12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879 |
- /***************************************************************************/
- /*
- * m5307.c -- platform support for ColdFire 5307 based boards
- *
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 2000, Lineo (www.lineo.com)
- */
- /***************************************************************************/
- #include <linux/kernel.h>
- #include <linux/param.h>
- #include <linux/init.h>
- #include <linux/io.h>
- #include <asm/machdep.h>
- #include <asm/coldfire.h>
- #include <asm/mcfsim.h>
- #include <asm/mcfwdebug.h>
- #include <asm/mcfclk.h>
- /***************************************************************************/
- /*
- * Some platforms need software versions of the GPIO data registers.
- */
- unsigned short ppdata;
- unsigned char ledbank = 0xff;
- /***************************************************************************/
- DEFINE_CLK(pll, "pll.0", MCF_CLK);
- DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
- DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
- DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
- DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
- DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
- struct clk *mcf_clks[] = {
- &clk_pll,
- &clk_sys,
- &clk_mcftmr0,
- &clk_mcftmr1,
- &clk_mcfuart0,
- &clk_mcfuart1,
- NULL
- };
- /***************************************************************************/
- void __init config_BSP(char *commandp, int size)
- {
- #if defined(CONFIG_NETtel) || \
- defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0004000, size);
- commandp[size-1] = 0;
- #endif
- mach_sched_init = hw_timer_init;
- /* Only support the external interrupts on their primary level */
- mcf_mapirq2imr(25, MCFINTC_EINT1);
- mcf_mapirq2imr(27, MCFINTC_EINT3);
- mcf_mapirq2imr(29, MCFINTC_EINT5);
- mcf_mapirq2imr(31, MCFINTC_EINT7);
- #ifdef CONFIG_BDM_DISABLE
- /*
- * Disable the BDM clocking. This also turns off most of the rest of
- * the BDM device. This is good for EMC reasons. This option is not
- * incompatible with the memory protection option.
- */
- wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
- #endif
- }
- /***************************************************************************/
|