123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179 |
- /*
- * Apple Peripheral System Controller (PSC)
- *
- * The PSC is used on the AV Macs to control IO functions not handled
- * by the VIAs (Ethernet, DSP, SCC).
- *
- * TO DO:
- *
- * Try to figure out what's going on in pIFR5 and pIFR6. There seem to be
- * persisant interrupt conditions in those registers and I have no idea what
- * they are. Granted it doesn't affect since we're not enabling any interrupts
- * on those levels at the moment, but it would be nice to know. I have a feeling
- * they aren't actually interrupt lines but data lines (to the DSP?)
- */
- #include <linux/types.h>
- #include <linux/kernel.h>
- #include <linux/mm.h>
- #include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/irq.h>
- #include <asm/traps.h>
- #include <asm/macintosh.h>
- #include <asm/macints.h>
- #include <asm/mac_psc.h>
- #define DEBUG_PSC
- volatile __u8 *psc;
- EXPORT_SYMBOL_GPL(psc);
- /*
- * Debugging dump, used in various places to see what's going on.
- */
- static void psc_debug_dump(void)
- {
- int i;
- if (!psc)
- return;
- for (i = 0x30 ; i < 0x70 ; i += 0x10) {
- printk("PSC #%d: IFR = 0x%02X IER = 0x%02X\n",
- i >> 4,
- (int) psc_read_byte(pIFRbase + i),
- (int) psc_read_byte(pIERbase + i));
- }
- }
- /*
- * Try to kill all DMA channels on the PSC. Not sure how this his
- * supposed to work; this is code lifted from macmace.c and then
- * expanded to cover what I think are the other 7 channels.
- */
- static __init void psc_dma_die_die_die(void)
- {
- int i;
- printk("Killing all PSC DMA channels...");
- for (i = 0 ; i < 9 ; i++) {
- psc_write_word(PSC_CTL_BASE + (i << 4), 0x8800);
- psc_write_word(PSC_CTL_BASE + (i << 4), 0x1000);
- psc_write_word(PSC_CMD_BASE + (i << 5), 0x1100);
- psc_write_word(PSC_CMD_BASE + (i << 5) + 0x10, 0x1100);
- }
- printk("done!\n");
- }
- /*
- * Initialize the PSC. For now this just involves shutting down all
- * interrupt sources using the IERs.
- */
- void __init psc_init(void)
- {
- int i;
- if (macintosh_config->ident != MAC_MODEL_C660
- && macintosh_config->ident != MAC_MODEL_Q840)
- {
- psc = NULL;
- return;
- }
- /*
- * The PSC is always at the same spot, but using psc
- * keeps things consistent with the psc_xxxx functions.
- */
- psc = (void *) PSC_BASE;
- printk("PSC detected at %p\n", psc);
- psc_dma_die_die_die();
- #ifdef DEBUG_PSC
- psc_debug_dump();
- #endif
- /*
- * Mask and clear all possible interrupts
- */
- for (i = 0x30 ; i < 0x70 ; i += 0x10) {
- psc_write_byte(pIERbase + i, 0x0F);
- psc_write_byte(pIFRbase + i, 0x0F);
- }
- }
- /*
- * PSC interrupt handler. It's a lot like the VIA interrupt handler.
- */
- static void psc_irq(struct irq_desc *desc)
- {
- unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
- unsigned int irq = irq_desc_get_irq(desc);
- int pIFR = pIFRbase + offset;
- int pIER = pIERbase + offset;
- int irq_num;
- unsigned char irq_bit, events;
- #ifdef DEBUG_IRQS
- printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
- irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
- #endif
- events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
- if (!events)
- return;
- irq_num = irq << 3;
- irq_bit = 1;
- do {
- if (events & irq_bit) {
- psc_write_byte(pIFR, irq_bit);
- generic_handle_irq(irq_num);
- }
- irq_num++;
- irq_bit <<= 1;
- } while (events >= irq_bit);
- }
- /*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
- void __init psc_register_interrupts(void)
- {
- irq_set_chained_handler_and_data(IRQ_AUTO_3, psc_irq, (void *)0x30);
- irq_set_chained_handler_and_data(IRQ_AUTO_4, psc_irq, (void *)0x40);
- irq_set_chained_handler_and_data(IRQ_AUTO_5, psc_irq, (void *)0x50);
- irq_set_chained_handler_and_data(IRQ_AUTO_6, psc_irq, (void *)0x60);
- }
- void psc_irq_enable(int irq) {
- int irq_src = IRQ_SRC(irq);
- int irq_idx = IRQ_IDX(irq);
- int pIER = pIERbase + (irq_src << 4);
- #ifdef DEBUG_IRQUSE
- printk("psc_irq_enable(%d)\n", irq);
- #endif
- psc_write_byte(pIER, (1 << irq_idx) | 0x80);
- }
- void psc_irq_disable(int irq) {
- int irq_src = IRQ_SRC(irq);
- int irq_idx = IRQ_IDX(irq);
- int pIER = pIERbase + (irq_src << 4);
- #ifdef DEBUG_IRQUSE
- printk("psc_irq_disable(%d)\n", irq);
- #endif
- psc_write_byte(pIER, 1 << irq_idx);
- }
|