123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347 |
- /*
- * Hitachi Audio Controller (AC97) support for SH7760/SH7780
- *
- * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
- * licensed under the terms outlined in the file COPYING at the root
- * of the linux kernel sources.
- *
- * dont forget to set IPSEL/OMSEL register bits (in your board code) to
- * enable HAC output pins!
- */
- /* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
- * the FIRST can be used since ASoC does not pass any information to the
- * ac97_read/write() functions regarding WHICH unit to use. You'll have
- * to edit the code a bit to use the other AC97 unit. --mlau
- */
- #include <linux/init.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/interrupt.h>
- #include <linux/wait.h>
- #include <linux/delay.h>
- #include <sound/core.h>
- #include <sound/pcm.h>
- #include <sound/ac97_codec.h>
- #include <sound/initval.h>
- #include <sound/soc.h>
- /* regs and bits */
- #define HACCR 0x08
- #define HACCSAR 0x20
- #define HACCSDR 0x24
- #define HACPCML 0x28
- #define HACPCMR 0x2C
- #define HACTIER 0x50
- #define HACTSR 0x54
- #define HACRIER 0x58
- #define HACRSR 0x5C
- #define HACACR 0x60
- #define CR_CR (1 << 15) /* "codec-ready" indicator */
- #define CR_CDRT (1 << 11) /* cold reset */
- #define CR_WMRT (1 << 10) /* warm reset */
- #define CR_B9 (1 << 9) /* the mysterious "bit 9" */
- #define CR_ST (1 << 5) /* AC97 link start bit */
- #define CSAR_RD (1 << 19) /* AC97 data read bit */
- #define CSAR_WR (0)
- #define TSR_CMDAMT (1 << 31)
- #define TSR_CMDDMT (1 << 30)
- #define RSR_STARY (1 << 22)
- #define RSR_STDRY (1 << 21)
- #define ACR_DMARX16 (1 << 30)
- #define ACR_DMATX16 (1 << 29)
- #define ACR_TX12ATOM (1 << 26)
- #define ACR_DMARX20 ((1 << 24) | (1 << 22))
- #define ACR_DMATX20 ((1 << 23) | (1 << 21))
- #define CSDR_SHIFT 4
- #define CSDR_MASK (0xffff << CSDR_SHIFT)
- #define CSAR_SHIFT 12
- #define CSAR_MASK (0x7f << CSAR_SHIFT)
- #define AC97_WRITE_RETRY 1
- #define AC97_READ_RETRY 5
- /* manual-suggested AC97 codec access timeouts (us) */
- #define TMO_E1 500 /* 21 < E1 < 1000 */
- #define TMO_E2 13 /* 13 < E2 */
- #define TMO_E3 21 /* 21 < E3 */
- #define TMO_E4 500 /* 21 < E4 < 1000 */
- struct hac_priv {
- unsigned long mmio; /* HAC base address */
- } hac_cpu_data[] = {
- #if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE240000,
- },
- {
- .mmio = 0xFE250000,
- },
- #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE40000,
- },
- #else
- #error "Unsupported SuperH SoC"
- #endif
- };
- #define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
- /*
- * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
- */
- static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
- unsigned short *v)
- {
- unsigned int to1, to2, i;
- unsigned short adr;
- for (i = AC97_READ_RETRY; i; i--) {
- *v = 0;
- /* wait for HAC to receive something from the codec */
- for (to1 = TMO_E4;
- to1 && !(HACREG(HACRSR) & RSR_STARY);
- --to1)
- udelay(1);
- for (to2 = TMO_E4;
- to2 && !(HACREG(HACRSR) & RSR_STDRY);
- --to2)
- udelay(1);
- if (!to1 && !to2)
- return 0; /* codec comm is down */
- adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
- *v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
- if (r == adr)
- break;
- /* manual says: wait at least 21 usec before retrying */
- udelay(21);
- }
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
- return i;
- }
- static unsigned short hac_read_codec_aux(struct hac_priv *hac,
- unsigned short reg)
- {
- unsigned short val;
- unsigned int i, to;
- for (i = AC97_READ_RETRY; i; i--) {
- /* send_read_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDAMT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
- local_irq_enable();
- for (to = TMO_E3;
- to && !(HACREG(HACTSR) & TSR_CMDAMT);
- --to)
- udelay(1);
- HACREG(HACTSR) &= ~TSR_CMDAMT;
- val = 0;
- if (hac_get_codec_data(hac, reg, &val) != 0)
- break;
- }
- return i ? val : ~0;
- }
- static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
- {
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int i, to;
- /* write_codec_aux */
- for (i = AC97_WRITE_RETRY; i; i--) {
- /* send_write_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
- HACREG(HACCSDR) = (val << CSDR_SHIFT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
- local_irq_enable();
- /* poll-wait for CMDAMT and CMDDMT */
- for (to = TMO_E1;
- to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
- --to)
- udelay(1);
- HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
- if (to)
- break;
- /* timeout, try again */
- }
- }
- static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
- {
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- return hac_read_codec_aux(hac, reg);
- }
- static void hac_ac97_warmrst(struct snd_ac97 *ac97)
- {
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int tmo;
- HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
- msleep(10);
- HACREG(HACCR) = CR_ST | CR_B9;
- for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
- udelay(1);
- if (!tmo)
- printk(KERN_INFO "hac: reset: AC97 link down!\n");
- /* settings this bit lets us have a conversation with codec */
- HACREG(HACACR) |= ACR_TX12ATOM;
- }
- static void hac_ac97_coldrst(struct snd_ac97 *ac97)
- {
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac;
- hac = &hac_cpu_data[unit_id];
- HACREG(HACCR) = 0;
- HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
- msleep(10);
- hac_ac97_warmrst(ac97);
- }
- static struct snd_ac97_bus_ops hac_ac97_ops = {
- .read = hac_ac97_read,
- .write = hac_ac97_write,
- .reset = hac_ac97_coldrst,
- .warm_reset = hac_ac97_warmrst,
- };
- static int hac_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
- {
- struct hac_priv *hac = &hac_cpu_data[dai->id];
- int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
- switch (params->msbits) {
- case 16:
- HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
- HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
- break;
- case 20:
- HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
- HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
- break;
- default:
- pr_debug("hac: invalid depth %d bit\n", params->msbits);
- return -EINVAL;
- break;
- }
- return 0;
- }
- #define AC97_RATES \
- SNDRV_PCM_RATE_8000_192000
- #define AC97_FMTS \
- SNDRV_PCM_FMTBIT_S16_LE
- static const struct snd_soc_dai_ops hac_dai_ops = {
- .hw_params = hac_hw_params,
- };
- static struct snd_soc_dai_driver sh4_hac_dai[] = {
- {
- .name = "hac-dai.0",
- .bus_control = true,
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
- },
- #ifdef CONFIG_CPU_SUBTYPE_SH7760
- {
- .name = "hac-dai.1",
- .id = 1,
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
- },
- #endif
- };
- static const struct snd_soc_component_driver sh4_hac_component = {
- .name = "sh4-hac",
- };
- static int hac_soc_platform_probe(struct platform_device *pdev)
- {
- ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
- if (ret != 0)
- return ret;
- return snd_soc_register_component(&pdev->dev, &sh4_hac_component,
- sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
- }
- static int hac_soc_platform_remove(struct platform_device *pdev)
- {
- snd_soc_unregister_component(&pdev->dev);
- snd_soc_set_ac97_ops(NULL);
- return 0;
- }
- static struct platform_driver hac_pcm_driver = {
- .driver = {
- .name = "hac-pcm-audio",
- },
- .probe = hac_soc_platform_probe,
- .remove = hac_soc_platform_remove,
- };
- module_platform_driver(hac_pcm_driver);
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
- MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
|