123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181 |
- /*
- * FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
- *
- * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
- /*
- * This driver manages a bridge between an FPGA and the SDRAM used by the ARM
- * host processor system (HPS).
- *
- * The bridge contains 4 read ports, 4 write ports, and 6 command ports.
- * Reconfiguring these ports requires that no SDRAM transactions occur during
- * reconfiguration. The code reconfiguring the ports cannot run out of SDRAM
- * nor can the FPGA access the SDRAM during reconfiguration. This driver does
- * not support reconfiguring the ports. The ports are configured by code
- * running out of on chip ram before Linux is started and the configuration
- * is passed in a handoff register in the system manager.
- *
- * This driver supports enabling and disabling of the configured ports, which
- * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
- * uses the same port configuration. Bridges must be disabled before
- * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
- */
- #include <linux/fpga/fpga-bridge.h>
- #include <linux/kernel.h>
- #include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of_platform.h>
- #include <linux/regmap.h>
- #define ALT_SDR_CTL_FPGAPORTRST_OFST 0x80
- #define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK 0x00003fff
- #define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT 0
- #define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT 4
- #define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT 8
- /*
- * From the Cyclone V HPS Memory Map document:
- * These registers are used to store handoff information between the
- * preloader and the OS. These 8 registers can be used to store any
- * information. The contents of these registers have no impact on
- * the state of the HPS hardware.
- */
- #define SYSMGR_ISWGRP_HANDOFF3 (0x8C)
- #define F2S_BRIDGE_NAME "fpga2sdram"
- struct alt_fpga2sdram_data {
- struct device *dev;
- struct regmap *sdrctl;
- int mask;
- };
- static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
- {
- struct alt_fpga2sdram_data *priv = bridge->priv;
- int value;
- regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
- return (value & priv->mask) == priv->mask;
- }
- static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
- bool enable)
- {
- return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
- priv->mask, enable ? priv->mask : 0);
- }
- static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
- {
- return _alt_fpga2sdram_enable_set(bridge->priv, enable);
- }
- struct prop_map {
- char *prop_name;
- u32 *prop_value;
- u32 prop_max;
- };
- static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
- .enable_set = alt_fpga2sdram_enable_set,
- .enable_show = alt_fpga2sdram_enable_show,
- };
- static const struct of_device_id altera_fpga_of_match[] = {
- { .compatible = "altr,socfpga-fpga2sdram-bridge" },
- {},
- };
- static int alt_fpga_bridge_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct alt_fpga2sdram_data *priv;
- u32 enable;
- struct regmap *sysmgr;
- int ret = 0;
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- priv->dev = dev;
- priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
- if (IS_ERR(priv->sdrctl)) {
- dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
- return PTR_ERR(priv->sdrctl);
- }
- sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
- if (IS_ERR(sysmgr)) {
- dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
- return PTR_ERR(sysmgr);
- }
- /* Get f2s bridge configuration saved in handoff register */
- regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
- ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
- &altera_fpga2sdram_br_ops, priv);
- if (ret)
- return ret;
- dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
- if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
- if (enable > 1) {
- dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
- } else {
- dev_info(dev, "%s bridge\n",
- (enable ? "enabling" : "disabling"));
- ret = _alt_fpga2sdram_enable_set(priv, enable);
- if (ret) {
- fpga_bridge_unregister(&pdev->dev);
- return ret;
- }
- }
- }
- return ret;
- }
- static int alt_fpga_bridge_remove(struct platform_device *pdev)
- {
- fpga_bridge_unregister(&pdev->dev);
- return 0;
- }
- MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
- static struct platform_driver altera_fpga_driver = {
- .probe = alt_fpga_bridge_probe,
- .remove = alt_fpga_bridge_remove,
- .driver = {
- .name = "altera_fpga2sdram_bridge",
- .of_match_table = of_match_ptr(altera_fpga_of_match),
- },
- };
- module_platform_driver(altera_fpga_driver);
- MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
- MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
- MODULE_LICENSE("GPL v2");
|