| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546 |
- Fax with isdn4linux
- ===================
- When enabled during kernel configuration, the tty emulator
- of the ISDN subsystem is capable of the Fax Class 2 commands.
- This only makes sense under the following conditions :
- - You need the commands as dummy, because you are using
- hylafax (with patch) for AVM capi.
- - You want to use the fax capabilities of your isdn-card.
- (supported cards are listed below)
- NOTE: This implementation does *not* support fax with passive
- ISDN-cards (known as softfax). The low-level driver of
- the ISDN-card and/or the card itself must support this.
- Supported ISDN-Cards
- --------------------
- Eicon DIVA Server BRI/PCI
- - full support with both B-channels.
- Eicon DIVA Server 4BRI/PCI
- - full support with all B-channels.
- Eicon DIVA Server PRI/PCI
- - full support on amount of B-channels
- depending on DSPs on board.
- The command set is known as Class 2 (not Class 2.0) and
- can be activated by AT+FCLASS=2
- The interface between the link-level-module and the hardware-level driver
- is described in the files INTERFACE.fax and INTERFACE.
- Armin
- mac@melware.de
|
