123456789101112131415161718192021222324252627282930313233343536373839 |
- * BROADCOM BRCMSTB/BMIPS SDHCI Controller
- This file documents differences between the core properties in mmc.txt
- and the properties used by the sdhci-brcmstb driver.
- NOTE: The driver disables all UHS speed modes by default and depends
- on Device Tree properties to enable them for SoC/Board combinations
- that support them.
- Required properties:
- - compatible: should be one of the following
- - "brcm,bcm7425-sdhci"
- - "brcm,bcm7445-sdhci"
- Refer to clocks/clock-bindings.txt for generic clock consumer properties.
- Example:
- sdhci@f03e0100 {
- compatible = "brcm,bcm7425-sdhci";
- reg = <0xf03e0000 0x100>;
- interrupts = <0x0 0x26 0x0>;
- sdhci,auto-cmd12;
- clocks = <&sw_sdio>;
- sd-uhs-sdr50;
- sd-uhs-ddr50;
- };
- sdhci@f03e0300 {
- non-removable;
- bus-width = <0x8>;
- compatible = "brcm,bcm7425-sdhci";
- reg = <0xf03e0200 0x100>;
- interrupts = <0x0 0x27 0x0>;
- sdhci,auto-cmd12;
- clocks = <sw_sdio>;
- mmc-hs200-1_8v;
- };
|