;
- int ret;
- reserved_maps = 0;
- *map = NULL;
- *num_maps = 0;
- ret = pinconf_generic_dt_subnode_to_map(pctldev, np_config, map,
- &reserved_maps, num_maps, type);
- if (ret < 0)
- goto exit;
- for_each_available_child_of_node(np_config, np) {
- ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
- &reserved_maps, num_maps, type);
- if (ret < 0)
- goto exit;
- }
- return 0;
- exit:
- pinctrl_utils_free_map(pctldev, *map, *num_maps);
- return ret;
- }
- EXPORT_SYMBOL_GPL(pinconf_generic_dt_node_to_map);
- void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *map,
- unsigned num_maps)
- {
- pinctrl_utils_free_map(pctldev, map, num_maps);
- }
- EXPORT_SYMBOL_GPL(pinconf_generic_dt_free_map);
- #endif
|