1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677 |
- /*
- * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
- * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include "omap3-igep0030-common.dtsi"
- / {
- model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
- compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
- /* Regulator to trigger the WL_EN signal of the Wifi module */
- lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbep5clwmc-wlen";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
- enable-active-high;
- };
- };
- &omap3_pmx_core {
- lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */
- OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
- OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
- >;
- };
- leds_pins: pinmux_leds_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
- >;
- };
- };
- &i2c2 {
- status = "disabled";
- };
- &leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins &leds_core2_pins>;
- boot {
- label = "omap3:green:boot";
- gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
- &mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
- vmmc-supply = <&lbep5clwmc_wlen>;
- bus-width = <4>;
- non-removable;
- #address-cells = <1>;
- #size-cells = <0>;
- wlcore: wlcore@2 {
- compatible = "ti,wl1835";
- reg = <2>;
- interrupt-parent = <&gpio5>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
- };
- };
|