123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292 |
- /*
- * linux/drivers/message/fusion/mptdebug.h
- * For use with LSI PCI chip/adapter(s)
- * running LSI Fusion MPT (Message Passing Technology) firmware.
- *
- * Copyright (c) 1999-2008 LSI Corporation
- * (mailto:DL-MPTFusionLinux@lsi.com)
- *
- */
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- #ifndef MPTDEBUG_H_INCLUDED
- #define MPTDEBUG_H_INCLUDED
- /*
- * debug level can be programmed on the fly via SysFS (hex values)
- *
- * Example: (programming for MPT_DEBUG_EVENTS on host 5)
- *
- * echo 8 > /sys/class/scsi_host/host5/debug_level
- *
- * --------------------------------------------------------
- * mpt_debug_level - command line parameter
- * this allow enabling debug at driver load time (for all iocs)
- *
- * Example (programming for MPT_DEBUG_EVENTS)
- *
- * insmod mptbase.ko mpt_debug_level=8
- *
- * --------------------------------------------------------
- * CONFIG_FUSION_LOGGING - enables compiling debug into driver
- * this can be enabled in the driver Makefile
- *
- *
- * --------------------------------------------------------
- * Please note most debug prints are set to logging priority = debug
- * This is the lowest level, and most verbose. Please refer to manual
- * pages for syslogd or syslogd-ng on how to configure this.
- */
- #define MPT_DEBUG 0x00000001
- #define MPT_DEBUG_MSG_FRAME 0x00000002
- #define MPT_DEBUG_SG 0x00000004
- #define MPT_DEBUG_EVENTS 0x00000008
- #define MPT_DEBUG_VERBOSE_EVENTS 0x00000010
- #define MPT_DEBUG_INIT 0x00000020
- #define MPT_DEBUG_EXIT 0x00000040
- #define MPT_DEBUG_FAIL 0x00000080
- #define MPT_DEBUG_TM 0x00000100
- #define MPT_DEBUG_DV 0x00000200
- #define MPT_DEBUG_REPLY 0x00000400
- #define MPT_DEBUG_HANDSHAKE 0x00000800
- #define MPT_DEBUG_CONFIG 0x00001000
- #define MPT_DEBUG_DL 0x00002000
- #define MPT_DEBUG_RESET 0x00008000
- #define MPT_DEBUG_SCSI 0x00010000
- #define MPT_DEBUG_IOCTL 0x00020000
- #define MPT_DEBUG_FC 0x00080000
- #define MPT_DEBUG_SAS 0x00100000
- #define MPT_DEBUG_SAS_WIDE 0x00200000
- #define MPT_DEBUG_36GB_MEM 0x00400000
- /*
- * CONFIG_FUSION_LOGGING - enabled in Kconfig
- */
- #ifdef CONFIG_FUSION_LOGGING
- #define MPT_CHECK_LOGGING(IOC, CMD, BITS) \
- { \
- if (IOC->debug_level & BITS) \
- CMD; \
- }
- #else
- #define MPT_CHECK_LOGGING(IOC, CMD, BITS)
- #endif
- /*
- * debug macros
- */
- #define dprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG)
- #define dsgprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG)
- #define devtprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS)
- #define devtverboseprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_VERBOSE_EVENTS)
- #define dinitprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT)
- #define dexitprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT)
- #define dfailprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL)
- #define dtmprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM)
- #define ddvprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DV)
- #define dreplyprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY)
- #define dhsprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE)
- #define dcprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG)
- #define ddlprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL)
- #define drsprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET)
- #define dsprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI)
- #define dctlprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL)
- #define dfcprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FC)
- #define dsasprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS)
- #define dsaswideprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
- #define d36memprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_36GB_MEM)
- /*
- * Verbose logging
- */
- #if defined(MPT_DEBUG_VERBOSE) && defined(CONFIG_FUSION_LOGGING)
- static inline void
- DBG_DUMP_FW_DOWNLOAD(MPT_ADAPTER *ioc, u32 *mfp, int numfrags)
- {
- int i;
- if (!(ioc->debug_level & MPT_DEBUG))
- return;
- printk(KERN_DEBUG "F/W download request:\n");
- for (i=0; i < 7+numfrags*2; i++)
- printk(" %08x", le32_to_cpu(mfp[i]));
- printk("\n");
- }
- static inline void
- DBG_DUMP_PUT_MSG_FRAME(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int ii, n;
- if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME))
- return;
- printk(KERN_DEBUG "%s: About to Put msg frame @ %p:\n",
- ioc->name, mfp);
- n = ioc->req_sz/4 - 1;
- while (mfp[n] == 0)
- n--;
- for (ii=0; ii<=n; ii++) {
- if (ii && ((ii%8)==0))
- printk("\n");
- printk(" %08x", le32_to_cpu(mfp[ii]));
- }
- printk("\n");
- }
- static inline void
- DBG_DUMP_FW_REQUEST_FRAME(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int i, n;
- if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME))
- return;
- n = 10;
- printk(KERN_INFO " ");
- for (i = 0; i < n; i++)
- printk(" %08x", le32_to_cpu(mfp[i]));
- printk("\n");
- }
- static inline void
- DBG_DUMP_REQUEST_FRAME(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int i, n;
- if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME))
- return;
- n = 24;
- for (i=0; i<n; i++) {
- if (i && ((i%8)==0))
- printk("\n");
- printk("%08x ", le32_to_cpu(mfp[i]));
- }
- printk("\n");
- }
- static inline void
- DBG_DUMP_REPLY_FRAME(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int i, n;
- if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME))
- return;
- n = (le32_to_cpu(mfp[0]) & 0x00FF0000) >> 16;
- printk(KERN_INFO " ");
- for (i=0; i<n; i++)
- printk(" %08x", le32_to_cpu(mfp[i]));
- printk("\n");
- }
- static inline void
- DBG_DUMP_REQUEST_FRAME_HDR(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int i, n;
- if (!(ioc->debug_level & MPT_DEBUG_MSG_FRAME))
- return;
- n = 3;
- printk(KERN_INFO " ");
- for (i=0; i<n; i++)
- printk(" %08x", le32_to_cpu(mfp[i]));
- printk("\n");
- }
- static inline void
- DBG_DUMP_TM_REQUEST_FRAME(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int i, n;
- if (!(ioc->debug_level & MPT_DEBUG_TM))
- return;
- n = 13;
- printk(KERN_DEBUG "TM_REQUEST:\n");
- for (i=0; i<n; i++) {
- if (i && ((i%8)==0))
- printk("\n");
- printk("%08x ", le32_to_cpu(mfp[i]));
- }
- printk("\n");
- }
- static inline void
- DBG_DUMP_TM_REPLY_FRAME(MPT_ADAPTER *ioc, u32 *mfp)
- {
- int i, n;
- if (!(ioc->debug_level & MPT_DEBUG_TM))
- return;
- n = (le32_to_cpu(mfp[0]) & 0x00FF0000) >> 16;
- printk(KERN_DEBUG "TM_REPLY MessageLength=%d:\n", n);
- for (i=0; i<n; i++) {
- if (i && ((i%8)==0))
- printk("\n");
- printk(" %08x", le32_to_cpu(mfp[i]));
- }
- printk("\n");
- }
- #define dmfprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
- # else /* ifdef MPT_DEBUG_MF */
- #define DBG_DUMP_FW_DOWNLOAD(IOC, mfp, numfrags)
- #define DBG_DUMP_PUT_MSG_FRAME(IOC, mfp)
- #define DBG_DUMP_FW_REQUEST_FRAME(IOC, mfp)
- #define DBG_DUMP_REQUEST_FRAME(IOC, mfp)
- #define DBG_DUMP_REPLY_FRAME(IOC, mfp)
- #define DBG_DUMP_REQUEST_FRAME_HDR(IOC, mfp)
- #define DBG_DUMP_TM_REQUEST_FRAME(IOC, mfp)
- #define DBG_DUMP_TM_REPLY_FRAME(IOC, mfp)
- #define dmfprintk(IOC, CMD) \
- MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
- #endif /* defined(MPT_DEBUG_VERBOSE) && defined(CONFIG_FUSION_LOGGING) */
- #endif /* ifndef MPTDEBUG_H_INCLUDED */
|