123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101 |
- /*
- * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #define pr_fmt(fmt) "%s: " fmt, __func__
- #include <linux/kernel.h>
- #include <linux/platform_device.h>
- #include <linux/gpio.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/smsc911x.h>
- #include "gpmc.h"
- #include "gpmc-smsc911x.h"
- static struct resource gpmc_smsc911x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
- };
- static struct smsc911x_platform_config gpmc_smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- };
- /*
- * Initialize smsc911x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
- void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
- {
- struct platform_device *pdev;
- unsigned long cs_mem_base;
- int ret;
- if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
- pr_err("Failed to request GPMC mem region\n");
- return;
- }
- gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
- gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
- if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
- pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
- goto free1;
- }
- gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
- if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
- ret = gpio_request_one(gpmc_cfg->gpio_reset,
- GPIOF_OUT_INIT_HIGH, "smsc911x reset");
- if (ret) {
- pr_err("Failed to request reset GPIO%d\n",
- gpmc_cfg->gpio_reset);
- goto free2;
- }
- gpio_set_value(gpmc_cfg->gpio_reset, 0);
- msleep(100);
- gpio_set_value(gpmc_cfg->gpio_reset, 1);
- }
- gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
- pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
- gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
- &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
- if (IS_ERR(pdev)) {
- pr_err("Unable to register platform device\n");
- gpio_free(gpmc_cfg->gpio_reset);
- goto free2;
- }
- return;
- free2:
- gpio_free(gpmc_cfg->gpio_irq);
- free1:
- gpmc_cs_free(gpmc_cfg->cs);
- pr_err("Could not initialize smsc911x device\n");
- }
|