123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268 |
- /*
- * linux/arch/arm/kernel/devtree.c
- *
- * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/init.h>
- #include <linux/export.h>
- #include <linux/errno.h>
- #include <linux/types.h>
- #include <linux/bootmem.h>
- #include <linux/memblock.h>
- #include <linux/of.h>
- #include <linux/of_fdt.h>
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/smp.h>
- #include <asm/cputype.h>
- #include <asm/setup.h>
- #include <asm/page.h>
- #include <asm/prom.h>
- #include <asm/smp_plat.h>
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
- #ifdef CONFIG_SMP
- extern struct of_cpu_method __cpu_method_of_table[];
- static const struct of_cpu_method __cpu_method_of_table_sentinel
- __used __section(__cpu_method_of_table_end);
- static int __init set_smp_ops_by_method(struct device_node *node)
- {
- const char *method;
- struct of_cpu_method *m = __cpu_method_of_table;
- if (of_property_read_string(node, "enable-method", &method))
- return 0;
- for (; m->method; m++)
- if (!strcmp(m->method, method)) {
- smp_set_ops(m->ops);
- return 1;
- }
- return 0;
- }
- #else
- static inline int set_smp_ops_by_method(struct device_node *node)
- {
- return 1;
- }
- #endif
- /*
- * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree
- * and builds the cpu logical map array containing MPIDR values related to
- * logical cpus
- *
- * Updates the cpu possible mask with the number of parsed cpu nodes
- */
- void __init arm_dt_init_cpu_maps(void)
- {
- /*
- * Temp logical map is initialized with UINT_MAX values that are
- * considered invalid logical map entries since the logical map must
- * contain a list of MPIDR[23:0] values where MPIDR[31:24] must
- * read as 0.
- */
- struct device_node *cpu, *cpus;
- int found_method = 0;
- u32 i, j, cpuidx = 1;
- u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
- u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
- bool bootcpu_valid = false;
- cpus = of_find_node_by_path("/cpus");
- if (!cpus)
- return;
- for_each_child_of_node(cpus, cpu) {
- const __be32 *cell;
- int prop_bytes;
- u32 hwid;
- if (of_node_cmp(cpu->type, "cpu"))
- continue;
- pr_debug(" * %s...\n", cpu->full_name);
- /*
- * A device tree containing CPU nodes with missing "reg"
- * properties is considered invalid to build the
- * cpu_logical_map.
- */
- cell = of_get_property(cpu, "reg", &prop_bytes);
- if (!cell || prop_bytes < sizeof(*cell)) {
- pr_debug(" * %s missing reg property\n",
- cpu->full_name);
- of_node_put(cpu);
- return;
- }
- /*
- * Bits n:24 must be set to 0 in the DT since the reg property
- * defines the MPIDR[23:0].
- */
- do {
- hwid = be32_to_cpu(*cell++);
- prop_bytes -= sizeof(*cell);
- } while (!hwid && prop_bytes > 0);
- if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
- of_node_put(cpu);
- return;
- }
- /*
- * Duplicate MPIDRs are a recipe for disaster.
- * Scan all initialized entries and check for
- * duplicates. If any is found just bail out.
- * temp values were initialized to UINT_MAX
- * to avoid matching valid MPIDR[23:0] values.
- */
- for (j = 0; j < cpuidx; j++)
- if (WARN(tmp_map[j] == hwid,
- "Duplicate /cpu reg properties in the DT\n")) {
- of_node_put(cpu);
- return;
- }
- /*
- * Build a stashed array of MPIDR values. Numbering scheme
- * requires that if detected the boot CPU must be assigned
- * logical id 0. Other CPUs get sequential indexes starting
- * from 1. If a CPU node with a reg property matching the
- * boot CPU MPIDR is detected, this is recorded so that the
- * logical map built from DT is validated and can be used
- * to override the map created in smp_setup_processor_id().
- */
- if (hwid == mpidr) {
- i = 0;
- bootcpu_valid = true;
- } else {
- i = cpuidx++;
- }
- if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than "
- "max cores %u, capping them\n",
- cpuidx, nr_cpu_ids)) {
- cpuidx = nr_cpu_ids;
- of_node_put(cpu);
- break;
- }
- tmp_map[i] = hwid;
- if (!found_method)
- found_method = set_smp_ops_by_method(cpu);
- }
- /*
- * Fallback to an enable-method in the cpus node if nothing found in
- * a cpu node.
- */
- if (!found_method)
- set_smp_ops_by_method(cpus);
- if (!bootcpu_valid) {
- pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
- return;
- }
- /*
- * Since the boot CPU node contains proper data, and all nodes have
- * a reg property, the DT CPU list can be considered valid and the
- * logical map created in smp_setup_processor_id() can be overridden
- */
- for (i = 0; i < cpuidx; i++) {
- set_cpu_possible(i, true);
- cpu_logical_map(i) = tmp_map[i];
- pr_debug("cpu logical map 0x%x\n", cpu_logical_map(i));
- }
- }
- bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
- {
- return phys_id == cpu_logical_map(cpu);
- }
- static const void * __init arch_get_next_mach(const char *const **match)
- {
- static const struct machine_desc *mdesc = __arch_info_begin;
- const struct machine_desc *m = mdesc;
- if (m >= __arch_info_end)
- return NULL;
- mdesc++;
- *match = m->dt_compat;
- return m;
- }
- /**
- * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
- *
- * If a dtb was passed to the kernel in r2, then use it to choose the
- * correct machine_desc and to setup the system.
- */
- const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
- {
- const struct machine_desc *mdesc, *mdesc_best = NULL;
- #if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
- DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
- .l2c_aux_val = 0x0,
- .l2c_aux_mask = ~0x0,
- MACHINE_END
- mdesc_best = &__mach_desc_GENERIC_DT;
- #endif
- if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
- return NULL;
- mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
- if (!mdesc) {
- const char *prop;
- int size;
- unsigned long dt_root;
- early_print("\nError: unrecognized/unsupported "
- "device tree compatible list:\n[ ");
- dt_root = of_get_flat_dt_root();
- prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
- while (size > 0) {
- early_print("'%s' ", prop);
- size -= strlen(prop) + 1;
- prop += strlen(prop) + 1;
- }
- early_print("]\n\n");
- dump_machine_table(); /* does not return */
- }
- /* We really don't want to do this, but sometimes firmware provides buggy data */
- if (mdesc->dt_fixup)
- mdesc->dt_fixup();
- early_init_dt_scan_nodes();
- /* Change machine number to match the mdesc we're using */
- __machine_arch_type = mdesc->nr;
- return mdesc;
- }
|