123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303 |
- /*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2011 Wind River Systems,
- * written by Ralf Baechle (ralf@linux-mips.org)
- */
- #include <linux/bug.h>
- #include <linux/kernel.h>
- #include <linux/mm.h>
- #include <linux/bootmem.h>
- #include <linux/export.h>
- #include <linux/init.h>
- #include <linux/types.h>
- #include <linux/pci.h>
- #include <linux/of_address.h>
- #include <asm/cpu-info.h>
- /*
- * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
- * assignments.
- */
- /*
- * The PCI controller list.
- */
- static LIST_HEAD(controllers);
- static int pci_initialized;
- /*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
- resource_size_t
- pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
- {
- struct pci_dev *dev = data;
- struct pci_controller *hose = dev->sysdata;
- resource_size_t start = res->start;
- if (res->flags & IORESOURCE_IO) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
- start = PCIBIOS_MIN_IO + hose->io_resource->start;
- /*
- * Put everything into 0x00-0xff region modulo 0x400
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- } else if (res->flags & IORESOURCE_MEM) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
- start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
- }
- return start;
- }
- static void pcibios_scanbus(struct pci_controller *hose)
- {
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct pci_bus *bus;
- if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
- next_busno = (*hose->get_busno)();
- pci_add_resource_offset(&resources,
- hose->mem_resource, hose->mem_offset);
- pci_add_resource_offset(&resources,
- hose->io_resource, hose->io_offset);
- pci_add_resource_offset(&resources,
- hose->busn_resource, hose->busn_offset);
- bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
- &resources);
- hose->bus = bus;
- need_domain_info = need_domain_info || pci_domain_nr(bus);
- set_pci_need_domain_info(hose, need_domain_info);
- if (!bus) {
- pci_free_resource_list(&resources);
- return;
- }
- next_busno = bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
- /*
- * We insert PCI resources into the iomem_resource and
- * ioport_resource trees in either pci_bus_claim_resources()
- * or pci_bus_assign_resources().
- */
- if (pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_claim_resources(bus);
- } else {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
- }
- pci_bus_add_devices(bus);
- }
- #ifdef CONFIG_OF
- void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
- {
- struct of_pci_range range;
- struct of_pci_range_parser parser;
- pr_info("PCI host bridge %s ranges:\n", node->full_name);
- hose->of_node = node;
- if (of_pci_range_parser_init(&parser, node))
- return;
- for_each_of_pci_range(&parser, &range) {
- struct resource *res = NULL;
- switch (range.flags & IORESOURCE_TYPE_BITS) {
- case IORESOURCE_IO:
- pr_info(" IO 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- hose->io_map_base =
- (unsigned long)ioremap(range.cpu_addr,
- range.size);
- res = hose->io_resource;
- break;
- case IORESOURCE_MEM:
- pr_info(" MEM 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- res = hose->mem_resource;
- break;
- }
- if (res != NULL)
- of_pci_range_to_resource(&range, node, res);
- }
- }
- struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
- {
- struct pci_controller *hose = bus->sysdata;
- return of_node_get(hose->of_node);
- }
- #endif
- static DEFINE_MUTEX(pci_scan_mutex);
- void register_pci_controller(struct pci_controller *hose)
- {
- struct resource *parent;
- parent = hose->mem_resource->parent;
- if (!parent)
- parent = &iomem_resource;
- if (request_resource(parent, hose->mem_resource) < 0)
- goto out;
- parent = hose->io_resource->parent;
- if (!parent)
- parent = &ioport_resource;
- if (request_resource(parent, hose->io_resource) < 0) {
- release_resource(hose->mem_resource);
- goto out;
- }
- INIT_LIST_HEAD(&hose->list);
- list_add(&hose->list, &controllers);
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- printk(KERN_WARNING
- "registering PCI controller with io_map_base unset\n");
- }
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
- return;
- out:
- printk(KERN_WARNING
- "Skipping PCI bus scan due to resource conflict\n");
- }
- static int __init pcibios_init(void)
- {
- struct pci_controller *hose;
- /* Scan all of the recorded PCI controllers. */
- list_for_each_entry(hose, &controllers, list)
- pcibios_scanbus(hose);
- pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
- pci_initialized = 1;
- return 0;
- }
- subsys_initcall(pcibios_init);
- static int pcibios_enable_resources(struct pci_dev *dev, int mask)
- {
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
- continue;
- r = &dev->resource[idx];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available "
- "because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
- }
- int pcibios_enable_device(struct pci_dev *dev, int mask)
- {
- int err;
- if ((err = pcibios_enable_resources(dev, mask)) < 0)
- return err;
- return pcibios_plat_dev_init(dev);
- }
- void pcibios_fixup_bus(struct pci_bus *bus)
- {
- struct pci_dev *dev = bus->self;
- if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pci_read_bridge_bases(bus);
- }
- }
- char * (*pcibios_plat_setup)(char *str) __initdata;
- char *__init pcibios_setup(char *str)
- {
- if (pcibios_plat_setup)
- return pcibios_plat_setup(str);
- return str;
- }
|