lantiq_soc.h 3.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109
  1. /*
  2. * This program is free software; you can redistribute it and/or modify it
  3. * under the terms of the GNU General Public License version 2 as published
  4. * by the Free Software Foundation.
  5. *
  6. * Copyright (C) 2010 John Crispin <john@phrozen.org>
  7. */
  8. #ifndef _LTQ_XWAY_H__
  9. #define _LTQ_XWAY_H__
  10. #ifdef CONFIG_SOC_TYPE_XWAY
  11. #include <lantiq.h>
  12. /* Chip IDs */
  13. #define SOC_ID_DANUBE1 0x129
  14. #define SOC_ID_DANUBE2 0x12B
  15. #define SOC_ID_TWINPASS 0x12D
  16. #define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */
  17. #define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */
  18. #define SOC_ID_ARX188 0x16C
  19. #define SOC_ID_ARX168_1 0x16D
  20. #define SOC_ID_ARX168_2 0x16E
  21. #define SOC_ID_ARX182 0x16F
  22. #define SOC_ID_GRX188 0x170
  23. #define SOC_ID_GRX168 0x171
  24. #define SOC_ID_VRX288 0x1C0 /* v1.1 */
  25. #define SOC_ID_VRX282 0x1C1 /* v1.1 */
  26. #define SOC_ID_VRX268 0x1C2 /* v1.1 */
  27. #define SOC_ID_GRX268 0x1C8 /* v1.1 */
  28. #define SOC_ID_GRX288 0x1C9 /* v1.1 */
  29. #define SOC_ID_VRX288_2 0x00B /* v1.2 */
  30. #define SOC_ID_VRX268_2 0x00C /* v1.2 */
  31. #define SOC_ID_GRX288_2 0x00D /* v1.2 */
  32. #define SOC_ID_GRX282_2 0x00E /* v1.2 */
  33. #define SOC_ID_VRX220 0x000
  34. #define SOC_ID_ARX362 0x004
  35. #define SOC_ID_ARX368 0x005
  36. #define SOC_ID_ARX382 0x007
  37. #define SOC_ID_ARX388 0x008
  38. #define SOC_ID_URX388 0x009
  39. #define SOC_ID_GRX383 0x010
  40. #define SOC_ID_GRX369 0x011
  41. #define SOC_ID_GRX387 0x00F
  42. #define SOC_ID_GRX389 0x012
  43. /* SoC Types */
  44. #define SOC_TYPE_DANUBE 0x01
  45. #define SOC_TYPE_TWINPASS 0x02
  46. #define SOC_TYPE_AR9 0x03
  47. #define SOC_TYPE_VR9 0x04 /* v1.1 */
  48. #define SOC_TYPE_VR9_2 0x05 /* v1.2 */
  49. #define SOC_TYPE_AMAZON_SE 0x06
  50. #define SOC_TYPE_AR10 0x07
  51. #define SOC_TYPE_GRX390 0x08
  52. #define SOC_TYPE_VRX220 0x09
  53. /* BOOT_SEL - find what boot media we have */
  54. #define BS_EXT_ROM 0x0
  55. #define BS_FLASH 0x1
  56. #define BS_MII0 0x2
  57. #define BS_PCI 0x3
  58. #define BS_UART1 0x4
  59. #define BS_SPI 0x5
  60. #define BS_NAND 0x6
  61. #define BS_RMII0 0x7
  62. /* helpers used to access the cgu */
  63. #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
  64. #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
  65. extern __iomem void *ltq_cgu_membase;
  66. /*
  67. * during early_printk no ioremap is possible
  68. * let's use KSEG1 instead
  69. */
  70. #define LTQ_ASC1_BASE_ADDR 0x1E100C00
  71. #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
  72. /* EBU - external bus unit */
  73. #define LTQ_EBU_BUSCON0 0x0060
  74. #define LTQ_EBU_PCC_CON 0x0090
  75. #define LTQ_EBU_PCC_IEN 0x00A4
  76. #define LTQ_EBU_PCC_ISTAT 0x00A0
  77. #define LTQ_EBU_BUSCON1 0x0064
  78. #define LTQ_EBU_ADDRSEL1 0x0024
  79. #define EBU_WRDIS 0x80000000
  80. /* WDT */
  81. #define LTQ_RST_CAUSE_WDTRST 0x20
  82. /* MPS - multi processor unit (voice) */
  83. #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
  84. #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
  85. /* allow booting xrx200 phys */
  86. int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
  87. /* request a non-gpio and set the PIO config */
  88. #define PMU_PPE BIT(13)
  89. extern void ltq_pmu_enable(unsigned int module);
  90. extern void ltq_pmu_disable(unsigned int module);
  91. #endif /* CONFIG_SOC_TYPE_XWAY */
  92. #endif /* _LTQ_XWAY_H__ */