123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203 |
- /*
- * soundbus generic definitions
- *
- * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- *
- * GPL v2, can be found in COPYING.
- */
- #ifndef __SOUNDBUS_H
- #define __SOUNDBUS_H
- #include <linux/of_device.h>
- #include <sound/pcm.h>
- #include <linux/list.h>
- /* When switching from master to slave or the other way around,
- * you don't want to have the codec chip acting as clock source
- * while the bus still is.
- * More importantly, while switch from slave to master, you need
- * to turn off the chip's master function first, but then there's
- * no clock for a while and other chips might reset, so we notify
- * their drivers after having switched.
- * The constants here are codec-point of view, so when we switch
- * the soundbus to master we tell the codec we're going to switch
- * and give it CLOCK_SWITCH_PREPARE_SLAVE!
- */
- enum clock_switch {
- CLOCK_SWITCH_PREPARE_SLAVE,
- CLOCK_SWITCH_PREPARE_MASTER,
- CLOCK_SWITCH_SLAVE,
- CLOCK_SWITCH_MASTER,
- CLOCK_SWITCH_NOTIFY,
- };
- /* information on a transfer the codec can take */
- struct transfer_info {
- u64 formats; /* SNDRV_PCM_FMTBIT_* */
- unsigned int rates; /* SNDRV_PCM_RATE_* */
- /* flags */
- u32 transfer_in:1, /* input = 1, output = 0 */
- must_be_clock_source:1;
- /* for codecs to distinguish among their TIs */
- int tag;
- };
- struct codec_info_item {
- struct codec_info *codec;
- void *codec_data;
- struct soundbus_dev *sdev;
- /* internal, to be used by the soundbus provider */
- struct list_head list;
- };
- /* for prepare, where the codecs need to know
- * what we're going to drive the bus with */
- struct bus_info {
- /* see below */
- int sysclock_factor;
- int bus_factor;
- };
- /* information on the codec itself, plus function pointers */
- struct codec_info {
- /* the module this lives in */
- struct module *owner;
- /* supported transfer possibilities, array terminated by
- * formats or rates being 0. */
- struct transfer_info *transfers;
- /* Master clock speed factor
- * to be used (master clock speed = sysclock_factor * sampling freq)
- * Unused if the soundbus provider has no such notion.
- */
- int sysclock_factor;
- /* Bus factor, bus clock speed = bus_factor * sampling freq)
- * Unused if the soundbus provider has no such notion.
- */
- int bus_factor;
- /* operations */
- /* clock switching, see above */
- int (*switch_clock)(struct codec_info_item *cii,
- enum clock_switch clock);
- /* called for each transfer_info when the user
- * opens the pcm device to determine what the
- * hardware can support at this point in time.
- * That can depend on other user-switchable controls.
- * Return 1 if usable, 0 if not.
- * out points to another instance of a transfer_info
- * which is initialised to the values in *ti, and
- * it's format and rate values can be modified by
- * the callback if it is necessary to further restrict
- * the formats that can be used at the moment, for
- * example when one codec has multiple logical codec
- * info structs for multiple inputs.
- */
- int (*usable)(struct codec_info_item *cii,
- struct transfer_info *ti,
- struct transfer_info *out);
- /* called when pcm stream is opened, probably not implemented
- * most of the time since it isn't too useful */
- int (*open)(struct codec_info_item *cii,
- struct snd_pcm_substream *substream);
- /* called when the pcm stream is closed, at this point
- * the user choices can all be unlocked (see below) */
- int (*close)(struct codec_info_item *cii,
- struct snd_pcm_substream *substream);
- /* if the codec must forbid some user choices because
- * they are not valid with the substream/transfer info,
- * it must do so here. Example: no digital output for
- * incompatible framerate, say 8KHz, on Onyx.
- * If the selected stuff in the substream is NOT
- * compatible, you have to reject this call! */
- int (*prepare)(struct codec_info_item *cii,
- struct bus_info *bi,
- struct snd_pcm_substream *substream);
- /* start() is called before data is pushed to the codec.
- * Note that start() must be atomic! */
- int (*start)(struct codec_info_item *cii,
- struct snd_pcm_substream *substream);
- /* stop() is called after data is no longer pushed to the codec.
- * Note that stop() must be atomic! */
- int (*stop)(struct codec_info_item *cii,
- struct snd_pcm_substream *substream);
- int (*suspend)(struct codec_info_item *cii, pm_message_t state);
- int (*resume)(struct codec_info_item *cii);
- };
- /* information on a soundbus device */
- struct soundbus_dev {
- /* the bus it belongs to */
- struct list_head onbuslist;
- /* the of device it represents */
- struct platform_device ofdev;
- /* what modules go by */
- char modalias[32];
- /* These fields must be before attach_codec can be called.
- * They should be set by the owner of the alsa card object
- * that is needed, and whoever sets them must make sure
- * that they are unique within that alsa card object. */
- char *pcmname;
- int pcmid;
- /* this is assigned by the soundbus provider in attach_codec */
- struct snd_pcm *pcm;
- /* operations */
- /* attach a codec to this soundbus, give the alsa
- * card object the PCMs for this soundbus should be in.
- * The 'data' pointer must be unique, it is used as the
- * key for detach_codec(). */
- int (*attach_codec)(struct soundbus_dev *dev, struct snd_card *card,
- struct codec_info *ci, void *data);
- void (*detach_codec)(struct soundbus_dev *dev, void *data);
- /* TODO: suspend/resume */
- /* private for the soundbus provider */
- struct list_head codec_list;
- u32 have_out:1, have_in:1;
- };
- #define to_soundbus_device(d) container_of(d, struct soundbus_dev, ofdev.dev)
- #define of_to_soundbus_device(d) container_of(d, struct soundbus_dev, ofdev)
- extern int soundbus_add_one(struct soundbus_dev *dev);
- extern void soundbus_remove_one(struct soundbus_dev *dev);
- extern struct soundbus_dev *soundbus_dev_get(struct soundbus_dev *dev);
- extern void soundbus_dev_put(struct soundbus_dev *dev);
- struct soundbus_driver {
- char *name;
- struct module *owner;
- /* we don't implement any matching at all */
- int (*probe)(struct soundbus_dev* dev);
- int (*remove)(struct soundbus_dev* dev);
- int (*shutdown)(struct soundbus_dev* dev);
- struct device_driver driver;
- };
- #define to_soundbus_driver(drv) container_of(drv,struct soundbus_driver, driver)
- extern int soundbus_register_driver(struct soundbus_driver *drv);
- extern void soundbus_unregister_driver(struct soundbus_driver *drv);
- extern struct attribute *soundbus_dev_attrs[];
- #endif /* __SOUNDBUS_H */
|