dc21285.c 8.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377
  1. /*
  2. * linux/arch/arm/kernel/dec21285.c: PCI functions for DC21285
  3. *
  4. * Copyright (C) 1998-2001 Russell King
  5. * Copyright (C) 1998-2000 Phil Blundell
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License version 2 as
  9. * published by the Free Software Foundation.
  10. */
  11. #include <linux/kernel.h>
  12. #include <linux/pci.h>
  13. #include <linux/interrupt.h>
  14. #include <linux/mm.h>
  15. #include <linux/slab.h>
  16. #include <linux/init.h>
  17. #include <linux/ioport.h>
  18. #include <linux/irq.h>
  19. #include <linux/io.h>
  20. #include <linux/spinlock.h>
  21. #include <asm/irq.h>
  22. #include <asm/mach/pci.h>
  23. #include <asm/hardware/dec21285.h>
  24. #define MAX_SLOTS 21
  25. #define PCICMD_ABORT ((PCI_STATUS_REC_MASTER_ABORT| \
  26. PCI_STATUS_REC_TARGET_ABORT)<<16)
  27. #define PCICMD_ERROR_BITS ((PCI_STATUS_DETECTED_PARITY | \
  28. PCI_STATUS_REC_MASTER_ABORT | \
  29. PCI_STATUS_REC_TARGET_ABORT | \
  30. PCI_STATUS_PARITY) << 16)
  31. extern int setup_arm_irq(int, struct irqaction *);
  32. extern void pcibios_report_status(u_int status_mask, int warn);
  33. static unsigned long
  34. dc21285_base_address(struct pci_bus *bus, unsigned int devfn)
  35. {
  36. unsigned long addr = 0;
  37. if (bus->number == 0) {
  38. if (PCI_SLOT(devfn) == 0)
  39. /*
  40. * For devfn 0, point at the 21285
  41. */
  42. addr = ARMCSR_BASE;
  43. else {
  44. devfn -= 1 << 3;
  45. if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
  46. addr = PCICFG0_BASE | 0xc00000 | (devfn << 8);
  47. }
  48. } else
  49. addr = PCICFG1_BASE | (bus->number << 16) | (devfn << 8);
  50. return addr;
  51. }
  52. static int
  53. dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
  54. int size, u32 *value)
  55. {
  56. unsigned long addr = dc21285_base_address(bus, devfn);
  57. u32 v = 0xffffffff;
  58. if (addr)
  59. switch (size) {
  60. case 1:
  61. asm("ldrb %0, [%1, %2]"
  62. : "=r" (v) : "r" (addr), "r" (where) : "cc");
  63. break;
  64. case 2:
  65. asm("ldrh %0, [%1, %2]"
  66. : "=r" (v) : "r" (addr), "r" (where) : "cc");
  67. break;
  68. case 4:
  69. asm("ldr %0, [%1, %2]"
  70. : "=r" (v) : "r" (addr), "r" (where) : "cc");
  71. break;
  72. }
  73. *value = v;
  74. v = *CSR_PCICMD;
  75. if (v & PCICMD_ABORT) {
  76. *CSR_PCICMD = v & (0xffff|PCICMD_ABORT);
  77. return -1;
  78. }
  79. return PCIBIOS_SUCCESSFUL;
  80. }
  81. static int
  82. dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
  83. int size, u32 value)
  84. {
  85. unsigned long addr = dc21285_base_address(bus, devfn);
  86. u32 v;
  87. if (addr)
  88. switch (size) {
  89. case 1:
  90. asm("strb %0, [%1, %2]"
  91. : : "r" (value), "r" (addr), "r" (where)
  92. : "cc");
  93. break;
  94. case 2:
  95. asm("strh %0, [%1, %2]"
  96. : : "r" (value), "r" (addr), "r" (where)
  97. : "cc");
  98. break;
  99. case 4:
  100. asm("str %0, [%1, %2]"
  101. : : "r" (value), "r" (addr), "r" (where)
  102. : "cc");
  103. break;
  104. }
  105. v = *CSR_PCICMD;
  106. if (v & PCICMD_ABORT) {
  107. *CSR_PCICMD = v & (0xffff|PCICMD_ABORT);
  108. return -1;
  109. }
  110. return PCIBIOS_SUCCESSFUL;
  111. }
  112. struct pci_ops dc21285_ops = {
  113. .read = dc21285_read_config,
  114. .write = dc21285_write_config,
  115. };
  116. static struct timer_list serr_timer;
  117. static struct timer_list perr_timer;
  118. static void dc21285_enable_error(unsigned long __data)
  119. {
  120. switch (__data) {
  121. case IRQ_PCI_SERR:
  122. del_timer(&serr_timer);
  123. break;
  124. case IRQ_PCI_PERR:
  125. del_timer(&perr_timer);
  126. break;
  127. }
  128. enable_irq(__data);
  129. }
  130. /*
  131. * Warn on PCI errors.
  132. */
  133. static irqreturn_t dc21285_abort_irq(int irq, void *dev_id)
  134. {
  135. unsigned int cmd;
  136. unsigned int status;
  137. cmd = *CSR_PCICMD;
  138. status = cmd >> 16;
  139. cmd = cmd & 0xffff;
  140. if (status & PCI_STATUS_REC_MASTER_ABORT) {
  141. printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n",
  142. instruction_pointer(get_irq_regs()));
  143. cmd |= PCI_STATUS_REC_MASTER_ABORT << 16;
  144. }
  145. if (status & PCI_STATUS_REC_TARGET_ABORT) {
  146. printk(KERN_DEBUG "PCI: target abort: ");
  147. pcibios_report_status(PCI_STATUS_REC_MASTER_ABORT |
  148. PCI_STATUS_SIG_TARGET_ABORT |
  149. PCI_STATUS_REC_TARGET_ABORT, 1);
  150. printk("\n");
  151. cmd |= PCI_STATUS_REC_TARGET_ABORT << 16;
  152. }
  153. *CSR_PCICMD = cmd;
  154. return IRQ_HANDLED;
  155. }
  156. static irqreturn_t dc21285_serr_irq(int irq, void *dev_id)
  157. {
  158. struct timer_list *timer = dev_id;
  159. unsigned int cntl;
  160. printk(KERN_DEBUG "PCI: system error received: ");
  161. pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
  162. printk("\n");
  163. cntl = *CSR_SA110_CNTL & 0xffffdf07;
  164. *CSR_SA110_CNTL = cntl | SA110_CNTL_RXSERR;
  165. /*
  166. * back off this interrupt
  167. */
  168. disable_irq(irq);
  169. timer->expires = jiffies + HZ;
  170. add_timer(timer);
  171. return IRQ_HANDLED;
  172. }
  173. static irqreturn_t dc21285_discard_irq(int irq, void *dev_id)
  174. {
  175. printk(KERN_DEBUG "PCI: discard timer expired\n");
  176. *CSR_SA110_CNTL &= 0xffffde07;
  177. return IRQ_HANDLED;
  178. }
  179. static irqreturn_t dc21285_dparity_irq(int irq, void *dev_id)
  180. {
  181. unsigned int cmd;
  182. printk(KERN_DEBUG "PCI: data parity error detected: ");
  183. pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1);
  184. printk("\n");
  185. cmd = *CSR_PCICMD & 0xffff;
  186. *CSR_PCICMD = cmd | 1 << 24;
  187. return IRQ_HANDLED;
  188. }
  189. static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
  190. {
  191. struct timer_list *timer = dev_id;
  192. unsigned int cmd;
  193. printk(KERN_DEBUG "PCI: parity error detected: ");
  194. pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1);
  195. printk("\n");
  196. cmd = *CSR_PCICMD & 0xffff;
  197. *CSR_PCICMD = cmd | 1 << 31;
  198. /*
  199. * back off this interrupt
  200. */
  201. disable_irq(irq);
  202. timer->expires = jiffies + HZ;
  203. add_timer(timer);
  204. return IRQ_HANDLED;
  205. }
  206. int __init dc21285_setup(int nr, struct pci_sys_data *sys)
  207. {
  208. struct resource *res;
  209. if (nr || !footbridge_cfn_mode())
  210. return 0;
  211. res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
  212. if (!res) {
  213. printk("out of memory for root bus resources");
  214. return 0;
  215. }
  216. res[0].flags = IORESOURCE_MEM;
  217. res[0].name = "Footbridge non-prefetch";
  218. res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
  219. res[1].name = "Footbridge prefetch";
  220. allocate_resource(&iomem_resource, &res[1], 0x20000000,
  221. 0xa0000000, 0xffffffff, 0x20000000, NULL, NULL);
  222. allocate_resource(&iomem_resource, &res[0], 0x40000000,
  223. 0x80000000, 0xffffffff, 0x40000000, NULL, NULL);
  224. sys->mem_offset = DC21285_PCI_MEM;
  225. pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
  226. pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
  227. return 1;
  228. }
  229. #define dc21285_request_irq(_a, _b, _c, _d, _e) \
  230. WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0)
  231. void __init dc21285_preinit(void)
  232. {
  233. unsigned int mem_size, mem_mask;
  234. int cfn_mode;
  235. pcibios_min_mem = 0x81000000;
  236. mem_size = (unsigned int)high_memory - PAGE_OFFSET;
  237. for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
  238. if (mem_mask >= mem_size)
  239. break;
  240. /*
  241. * These registers need to be set up whether we're the
  242. * central function or not.
  243. */
  244. *CSR_SDRAMBASEMASK = (mem_mask - 1) & 0x0ffc0000;
  245. *CSR_SDRAMBASEOFFSET = 0;
  246. *CSR_ROMBASEMASK = 0x80000000;
  247. *CSR_CSRBASEMASK = 0;
  248. *CSR_CSRBASEOFFSET = 0;
  249. *CSR_PCIADDR_EXTN = 0;
  250. cfn_mode = __footbridge_cfn_mode();
  251. printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
  252. "%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ?
  253. "central function" : "addin");
  254. if (footbridge_cfn_mode()) {
  255. /*
  256. * Clear any existing errors - we aren't
  257. * interested in historical data...
  258. */
  259. *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) |
  260. SA110_CNTL_RXSERR;
  261. *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
  262. }
  263. init_timer(&serr_timer);
  264. init_timer(&perr_timer);
  265. serr_timer.data = IRQ_PCI_SERR;
  266. serr_timer.function = dc21285_enable_error;
  267. perr_timer.data = IRQ_PCI_PERR;
  268. perr_timer.function = dc21285_enable_error;
  269. /*
  270. * We don't care if these fail.
  271. */
  272. dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, 0,
  273. "PCI system error", &serr_timer);
  274. dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, 0,
  275. "PCI parity error", &perr_timer);
  276. dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, 0,
  277. "PCI abort", NULL);
  278. dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, 0,
  279. "Discard timer", NULL);
  280. dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0,
  281. "PCI data parity", NULL);
  282. if (cfn_mode) {
  283. /*
  284. * Map our SDRAM at a known address in PCI space, just in case
  285. * the firmware had other ideas. Using a nonzero base is
  286. * necessary, since some VGA cards forcefully use PCI addresses
  287. * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
  288. */
  289. *CSR_PCICSRBASE = 0xf4000000;
  290. *CSR_PCICSRIOBASE = 0;
  291. *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET);
  292. *CSR_PCIROMBASE = 0;
  293. *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
  294. PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
  295. } else if (footbridge_cfn_mode() != 0) {
  296. /*
  297. * If we are not compiled to accept "add-in" mode, then
  298. * we are using a constant virt_to_bus translation which
  299. * can not hope to cater for the way the host BIOS has
  300. * set up the machine.
  301. */
  302. panic("PCI: this kernel is compiled for central "
  303. "function mode only");
  304. }
  305. }
  306. void __init dc21285_postinit(void)
  307. {
  308. register_isa_ports(DC21285_PCI_MEM, DC21285_PCI_IO, 0);
  309. }