123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664 |
- /*
- * Broadcom Kona GPIO Driver
- *
- * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
- #include <linux/bitops.h>
- #include <linux/err.h>
- #include <linux/io.h>
- #include <linux/gpio.h>
- #include <linux/of_device.h>
- #include <linux/of_irq.h>
- #include <linux/init.h>
- #include <linux/irqdomain.h>
- #include <linux/irqchip/chained_irq.h>
- #define BCM_GPIO_PASSWD 0x00a5a501
- #define GPIO_PER_BANK 32
- #define GPIO_MAX_BANK_NUM 8
- #define GPIO_BANK(gpio) ((gpio) >> 5)
- #define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))
- /* There is a GPIO control register for each GPIO */
- #define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2))
- /* The remaining registers are per GPIO bank */
- #define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
- #define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
- #define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
- #define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
- #define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
- #define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
- #define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
- #define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
- #define GPIO_GPPWR_OFFSET 0x00000520
- #define GPIO_GPCTR0_DBR_SHIFT 5
- #define GPIO_GPCTR0_DBR_MASK 0x000001e0
- #define GPIO_GPCTR0_ITR_SHIFT 3
- #define GPIO_GPCTR0_ITR_MASK 0x00000018
- #define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
- #define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
- #define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
- #define GPIO_GPCTR0_IOTR_MASK 0x00000001
- #define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
- #define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
- #define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100
- #define LOCK_CODE 0xffffffff
- #define UNLOCK_CODE 0x00000000
- struct bcm_kona_gpio {
- void __iomem *reg_base;
- int num_bank;
- spinlock_t lock;
- struct gpio_chip gpio_chip;
- struct irq_domain *irq_domain;
- struct bcm_kona_gpio_bank *banks;
- struct platform_device *pdev;
- };
- struct bcm_kona_gpio_bank {
- int id;
- int irq;
- /* Used in the interrupt handler */
- struct bcm_kona_gpio *kona_gpio;
- };
- static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
- int bank_id, u32 lockcode)
- {
- writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
- writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
- }
- static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
- unsigned gpio)
- {
- u32 val;
- unsigned long flags;
- int bank_id = GPIO_BANK(gpio);
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
- val |= BIT(gpio);
- bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- }
- static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
- unsigned gpio)
- {
- u32 val;
- unsigned long flags;
- int bank_id = GPIO_BANK(gpio);
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
- val &= ~BIT(gpio);
- bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- }
- static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
- void __iomem *reg_base = kona_gpio->reg_base;
- u32 val;
- val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
- return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
- }
- static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- int bank_id = GPIO_BANK(gpio);
- int bit = GPIO_BIT(gpio);
- u32 val, reg_offset;
- unsigned long flags;
- kona_gpio = gpiochip_get_data(chip);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- /* this function only applies to output pin */
- if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
- goto out;
- reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
- val = readl(reg_base + reg_offset);
- val |= BIT(bit);
- writel(val, reg_base + reg_offset);
- out:
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- }
- static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- int bank_id = GPIO_BANK(gpio);
- int bit = GPIO_BIT(gpio);
- u32 val, reg_offset;
- unsigned long flags;
- kona_gpio = gpiochip_get_data(chip);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
- reg_offset = GPIO_IN_STATUS(bank_id);
- else
- reg_offset = GPIO_OUT_STATUS(bank_id);
- /* read the GPIO bank status */
- val = readl(reg_base + reg_offset);
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- /* return the specified bit status */
- return !!(val & BIT(bit));
- }
- static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
- bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
- return 0;
- }
- static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
- bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
- }
- static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- u32 val;
- unsigned long flags;
- kona_gpio = gpiochip_get_data(chip);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_CONTROL(gpio));
- val &= ~GPIO_GPCTR0_IOTR_MASK;
- val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
- writel(val, reg_base + GPIO_CONTROL(gpio));
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- return 0;
- }
- static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
- unsigned gpio, int value)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- int bank_id = GPIO_BANK(gpio);
- int bit = GPIO_BIT(gpio);
- u32 val, reg_offset;
- unsigned long flags;
- kona_gpio = gpiochip_get_data(chip);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_CONTROL(gpio));
- val &= ~GPIO_GPCTR0_IOTR_MASK;
- val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
- writel(val, reg_base + GPIO_CONTROL(gpio));
- reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
- val = readl(reg_base + reg_offset);
- val |= BIT(bit);
- writel(val, reg_base + reg_offset);
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- return 0;
- }
- static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcm_kona_gpio *kona_gpio;
- kona_gpio = gpiochip_get_data(chip);
- if (gpio >= kona_gpio->gpio_chip.ngpio)
- return -ENXIO;
- return irq_create_mapping(kona_gpio->irq_domain, gpio);
- }
- static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
- unsigned debounce)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- u32 val, res;
- unsigned long flags;
- kona_gpio = gpiochip_get_data(chip);
- reg_base = kona_gpio->reg_base;
- /* debounce must be 1-128ms (or 0) */
- if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
- dev_err(chip->parent, "Debounce value %u not in range\n",
- debounce);
- return -EINVAL;
- }
- /* calculate debounce bit value */
- if (debounce != 0) {
- /* Convert to ms */
- debounce /= 1000;
- /* find the MSB */
- res = fls(debounce) - 1;
- /* Check if MSB-1 is set (round up or down) */
- if (res > 0 && (debounce & BIT(res - 1)))
- res++;
- }
- /* spin lock for read-modify-write of the GPIO register */
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_CONTROL(gpio));
- val &= ~GPIO_GPCTR0_DBR_MASK;
- if (debounce == 0) {
- /* disable debounce */
- val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
- } else {
- val |= GPIO_GPCTR0_DB_ENABLE_MASK |
- (res << GPIO_GPCTR0_DBR_SHIFT);
- }
- writel(val, reg_base + GPIO_CONTROL(gpio));
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- return 0;
- }
- static const struct gpio_chip template_chip = {
- .label = "bcm-kona-gpio",
- .owner = THIS_MODULE,
- .request = bcm_kona_gpio_request,
- .free = bcm_kona_gpio_free,
- .get_direction = bcm_kona_gpio_get_dir,
- .direction_input = bcm_kona_gpio_direction_input,
- .get = bcm_kona_gpio_get,
- .direction_output = bcm_kona_gpio_direction_output,
- .set = bcm_kona_gpio_set,
- .set_debounce = bcm_kona_gpio_set_debounce,
- .to_irq = bcm_kona_gpio_to_irq,
- .base = 0,
- };
- static void bcm_kona_gpio_irq_ack(struct irq_data *d)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- unsigned gpio = d->hwirq;
- int bank_id = GPIO_BANK(gpio);
- int bit = GPIO_BIT(gpio);
- u32 val;
- unsigned long flags;
- kona_gpio = irq_data_get_irq_chip_data(d);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_INT_STATUS(bank_id));
- val |= BIT(bit);
- writel(val, reg_base + GPIO_INT_STATUS(bank_id));
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- }
- static void bcm_kona_gpio_irq_mask(struct irq_data *d)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- unsigned gpio = d->hwirq;
- int bank_id = GPIO_BANK(gpio);
- int bit = GPIO_BIT(gpio);
- u32 val;
- unsigned long flags;
- kona_gpio = irq_data_get_irq_chip_data(d);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_INT_MASK(bank_id));
- val |= BIT(bit);
- writel(val, reg_base + GPIO_INT_MASK(bank_id));
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- }
- static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- unsigned gpio = d->hwirq;
- int bank_id = GPIO_BANK(gpio);
- int bit = GPIO_BIT(gpio);
- u32 val;
- unsigned long flags;
- kona_gpio = irq_data_get_irq_chip_data(d);
- reg_base = kona_gpio->reg_base;
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
- val |= BIT(bit);
- writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- }
- static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
- {
- struct bcm_kona_gpio *kona_gpio;
- void __iomem *reg_base;
- unsigned gpio = d->hwirq;
- u32 lvl_type;
- u32 val;
- unsigned long flags;
- kona_gpio = irq_data_get_irq_chip_data(d);
- reg_base = kona_gpio->reg_base;
- switch (type & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_EDGE_RISING:
- lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- case IRQ_TYPE_LEVEL_LOW:
- /* BCM GPIO doesn't support level triggering */
- default:
- dev_err(kona_gpio->gpio_chip.parent,
- "Invalid BCM GPIO irq type 0x%x\n", type);
- return -EINVAL;
- }
- spin_lock_irqsave(&kona_gpio->lock, flags);
- val = readl(reg_base + GPIO_CONTROL(gpio));
- val &= ~GPIO_GPCTR0_ITR_MASK;
- val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
- writel(val, reg_base + GPIO_CONTROL(gpio));
- spin_unlock_irqrestore(&kona_gpio->lock, flags);
- return 0;
- }
- static void bcm_kona_gpio_irq_handler(struct irq_desc *desc)
- {
- void __iomem *reg_base;
- int bit, bank_id;
- unsigned long sta;
- struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- chained_irq_enter(chip, desc);
- /*
- * For bank interrupts, we can't use chip_data to store the kona_gpio
- * pointer, since GIC needs it for its own purposes. Therefore, we get
- * our pointer from the bank structure.
- */
- reg_base = bank->kona_gpio->reg_base;
- bank_id = bank->id;
- while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
- (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
- for_each_set_bit(bit, &sta, 32) {
- int hwirq = GPIO_PER_BANK * bank_id + bit;
- int child_irq =
- irq_find_mapping(bank->kona_gpio->irq_domain,
- hwirq);
- /*
- * Clear interrupt before handler is called so we don't
- * miss any interrupt occurred during executing them.
- */
- writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
- BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
- /* Invoke interrupt handler */
- generic_handle_irq(child_irq);
- }
- }
- chained_irq_exit(chip, desc);
- }
- static int bcm_kona_gpio_irq_reqres(struct irq_data *d)
- {
- struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
- if (gpiochip_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq)) {
- dev_err(kona_gpio->gpio_chip.parent,
- "unable to lock HW IRQ %lu for IRQ\n",
- d->hwirq);
- return -EINVAL;
- }
- return 0;
- }
- static void bcm_kona_gpio_irq_relres(struct irq_data *d)
- {
- struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
- gpiochip_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq);
- }
- static struct irq_chip bcm_gpio_irq_chip = {
- .name = "bcm-kona-gpio",
- .irq_ack = bcm_kona_gpio_irq_ack,
- .irq_mask = bcm_kona_gpio_irq_mask,
- .irq_unmask = bcm_kona_gpio_irq_unmask,
- .irq_set_type = bcm_kona_gpio_irq_set_type,
- .irq_request_resources = bcm_kona_gpio_irq_reqres,
- .irq_release_resources = bcm_kona_gpio_irq_relres,
- };
- static struct of_device_id const bcm_kona_gpio_of_match[] = {
- { .compatible = "brcm,kona-gpio" },
- {}
- };
- /*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
- static struct lock_class_key gpio_lock_class;
- static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hwirq)
- {
- int ret;
- ret = irq_set_chip_data(irq, d->host_data);
- if (ret < 0)
- return ret;
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
- irq_set_noprobe(irq);
- return 0;
- }
- static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
- {
- irq_set_chip_and_handler(irq, NULL, NULL);
- irq_set_chip_data(irq, NULL);
- }
- static const struct irq_domain_ops bcm_kona_irq_ops = {
- .map = bcm_kona_gpio_irq_map,
- .unmap = bcm_kona_gpio_irq_unmap,
- .xlate = irq_domain_xlate_twocell,
- };
- static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
- {
- void __iomem *reg_base;
- int i;
- reg_base = kona_gpio->reg_base;
- /* disable interrupts and clear status */
- for (i = 0; i < kona_gpio->num_bank; i++) {
- /* Unlock the entire bank first */
- bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
- writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
- writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
- /* Now re-lock the bank */
- bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
- }
- }
- static int bcm_kona_gpio_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- const struct of_device_id *match;
- struct resource *res;
- struct bcm_kona_gpio_bank *bank;
- struct bcm_kona_gpio *kona_gpio;
- struct gpio_chip *chip;
- int ret;
- int i;
- match = of_match_device(bcm_kona_gpio_of_match, dev);
- if (!match) {
- dev_err(dev, "Failed to find gpio controller\n");
- return -ENODEV;
- }
- kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
- if (!kona_gpio)
- return -ENOMEM;
- kona_gpio->gpio_chip = template_chip;
- chip = &kona_gpio->gpio_chip;
- kona_gpio->num_bank = of_irq_count(dev->of_node);
- if (kona_gpio->num_bank == 0) {
- dev_err(dev, "Couldn't determine # GPIO banks\n");
- return -ENOENT;
- }
- if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
- dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
- GPIO_MAX_BANK_NUM);
- return -ENXIO;
- }
- kona_gpio->banks = devm_kzalloc(dev,
- kona_gpio->num_bank *
- sizeof(*kona_gpio->banks), GFP_KERNEL);
- if (!kona_gpio->banks)
- return -ENOMEM;
- kona_gpio->pdev = pdev;
- platform_set_drvdata(pdev, kona_gpio);
- chip->of_node = dev->of_node;
- chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
- kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
- chip->ngpio,
- &bcm_kona_irq_ops,
- kona_gpio);
- if (!kona_gpio->irq_domain) {
- dev_err(dev, "Couldn't allocate IRQ domain\n");
- return -ENXIO;
- }
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- kona_gpio->reg_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(kona_gpio->reg_base)) {
- ret = -ENXIO;
- goto err_irq_domain;
- }
- for (i = 0; i < kona_gpio->num_bank; i++) {
- bank = &kona_gpio->banks[i];
- bank->id = i;
- bank->irq = platform_get_irq(pdev, i);
- bank->kona_gpio = kona_gpio;
- if (bank->irq < 0) {
- dev_err(dev, "Couldn't get IRQ for bank %d", i);
- ret = -ENOENT;
- goto err_irq_domain;
- }
- }
- dev_info(&pdev->dev, "Setting up Kona GPIO\n");
- bcm_kona_gpio_reset(kona_gpio);
- ret = devm_gpiochip_add_data(dev, chip, kona_gpio);
- if (ret < 0) {
- dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
- goto err_irq_domain;
- }
- for (i = 0; i < kona_gpio->num_bank; i++) {
- bank = &kona_gpio->banks[i];
- irq_set_chained_handler_and_data(bank->irq,
- bcm_kona_gpio_irq_handler,
- bank);
- }
- spin_lock_init(&kona_gpio->lock);
- return 0;
- err_irq_domain:
- irq_domain_remove(kona_gpio->irq_domain);
- return ret;
- }
- static struct platform_driver bcm_kona_gpio_driver = {
- .driver = {
- .name = "bcm-kona-gpio",
- .of_match_table = bcm_kona_gpio_of_match,
- },
- .probe = bcm_kona_gpio_probe,
- };
- builtin_platform_driver(bcm_kona_gpio_driver);
|