123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388 |
- /*
- * Driver for PCA9685 16-channel 12-bit PWM LED controller
- *
- * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
- *
- * based on the pwm-twl-led.c driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
- #include <linux/acpi.h>
- #include <linux/i2c.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/property.h>
- #include <linux/pwm.h>
- #include <linux/regmap.h>
- #include <linux/slab.h>
- #include <linux/delay.h>
- /*
- * Because the PCA9685 has only one prescaler per chip, changing the period of
- * one channel affects the period of all 16 PWM outputs!
- * However, the ratio between each configured duty cycle and the chip-wide
- * period remains constant, because the OFF time is set in proportion to the
- * counter range.
- */
- #define PCA9685_MODE1 0x00
- #define PCA9685_MODE2 0x01
- #define PCA9685_SUBADDR1 0x02
- #define PCA9685_SUBADDR2 0x03
- #define PCA9685_SUBADDR3 0x04
- #define PCA9685_ALLCALLADDR 0x05
- #define PCA9685_LEDX_ON_L 0x06
- #define PCA9685_LEDX_ON_H 0x07
- #define PCA9685_LEDX_OFF_L 0x08
- #define PCA9685_LEDX_OFF_H 0x09
- #define PCA9685_ALL_LED_ON_L 0xFA
- #define PCA9685_ALL_LED_ON_H 0xFB
- #define PCA9685_ALL_LED_OFF_L 0xFC
- #define PCA9685_ALL_LED_OFF_H 0xFD
- #define PCA9685_PRESCALE 0xFE
- #define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */
- #define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */
- #define PCA9685_COUNTER_RANGE 4096
- #define PCA9685_DEFAULT_PERIOD 5000000 /* Default period_ns = 1/200 Hz */
- #define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */
- #define PCA9685_NUMREGS 0xFF
- #define PCA9685_MAXCHAN 0x10
- #define LED_FULL (1 << 4)
- #define MODE1_SLEEP (1 << 4)
- #define MODE2_INVRT (1 << 4)
- #define MODE2_OUTDRV (1 << 2)
- #define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N)))
- #define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N)))
- #define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N)))
- #define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N)))
- struct pca9685 {
- struct pwm_chip chip;
- struct regmap *regmap;
- int active_cnt;
- int duty_ns;
- int period_ns;
- };
- static inline struct pca9685 *to_pca(struct pwm_chip *chip)
- {
- return container_of(chip, struct pca9685, chip);
- }
- static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
- {
- struct pca9685 *pca = to_pca(chip);
- unsigned long long duty;
- unsigned int reg;
- int prescale;
- if (period_ns != pca->period_ns) {
- prescale = DIV_ROUND_CLOSEST(PCA9685_OSC_CLOCK_MHZ * period_ns,
- PCA9685_COUNTER_RANGE * 1000) - 1;
- if (prescale >= PCA9685_PRESCALE_MIN &&
- prescale <= PCA9685_PRESCALE_MAX) {
- /* Put chip into sleep mode */
- regmap_update_bits(pca->regmap, PCA9685_MODE1,
- MODE1_SLEEP, MODE1_SLEEP);
- /* Change the chip-wide output frequency */
- regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
- /* Wake the chip up */
- regmap_update_bits(pca->regmap, PCA9685_MODE1,
- MODE1_SLEEP, 0x0);
- /* Wait 500us for the oscillator to be back up */
- udelay(500);
- pca->period_ns = period_ns;
- } else {
- dev_err(chip->dev,
- "prescaler not set: period out of bounds!\n");
- return -EINVAL;
- }
- }
- pca->duty_ns = duty_ns;
- if (duty_ns < 1) {
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, LED_FULL);
- return 0;
- }
- if (duty_ns == period_ns) {
- /* Clear both OFF registers */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_L;
- else
- reg = LED_N_OFF_L(pwm->hwpwm);
- regmap_write(pca->regmap, reg, 0x0);
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, 0x0);
- /* Set the full ON bit */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_H;
- else
- reg = LED_N_ON_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, LED_FULL);
- return 0;
- }
- duty = PCA9685_COUNTER_RANGE * (unsigned long long)duty_ns;
- duty = DIV_ROUND_UP_ULL(duty, period_ns);
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_L;
- else
- reg = LED_N_OFF_L(pwm->hwpwm);
- regmap_write(pca->regmap, reg, (int)duty & 0xff);
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
- /* Clear the full ON bit, otherwise the set OFF time has no effect */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_H;
- else
- reg = LED_N_ON_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, 0);
- return 0;
- }
- static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct pca9685 *pca = to_pca(chip);
- unsigned int reg;
- /*
- * The PWM subsystem does not support a pre-delay.
- * So, set the ON-timeout to 0
- */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_L;
- else
- reg = LED_N_ON_L(pwm->hwpwm);
- regmap_write(pca->regmap, reg, 0);
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_ON_H;
- else
- reg = LED_N_ON_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, 0);
- /*
- * Clear the full-off bit.
- * It has precedence over the others and must be off.
- */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
- regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0);
- return 0;
- }
- static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct pca9685 *pca = to_pca(chip);
- unsigned int reg;
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_H;
- else
- reg = LED_N_OFF_H(pwm->hwpwm);
- regmap_write(pca->regmap, reg, LED_FULL);
- /* Clear the LED_OFF counter. */
- if (pwm->hwpwm >= PCA9685_MAXCHAN)
- reg = PCA9685_ALL_LED_OFF_L;
- else
- reg = LED_N_OFF_L(pwm->hwpwm);
- regmap_write(pca->regmap, reg, 0x0);
- }
- static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct pca9685 *pca = to_pca(chip);
- if (pca->active_cnt++ == 0)
- return regmap_update_bits(pca->regmap, PCA9685_MODE1,
- MODE1_SLEEP, 0x0);
- return 0;
- }
- static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct pca9685 *pca = to_pca(chip);
- if (--pca->active_cnt == 0)
- regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
- MODE1_SLEEP);
- }
- static const struct pwm_ops pca9685_pwm_ops = {
- .enable = pca9685_pwm_enable,
- .disable = pca9685_pwm_disable,
- .config = pca9685_pwm_config,
- .request = pca9685_pwm_request,
- .free = pca9685_pwm_free,
- .owner = THIS_MODULE,
- };
- static const struct regmap_config pca9685_regmap_i2c_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = PCA9685_NUMREGS,
- .cache_type = REGCACHE_NONE,
- };
- static int pca9685_pwm_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- struct pca9685 *pca;
- int ret;
- int mode2;
- pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
- if (!pca)
- return -ENOMEM;
- pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
- if (IS_ERR(pca->regmap)) {
- ret = PTR_ERR(pca->regmap);
- dev_err(&client->dev, "Failed to initialize register map: %d\n",
- ret);
- return ret;
- }
- pca->duty_ns = 0;
- pca->period_ns = PCA9685_DEFAULT_PERIOD;
- i2c_set_clientdata(client, pca);
- regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
- if (device_property_read_bool(&client->dev, "invert"))
- mode2 |= MODE2_INVRT;
- else
- mode2 &= ~MODE2_INVRT;
- if (device_property_read_bool(&client->dev, "open-drain"))
- mode2 &= ~MODE2_OUTDRV;
- else
- mode2 |= MODE2_OUTDRV;
- regmap_write(pca->regmap, PCA9685_MODE2, mode2);
- /* clear all "full off" bits */
- regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
- regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
- pca->chip.ops = &pca9685_pwm_ops;
- /* add an extra channel for ALL_LED */
- pca->chip.npwm = PCA9685_MAXCHAN + 1;
- pca->chip.dev = &client->dev;
- pca->chip.base = -1;
- pca->chip.can_sleep = true;
- return pwmchip_add(&pca->chip);
- }
- static int pca9685_pwm_remove(struct i2c_client *client)
- {
- struct pca9685 *pca = i2c_get_clientdata(client);
- regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
- MODE1_SLEEP);
- return pwmchip_remove(&pca->chip);
- }
- static const struct i2c_device_id pca9685_id[] = {
- { "pca9685", 0 },
- { /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(i2c, pca9685_id);
- #ifdef CONFIG_ACPI
- static const struct acpi_device_id pca9685_acpi_ids[] = {
- { "INT3492", 0 },
- { /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
- #endif
- #ifdef CONFIG_OF
- static const struct of_device_id pca9685_dt_ids[] = {
- { .compatible = "nxp,pca9685-pwm", },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
- #endif
- static struct i2c_driver pca9685_i2c_driver = {
- .driver = {
- .name = "pca9685-pwm",
- .acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
- .of_match_table = of_match_ptr(pca9685_dt_ids),
- },
- .probe = pca9685_pwm_probe,
- .remove = pca9685_pwm_remove,
- .id_table = pca9685_id,
- };
- module_i2c_driver(pca9685_i2c_driver);
- MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
- MODULE_DESCRIPTION("PWM driver for PCA9685");
- MODULE_LICENSE("GPL");
|