at91sam9_ddrsdr.h 6.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128
  1. /*
  2. * Header file for the Atmel DDR/SDR SDRAM Controller
  3. *
  4. * Copyright (C) 2010 Atmel Corporation
  5. * Nicolas Ferre <nicolas.ferre@atmel.com>
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License as published by
  9. * the Free Software Foundation; either version 2 of the License, or
  10. * (at your option) any later version.
  11. */
  12. #ifndef AT91SAM9_DDRSDR_H
  13. #define AT91SAM9_DDRSDR_H
  14. #define AT91_DDRSDRC_MR 0x00 /* Mode Register */
  15. #define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */
  16. #define AT91_DDRSDRC_MODE_NORMAL 0
  17. #define AT91_DDRSDRC_MODE_NOP 1
  18. #define AT91_DDRSDRC_MODE_PRECHARGE 2
  19. #define AT91_DDRSDRC_MODE_LMR 3
  20. #define AT91_DDRSDRC_MODE_REFRESH 4
  21. #define AT91_DDRSDRC_MODE_EXT_LMR 5
  22. #define AT91_DDRSDRC_MODE_DEEP 6
  23. #define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
  24. #define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
  25. #define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
  26. #define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
  27. #define AT91_DDRSDRC_NC_SDR8 (0 << 0)
  28. #define AT91_DDRSDRC_NC_SDR9 (1 << 0)
  29. #define AT91_DDRSDRC_NC_SDR10 (2 << 0)
  30. #define AT91_DDRSDRC_NC_SDR11 (3 << 0)
  31. #define AT91_DDRSDRC_NC_DDR9 (0 << 0)
  32. #define AT91_DDRSDRC_NC_DDR10 (1 << 0)
  33. #define AT91_DDRSDRC_NC_DDR11 (2 << 0)
  34. #define AT91_DDRSDRC_NC_DDR12 (3 << 0)
  35. #define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
  36. #define AT91_DDRSDRC_NR_11 (0 << 2)
  37. #define AT91_DDRSDRC_NR_12 (1 << 2)
  38. #define AT91_DDRSDRC_NR_13 (2 << 2)
  39. #define AT91_DDRSDRC_NR_14 (3 << 2)
  40. #define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
  41. #define AT91_DDRSDRC_CAS_2 (2 << 4)
  42. #define AT91_DDRSDRC_CAS_3 (3 << 4)
  43. #define AT91_DDRSDRC_CAS_25 (6 << 4)
  44. #define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */
  45. #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
  46. #define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */
  47. #define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */
  48. #define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */
  49. #define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
  50. #define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
  51. #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
  52. #define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
  53. #define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
  54. #define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
  55. #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
  56. #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
  57. #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
  58. #define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
  59. #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
  60. #define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
  61. #define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
  62. #define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
  63. #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
  64. #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
  65. #define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */
  66. #define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */
  67. #define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */
  68. #define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */
  69. #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
  70. #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
  71. #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
  72. #define AT91_DDRSDRC_LPCB_DISABLE 0
  73. #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
  74. #define AT91_DDRSDRC_LPCB_POWER_DOWN 2
  75. #define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
  76. #define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
  77. #define AT91_DDRSDRC_LPDDR2_PWOFF (1 << 3) /* LPDDR Power Off */
  78. #define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
  79. #define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
  80. #define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
  81. #define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
  82. #define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
  83. #define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
  84. #define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
  85. #define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */
  86. #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
  87. #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
  88. #define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */
  89. #define AT91_DDRSDRC_MD_SDR 0
  90. #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
  91. #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
  92. #define AT91_DDRSDRC_MD_LPDDR3 5
  93. #define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
  94. #define AT91_DDRSDRC_MD_LPDDR2 7
  95. #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
  96. #define AT91_DDRSDRC_DBW_32BITS (0 << 4)
  97. #define AT91_DDRSDRC_DBW_16BITS (1 << 4)
  98. #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
  99. #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
  100. #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
  101. #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
  102. #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
  103. #define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
  104. #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
  105. #define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */
  106. #define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */
  107. #define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */
  108. #define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */
  109. #define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */
  110. #define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */
  111. #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
  112. #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
  113. #endif