| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115 |
- menu "Remoteproc drivers"
- # REMOTEPROC gets selected by whoever wants it
- config REMOTEPROC
- tristate
- depends on HAS_DMA
- select CRC32
- select FW_LOADER
- select VIRTIO
- select VIRTUALIZATION
- config OMAP_REMOTEPROC
- tristate "OMAP remoteproc support"
- depends on HAS_DMA
- depends on ARCH_OMAP4 || SOC_OMAP5
- depends on OMAP_IOMMU
- select REMOTEPROC
- select MAILBOX
- select OMAP2PLUS_MBOX
- select RPMSG_VIRTIO
- help
- Say y here to support OMAP's remote processors (dual M3
- and DSP on OMAP4) via the remote processor framework.
- Currently only supported on OMAP4.
- Usually you want to say y here, in order to enable multimedia
- use-cases to run on your platform (multimedia codecs are
- offloaded to remote DSP processors using this framework).
- It's safe to say n here if you're not interested in multimedia
- offloading or just want a bare minimum kernel.
- config STE_MODEM_RPROC
- tristate "STE-Modem remoteproc support"
- depends on HAS_DMA
- select REMOTEPROC
- default n
- help
- Say y or m here to support STE-Modem shared memory driver.
- This can be either built-in or a loadable module.
- If unsure say N.
- config WKUP_M3_RPROC
- tristate "AMx3xx Wakeup M3 remoteproc support"
- depends on SOC_AM33XX || SOC_AM43XX
- select REMOTEPROC
- help
- Say y here to support Wakeup M3 remote processor on TI AM33xx
- and AM43xx family of SoCs.
- Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
- for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
- firmware onto these remote processors.
- If unsure say N.
- config DA8XX_REMOTEPROC
- tristate "DA8xx/OMAP-L13x remoteproc support"
- depends on ARCH_DAVINCI_DA8XX
- select CMA if MMU
- select REMOTEPROC
- select RPMSG_VIRTIO
- help
- Say y here to support DA8xx/OMAP-L13x remote processors via the
- remote processor framework.
- You want to say y here in order to enable AMP
- use-cases to run on your platform (multimedia codecs are
- offloaded to remote DSP processors using this framework).
- This module controls the name of the firmware file that gets
- loaded on the DSP. This file must reside in the /lib/firmware
- directory. It can be specified via the module parameter
- da8xx_fw_name=<filename>, and if not specified will default to
- "rproc-dsp-fw".
- It's safe to say n here if you're not interested in multimedia
- offloading.
- config QCOM_MDT_LOADER
- tristate
- config QCOM_Q6V5_PIL
- tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
- depends on OF && ARCH_QCOM
- depends on QCOM_SMEM
- select MFD_SYSCON
- select QCOM_MDT_LOADER
- select REMOTEPROC
- help
- Say y here to support the Qualcomm Peripherial Image Loader for the
- Hexagon V5 based remote processors.
- config QCOM_WCNSS_PIL
- tristate "Qualcomm WCNSS Peripheral Image Loader"
- depends on OF && ARCH_QCOM
- depends on QCOM_SMEM
- select QCOM_MDT_LOADER
- select QCOM_SCM
- select REMOTEPROC
- help
- Say y here to support the Peripheral Image Loader for the Qualcomm
- Wireless Connectivity Subsystem.
- config ST_REMOTEPROC
- tristate "ST remoteproc support"
- depends on ARCH_STI
- select REMOTEPROC
- help
- Say y here to support ST's adjunct processors via the remote
- processor framework.
- This can be either built-in or a loadable module.
- endmenu
|
