zylonite.c 6.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276
  1. /*
  2. * zylonite.c -- SoC audio for Zylonite
  3. *
  4. * Copyright 2008 Wolfson Microelectronics PLC.
  5. * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License as
  9. * published by the Free Software Foundation; either version 2 of the
  10. * License, or (at your option) any later version.
  11. *
  12. */
  13. #include <linux/module.h>
  14. #include <linux/moduleparam.h>
  15. #include <linux/device.h>
  16. #include <linux/clk.h>
  17. #include <linux/i2c.h>
  18. #include <sound/core.h>
  19. #include <sound/pcm.h>
  20. #include <sound/pcm_params.h>
  21. #include <sound/soc.h>
  22. #include "../codecs/wm9713.h"
  23. #include "pxa2xx-ac97.h"
  24. #include "pxa-ssp.h"
  25. /*
  26. * There is a physical switch SW15 on the board which changes the MCLK
  27. * for the WM9713 between the standard AC97 master clock and the
  28. * output of the CLK_POUT signal from the PXA.
  29. */
  30. static int clk_pout;
  31. module_param(clk_pout, int, 0);
  32. MODULE_PARM_DESC(clk_pout, "Use CLK_POUT as WM9713 MCLK (SW15 on board).");
  33. static struct clk *pout;
  34. static struct snd_soc_card zylonite;
  35. static const struct snd_soc_dapm_widget zylonite_dapm_widgets[] = {
  36. SND_SOC_DAPM_HP("Headphone", NULL),
  37. SND_SOC_DAPM_MIC("Headset Microphone", NULL),
  38. SND_SOC_DAPM_MIC("Handset Microphone", NULL),
  39. SND_SOC_DAPM_SPK("Multiactor", NULL),
  40. SND_SOC_DAPM_SPK("Headset Earpiece", NULL),
  41. };
  42. /* Currently supported audio map */
  43. static const struct snd_soc_dapm_route audio_map[] = {
  44. /* Headphone output connected to HPL/HPR */
  45. { "Headphone", NULL, "HPL" },
  46. { "Headphone", NULL, "HPR" },
  47. /* On-board earpiece */
  48. { "Headset Earpiece", NULL, "OUT3" },
  49. /* Headphone mic */
  50. { "MIC2A", NULL, "Mic Bias" },
  51. { "Mic Bias", NULL, "Headset Microphone" },
  52. /* On-board mic */
  53. { "MIC1", NULL, "Mic Bias" },
  54. { "Mic Bias", NULL, "Handset Microphone" },
  55. /* Multiactor differentially connected over SPKL/SPKR */
  56. { "Multiactor", NULL, "SPKL" },
  57. { "Multiactor", NULL, "SPKR" },
  58. };
  59. static int zylonite_wm9713_init(struct snd_soc_pcm_runtime *rtd)
  60. {
  61. if (clk_pout)
  62. snd_soc_dai_set_pll(rtd->codec_dai, 0, 0,
  63. clk_get_rate(pout), 0);
  64. return 0;
  65. }
  66. static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
  67. struct snd_pcm_hw_params *params)
  68. {
  69. struct snd_soc_pcm_runtime *rtd = substream->private_data;
  70. struct snd_soc_dai *codec_dai = rtd->codec_dai;
  71. struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
  72. unsigned int pll_out = 0;
  73. unsigned int wm9713_div = 0;
  74. int ret = 0;
  75. int rate = params_rate(params);
  76. int width = snd_pcm_format_physical_width(params_format(params));
  77. /* Only support ratios that we can generate neatly from the AC97
  78. * based master clock - in particular, this excludes 44.1kHz.
  79. * In most applications the voice DAC will be used for telephony
  80. * data so multiples of 8kHz will be the common case.
  81. */
  82. switch (rate) {
  83. case 8000:
  84. wm9713_div = 12;
  85. break;
  86. case 16000:
  87. wm9713_div = 6;
  88. break;
  89. case 48000:
  90. wm9713_div = 2;
  91. break;
  92. default:
  93. /* Don't support OSS emulation */
  94. return -EINVAL;
  95. }
  96. /* Add 1 to the width for the leading clock cycle */
  97. pll_out = rate * (width + 1) * 8;
  98. ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_AUDIO, 0, 1);
  99. if (ret < 0)
  100. return ret;
  101. ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, pll_out);
  102. if (ret < 0)
  103. return ret;
  104. if (clk_pout)
  105. ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_PLL_DIV,
  106. WM9713_PCMDIV(wm9713_div));
  107. else
  108. ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV,
  109. WM9713_PCMDIV(wm9713_div));
  110. if (ret < 0)
  111. return ret;
  112. return 0;
  113. }
  114. static struct snd_soc_ops zylonite_voice_ops = {
  115. .hw_params = zylonite_voice_hw_params,
  116. };
  117. static struct snd_soc_dai_link zylonite_dai[] = {
  118. {
  119. .name = "AC97",
  120. .stream_name = "AC97 HiFi",
  121. .codec_name = "wm9713-codec",
  122. .platform_name = "pxa-pcm-audio",
  123. .cpu_dai_name = "pxa2xx-ac97",
  124. .codec_dai_name = "wm9713-hifi",
  125. .init = zylonite_wm9713_init,
  126. },
  127. {
  128. .name = "AC97 Aux",
  129. .stream_name = "AC97 Aux",
  130. .codec_name = "wm9713-codec",
  131. .platform_name = "pxa-pcm-audio",
  132. .cpu_dai_name = "pxa2xx-ac97-aux",
  133. .codec_dai_name = "wm9713-aux",
  134. },
  135. {
  136. .name = "WM9713 Voice",
  137. .stream_name = "WM9713 Voice",
  138. .codec_name = "wm9713-codec",
  139. .platform_name = "pxa-pcm-audio",
  140. .cpu_dai_name = "pxa-ssp-dai.2",
  141. .codec_dai_name = "wm9713-voice",
  142. .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
  143. SND_SOC_DAIFMT_CBS_CFS,
  144. .ops = &zylonite_voice_ops,
  145. },
  146. };
  147. static int zylonite_probe(struct snd_soc_card *card)
  148. {
  149. int ret;
  150. if (clk_pout) {
  151. pout = clk_get(NULL, "CLK_POUT");
  152. if (IS_ERR(pout)) {
  153. dev_err(card->dev, "Unable to obtain CLK_POUT: %ld\n",
  154. PTR_ERR(pout));
  155. return PTR_ERR(pout);
  156. }
  157. ret = clk_enable(pout);
  158. if (ret != 0) {
  159. dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
  160. ret);
  161. clk_put(pout);
  162. return ret;
  163. }
  164. dev_dbg(card->dev, "MCLK enabled at %luHz\n",
  165. clk_get_rate(pout));
  166. }
  167. return 0;
  168. }
  169. static int zylonite_remove(struct snd_soc_card *card)
  170. {
  171. if (clk_pout) {
  172. clk_disable(pout);
  173. clk_put(pout);
  174. }
  175. return 0;
  176. }
  177. static int zylonite_suspend_post(struct snd_soc_card *card)
  178. {
  179. if (clk_pout)
  180. clk_disable(pout);
  181. return 0;
  182. }
  183. static int zylonite_resume_pre(struct snd_soc_card *card)
  184. {
  185. int ret = 0;
  186. if (clk_pout) {
  187. ret = clk_enable(pout);
  188. if (ret != 0)
  189. dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
  190. ret);
  191. }
  192. return ret;
  193. }
  194. static struct snd_soc_card zylonite = {
  195. .name = "Zylonite",
  196. .owner = THIS_MODULE,
  197. .probe = &zylonite_probe,
  198. .remove = &zylonite_remove,
  199. .suspend_post = &zylonite_suspend_post,
  200. .resume_pre = &zylonite_resume_pre,
  201. .dai_link = zylonite_dai,
  202. .num_links = ARRAY_SIZE(zylonite_dai),
  203. .dapm_widgets = zylonite_dapm_widgets,
  204. .num_dapm_widgets = ARRAY_SIZE(zylonite_dapm_widgets),
  205. .dapm_routes = audio_map,
  206. .num_dapm_routes = ARRAY_SIZE(audio_map),
  207. };
  208. static struct platform_device *zylonite_snd_ac97_device;
  209. static int __init zylonite_init(void)
  210. {
  211. int ret;
  212. zylonite_snd_ac97_device = platform_device_alloc("soc-audio", -1);
  213. if (!zylonite_snd_ac97_device)
  214. return -ENOMEM;
  215. platform_set_drvdata(zylonite_snd_ac97_device, &zylonite);
  216. ret = platform_device_add(zylonite_snd_ac97_device);
  217. if (ret != 0)
  218. platform_device_put(zylonite_snd_ac97_device);
  219. return ret;
  220. }
  221. static void __exit zylonite_exit(void)
  222. {
  223. platform_device_unregister(zylonite_snd_ac97_device);
  224. }
  225. module_init(zylonite_init);
  226. module_exit(zylonite_exit);
  227. MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
  228. MODULE_DESCRIPTION("ALSA SoC WM9713 Zylonite");
  229. MODULE_LICENSE("GPL");