bluecard_cs.c 20 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921
  1. /*
  2. *
  3. * Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)
  4. *
  5. * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
  6. *
  7. *
  8. * This program is free software; you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License version 2 as
  10. * published by the Free Software Foundation;
  11. *
  12. * Software distributed under the License is distributed on an "AS
  13. * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14. * implied. See the License for the specific language governing
  15. * rights and limitations under the License.
  16. *
  17. * The initial developer of the original code is David A. Hinds
  18. * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
  19. * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
  20. *
  21. */
  22. #include <linux/module.h>
  23. #include <linux/kernel.h>
  24. #include <linux/init.h>
  25. #include <linux/slab.h>
  26. #include <linux/types.h>
  27. #include <linux/sched.h>
  28. #include <linux/delay.h>
  29. #include <linux/timer.h>
  30. #include <linux/errno.h>
  31. #include <linux/ptrace.h>
  32. #include <linux/ioport.h>
  33. #include <linux/spinlock.h>
  34. #include <linux/moduleparam.h>
  35. #include <linux/wait.h>
  36. #include <linux/skbuff.h>
  37. #include <linux/io.h>
  38. #include <pcmcia/cistpl.h>
  39. #include <pcmcia/ciscode.h>
  40. #include <pcmcia/ds.h>
  41. #include <pcmcia/cisreg.h>
  42. #include <net/bluetooth/bluetooth.h>
  43. #include <net/bluetooth/hci_core.h>
  44. /* ======================== Module parameters ======================== */
  45. MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
  46. MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)");
  47. MODULE_LICENSE("GPL");
  48. /* ======================== Local structures ======================== */
  49. struct bluecard_info {
  50. struct pcmcia_device *p_dev;
  51. struct hci_dev *hdev;
  52. spinlock_t lock; /* For serializing operations */
  53. struct timer_list timer; /* For LED control */
  54. struct sk_buff_head txq;
  55. unsigned long tx_state;
  56. unsigned long rx_state;
  57. unsigned long rx_count;
  58. struct sk_buff *rx_skb;
  59. unsigned char ctrl_reg;
  60. unsigned long hw_state; /* Status of the hardware and LED control */
  61. };
  62. static int bluecard_config(struct pcmcia_device *link);
  63. static void bluecard_release(struct pcmcia_device *link);
  64. static void bluecard_detach(struct pcmcia_device *p_dev);
  65. /* Default baud rate: 57600, 115200, 230400 or 460800 */
  66. #define DEFAULT_BAUD_RATE 230400
  67. /* Hardware states */
  68. #define CARD_READY 1
  69. #define CARD_HAS_PCCARD_ID 4
  70. #define CARD_HAS_POWER_LED 5
  71. #define CARD_HAS_ACTIVITY_LED 6
  72. /* Transmit states */
  73. #define XMIT_SENDING 1
  74. #define XMIT_WAKEUP 2
  75. #define XMIT_BUFFER_NUMBER 5 /* unset = buffer one, set = buffer two */
  76. #define XMIT_BUF_ONE_READY 6
  77. #define XMIT_BUF_TWO_READY 7
  78. #define XMIT_SENDING_READY 8
  79. /* Receiver states */
  80. #define RECV_WAIT_PACKET_TYPE 0
  81. #define RECV_WAIT_EVENT_HEADER 1
  82. #define RECV_WAIT_ACL_HEADER 2
  83. #define RECV_WAIT_SCO_HEADER 3
  84. #define RECV_WAIT_DATA 4
  85. /* Special packet types */
  86. #define PKT_BAUD_RATE_57600 0x80
  87. #define PKT_BAUD_RATE_115200 0x81
  88. #define PKT_BAUD_RATE_230400 0x82
  89. #define PKT_BAUD_RATE_460800 0x83
  90. /* These are the register offsets */
  91. #define REG_COMMAND 0x20
  92. #define REG_INTERRUPT 0x21
  93. #define REG_CONTROL 0x22
  94. #define REG_RX_CONTROL 0x24
  95. #define REG_CARD_RESET 0x30
  96. #define REG_LED_CTRL 0x30
  97. /* REG_COMMAND */
  98. #define REG_COMMAND_TX_BUF_ONE 0x01
  99. #define REG_COMMAND_TX_BUF_TWO 0x02
  100. #define REG_COMMAND_RX_BUF_ONE 0x04
  101. #define REG_COMMAND_RX_BUF_TWO 0x08
  102. #define REG_COMMAND_RX_WIN_ONE 0x00
  103. #define REG_COMMAND_RX_WIN_TWO 0x10
  104. /* REG_CONTROL */
  105. #define REG_CONTROL_BAUD_RATE_57600 0x00
  106. #define REG_CONTROL_BAUD_RATE_115200 0x01
  107. #define REG_CONTROL_BAUD_RATE_230400 0x02
  108. #define REG_CONTROL_BAUD_RATE_460800 0x03
  109. #define REG_CONTROL_RTS 0x04
  110. #define REG_CONTROL_BT_ON 0x08
  111. #define REG_CONTROL_BT_RESET 0x10
  112. #define REG_CONTROL_BT_RES_PU 0x20
  113. #define REG_CONTROL_INTERRUPT 0x40
  114. #define REG_CONTROL_CARD_RESET 0x80
  115. /* REG_RX_CONTROL */
  116. #define RTS_LEVEL_SHIFT_BITS 0x02
  117. /* ======================== LED handling routines ======================== */
  118. static void bluecard_activity_led_timeout(u_long arg)
  119. {
  120. struct bluecard_info *info = (struct bluecard_info *)arg;
  121. unsigned int iobase = info->p_dev->resource[0]->start;
  122. if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
  123. return;
  124. if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
  125. /* Disable activity LED */
  126. outb(0x08 | 0x20, iobase + 0x30);
  127. } else {
  128. /* Disable power LED */
  129. outb(0x00, iobase + 0x30);
  130. }
  131. }
  132. static void bluecard_enable_activity_led(struct bluecard_info *info)
  133. {
  134. unsigned int iobase = info->p_dev->resource[0]->start;
  135. if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
  136. return;
  137. if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
  138. /* Enable activity LED */
  139. outb(0x10 | 0x40, iobase + 0x30);
  140. /* Stop the LED after HZ/4 */
  141. mod_timer(&(info->timer), jiffies + HZ / 4);
  142. } else {
  143. /* Enable power LED */
  144. outb(0x08 | 0x20, iobase + 0x30);
  145. /* Stop the LED after HZ/2 */
  146. mod_timer(&(info->timer), jiffies + HZ / 2);
  147. }
  148. }
  149. /* ======================== Interrupt handling ======================== */
  150. static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len)
  151. {
  152. int i, actual;
  153. actual = (len > 15) ? 15 : len;
  154. outb_p(actual, iobase + offset);
  155. for (i = 0; i < actual; i++)
  156. outb_p(buf[i], iobase + offset + i + 1);
  157. return actual;
  158. }
  159. static void bluecard_write_wakeup(struct bluecard_info *info)
  160. {
  161. if (!info) {
  162. BT_ERR("Unknown device");
  163. return;
  164. }
  165. if (!test_bit(XMIT_SENDING_READY, &(info->tx_state)))
  166. return;
  167. if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
  168. set_bit(XMIT_WAKEUP, &(info->tx_state));
  169. return;
  170. }
  171. do {
  172. unsigned int iobase = info->p_dev->resource[0]->start;
  173. unsigned int offset;
  174. unsigned char command;
  175. unsigned long ready_bit;
  176. register struct sk_buff *skb;
  177. int len;
  178. clear_bit(XMIT_WAKEUP, &(info->tx_state));
  179. if (!pcmcia_dev_present(info->p_dev))
  180. return;
  181. if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) {
  182. if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state)))
  183. break;
  184. offset = 0x10;
  185. command = REG_COMMAND_TX_BUF_TWO;
  186. ready_bit = XMIT_BUF_TWO_READY;
  187. } else {
  188. if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state)))
  189. break;
  190. offset = 0x00;
  191. command = REG_COMMAND_TX_BUF_ONE;
  192. ready_bit = XMIT_BUF_ONE_READY;
  193. }
  194. skb = skb_dequeue(&(info->txq));
  195. if (!skb)
  196. break;
  197. if (hci_skb_pkt_type(skb) & 0x80) {
  198. /* Disable RTS */
  199. info->ctrl_reg |= REG_CONTROL_RTS;
  200. outb(info->ctrl_reg, iobase + REG_CONTROL);
  201. }
  202. /* Activate LED */
  203. bluecard_enable_activity_led(info);
  204. /* Send frame */
  205. len = bluecard_write(iobase, offset, skb->data, skb->len);
  206. /* Tell the FPGA to send the data */
  207. outb_p(command, iobase + REG_COMMAND);
  208. /* Mark the buffer as dirty */
  209. clear_bit(ready_bit, &(info->tx_state));
  210. if (hci_skb_pkt_type(skb) & 0x80) {
  211. DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
  212. DEFINE_WAIT(wait);
  213. unsigned char baud_reg;
  214. switch (hci_skb_pkt_type(skb)) {
  215. case PKT_BAUD_RATE_460800:
  216. baud_reg = REG_CONTROL_BAUD_RATE_460800;
  217. break;
  218. case PKT_BAUD_RATE_230400:
  219. baud_reg = REG_CONTROL_BAUD_RATE_230400;
  220. break;
  221. case PKT_BAUD_RATE_115200:
  222. baud_reg = REG_CONTROL_BAUD_RATE_115200;
  223. break;
  224. case PKT_BAUD_RATE_57600:
  225. /* Fall through... */
  226. default:
  227. baud_reg = REG_CONTROL_BAUD_RATE_57600;
  228. break;
  229. }
  230. /* Wait until the command reaches the baseband */
  231. prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
  232. schedule_timeout(HZ/10);
  233. finish_wait(&wq, &wait);
  234. /* Set baud on baseband */
  235. info->ctrl_reg &= ~0x03;
  236. info->ctrl_reg |= baud_reg;
  237. outb(info->ctrl_reg, iobase + REG_CONTROL);
  238. /* Enable RTS */
  239. info->ctrl_reg &= ~REG_CONTROL_RTS;
  240. outb(info->ctrl_reg, iobase + REG_CONTROL);
  241. /* Wait before the next HCI packet can be send */
  242. prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE);
  243. schedule_timeout(HZ);
  244. finish_wait(&wq, &wait);
  245. }
  246. if (len == skb->len) {
  247. kfree_skb(skb);
  248. } else {
  249. skb_pull(skb, len);
  250. skb_queue_head(&(info->txq), skb);
  251. }
  252. info->hdev->stat.byte_tx += len;
  253. /* Change buffer */
  254. change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state));
  255. } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
  256. clear_bit(XMIT_SENDING, &(info->tx_state));
  257. }
  258. static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size)
  259. {
  260. int i, n, len;
  261. outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND);
  262. len = inb(iobase + offset);
  263. n = 0;
  264. i = 1;
  265. while (n < len) {
  266. if (i == 16) {
  267. outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND);
  268. i = 0;
  269. }
  270. buf[n] = inb(iobase + offset + i);
  271. n++;
  272. i++;
  273. }
  274. return len;
  275. }
  276. static void bluecard_receive(struct bluecard_info *info,
  277. unsigned int offset)
  278. {
  279. unsigned int iobase;
  280. unsigned char buf[31];
  281. int i, len;
  282. if (!info) {
  283. BT_ERR("Unknown device");
  284. return;
  285. }
  286. iobase = info->p_dev->resource[0]->start;
  287. if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
  288. bluecard_enable_activity_led(info);
  289. len = bluecard_read(iobase, offset, buf, sizeof(buf));
  290. for (i = 0; i < len; i++) {
  291. /* Allocate packet */
  292. if (!info->rx_skb) {
  293. info->rx_state = RECV_WAIT_PACKET_TYPE;
  294. info->rx_count = 0;
  295. info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
  296. if (!info->rx_skb) {
  297. BT_ERR("Can't allocate mem for new packet");
  298. return;
  299. }
  300. }
  301. if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
  302. hci_skb_pkt_type(info->rx_skb) = buf[i];
  303. switch (hci_skb_pkt_type(info->rx_skb)) {
  304. case 0x00:
  305. /* init packet */
  306. if (offset != 0x00) {
  307. set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
  308. set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
  309. set_bit(XMIT_SENDING_READY, &(info->tx_state));
  310. bluecard_write_wakeup(info);
  311. }
  312. kfree_skb(info->rx_skb);
  313. info->rx_skb = NULL;
  314. break;
  315. case HCI_EVENT_PKT:
  316. info->rx_state = RECV_WAIT_EVENT_HEADER;
  317. info->rx_count = HCI_EVENT_HDR_SIZE;
  318. break;
  319. case HCI_ACLDATA_PKT:
  320. info->rx_state = RECV_WAIT_ACL_HEADER;
  321. info->rx_count = HCI_ACL_HDR_SIZE;
  322. break;
  323. case HCI_SCODATA_PKT:
  324. info->rx_state = RECV_WAIT_SCO_HEADER;
  325. info->rx_count = HCI_SCO_HDR_SIZE;
  326. break;
  327. default:
  328. /* unknown packet */
  329. BT_ERR("Unknown HCI packet with type 0x%02x received",
  330. hci_skb_pkt_type(info->rx_skb));
  331. info->hdev->stat.err_rx++;
  332. kfree_skb(info->rx_skb);
  333. info->rx_skb = NULL;
  334. break;
  335. }
  336. } else {
  337. *skb_put(info->rx_skb, 1) = buf[i];
  338. info->rx_count--;
  339. if (info->rx_count == 0) {
  340. int dlen;
  341. struct hci_event_hdr *eh;
  342. struct hci_acl_hdr *ah;
  343. struct hci_sco_hdr *sh;
  344. switch (info->rx_state) {
  345. case RECV_WAIT_EVENT_HEADER:
  346. eh = hci_event_hdr(info->rx_skb);
  347. info->rx_state = RECV_WAIT_DATA;
  348. info->rx_count = eh->plen;
  349. break;
  350. case RECV_WAIT_ACL_HEADER:
  351. ah = hci_acl_hdr(info->rx_skb);
  352. dlen = __le16_to_cpu(ah->dlen);
  353. info->rx_state = RECV_WAIT_DATA;
  354. info->rx_count = dlen;
  355. break;
  356. case RECV_WAIT_SCO_HEADER:
  357. sh = hci_sco_hdr(info->rx_skb);
  358. info->rx_state = RECV_WAIT_DATA;
  359. info->rx_count = sh->dlen;
  360. break;
  361. case RECV_WAIT_DATA:
  362. hci_recv_frame(info->hdev, info->rx_skb);
  363. info->rx_skb = NULL;
  364. break;
  365. }
  366. }
  367. }
  368. }
  369. info->hdev->stat.byte_rx += len;
  370. }
  371. static irqreturn_t bluecard_interrupt(int irq, void *dev_inst)
  372. {
  373. struct bluecard_info *info = dev_inst;
  374. unsigned int iobase;
  375. unsigned char reg;
  376. if (!info || !info->hdev)
  377. /* our irq handler is shared */
  378. return IRQ_NONE;
  379. if (!test_bit(CARD_READY, &(info->hw_state)))
  380. return IRQ_HANDLED;
  381. iobase = info->p_dev->resource[0]->start;
  382. spin_lock(&(info->lock));
  383. /* Disable interrupt */
  384. info->ctrl_reg &= ~REG_CONTROL_INTERRUPT;
  385. outb(info->ctrl_reg, iobase + REG_CONTROL);
  386. reg = inb(iobase + REG_INTERRUPT);
  387. if ((reg != 0x00) && (reg != 0xff)) {
  388. if (reg & 0x04) {
  389. bluecard_receive(info, 0x00);
  390. outb(0x04, iobase + REG_INTERRUPT);
  391. outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
  392. }
  393. if (reg & 0x08) {
  394. bluecard_receive(info, 0x10);
  395. outb(0x08, iobase + REG_INTERRUPT);
  396. outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
  397. }
  398. if (reg & 0x01) {
  399. set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
  400. outb(0x01, iobase + REG_INTERRUPT);
  401. bluecard_write_wakeup(info);
  402. }
  403. if (reg & 0x02) {
  404. set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
  405. outb(0x02, iobase + REG_INTERRUPT);
  406. bluecard_write_wakeup(info);
  407. }
  408. }
  409. /* Enable interrupt */
  410. info->ctrl_reg |= REG_CONTROL_INTERRUPT;
  411. outb(info->ctrl_reg, iobase + REG_CONTROL);
  412. spin_unlock(&(info->lock));
  413. return IRQ_HANDLED;
  414. }
  415. /* ======================== Device specific HCI commands ======================== */
  416. static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
  417. {
  418. struct bluecard_info *info = hci_get_drvdata(hdev);
  419. struct sk_buff *skb;
  420. /* Ericsson baud rate command */
  421. unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
  422. skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
  423. if (!skb) {
  424. BT_ERR("Can't allocate mem for new packet");
  425. return -1;
  426. }
  427. switch (baud) {
  428. case 460800:
  429. cmd[4] = 0x00;
  430. hci_skb_pkt_type(skb) = PKT_BAUD_RATE_460800;
  431. break;
  432. case 230400:
  433. cmd[4] = 0x01;
  434. hci_skb_pkt_type(skb) = PKT_BAUD_RATE_230400;
  435. break;
  436. case 115200:
  437. cmd[4] = 0x02;
  438. hci_skb_pkt_type(skb) = PKT_BAUD_RATE_115200;
  439. break;
  440. case 57600:
  441. /* Fall through... */
  442. default:
  443. cmd[4] = 0x03;
  444. hci_skb_pkt_type(skb) = PKT_BAUD_RATE_57600;
  445. break;
  446. }
  447. memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
  448. skb_queue_tail(&(info->txq), skb);
  449. bluecard_write_wakeup(info);
  450. return 0;
  451. }
  452. /* ======================== HCI interface ======================== */
  453. static int bluecard_hci_flush(struct hci_dev *hdev)
  454. {
  455. struct bluecard_info *info = hci_get_drvdata(hdev);
  456. /* Drop TX queue */
  457. skb_queue_purge(&(info->txq));
  458. return 0;
  459. }
  460. static int bluecard_hci_open(struct hci_dev *hdev)
  461. {
  462. struct bluecard_info *info = hci_get_drvdata(hdev);
  463. if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
  464. bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
  465. if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
  466. unsigned int iobase = info->p_dev->resource[0]->start;
  467. /* Enable LED */
  468. outb(0x08 | 0x20, iobase + 0x30);
  469. }
  470. return 0;
  471. }
  472. static int bluecard_hci_close(struct hci_dev *hdev)
  473. {
  474. struct bluecard_info *info = hci_get_drvdata(hdev);
  475. bluecard_hci_flush(hdev);
  476. if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) {
  477. unsigned int iobase = info->p_dev->resource[0]->start;
  478. /* Disable LED */
  479. outb(0x00, iobase + 0x30);
  480. }
  481. return 0;
  482. }
  483. static int bluecard_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
  484. {
  485. struct bluecard_info *info = hci_get_drvdata(hdev);
  486. switch (hci_skb_pkt_type(skb)) {
  487. case HCI_COMMAND_PKT:
  488. hdev->stat.cmd_tx++;
  489. break;
  490. case HCI_ACLDATA_PKT:
  491. hdev->stat.acl_tx++;
  492. break;
  493. case HCI_SCODATA_PKT:
  494. hdev->stat.sco_tx++;
  495. break;
  496. }
  497. /* Prepend skb with frame type */
  498. memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
  499. skb_queue_tail(&(info->txq), skb);
  500. bluecard_write_wakeup(info);
  501. return 0;
  502. }
  503. /* ======================== Card services HCI interaction ======================== */
  504. static int bluecard_open(struct bluecard_info *info)
  505. {
  506. unsigned int iobase = info->p_dev->resource[0]->start;
  507. struct hci_dev *hdev;
  508. unsigned char id;
  509. spin_lock_init(&(info->lock));
  510. init_timer(&(info->timer));
  511. info->timer.function = &bluecard_activity_led_timeout;
  512. info->timer.data = (u_long)info;
  513. skb_queue_head_init(&(info->txq));
  514. info->rx_state = RECV_WAIT_PACKET_TYPE;
  515. info->rx_count = 0;
  516. info->rx_skb = NULL;
  517. /* Initialize HCI device */
  518. hdev = hci_alloc_dev();
  519. if (!hdev) {
  520. BT_ERR("Can't allocate HCI device");
  521. return -ENOMEM;
  522. }
  523. info->hdev = hdev;
  524. hdev->bus = HCI_PCCARD;
  525. hci_set_drvdata(hdev, info);
  526. SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
  527. hdev->open = bluecard_hci_open;
  528. hdev->close = bluecard_hci_close;
  529. hdev->flush = bluecard_hci_flush;
  530. hdev->send = bluecard_hci_send_frame;
  531. id = inb(iobase + 0x30);
  532. if ((id & 0x0f) == 0x02)
  533. set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state));
  534. if (id & 0x10)
  535. set_bit(CARD_HAS_POWER_LED, &(info->hw_state));
  536. if (id & 0x20)
  537. set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state));
  538. /* Reset card */
  539. info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
  540. outb(info->ctrl_reg, iobase + REG_CONTROL);
  541. /* Turn FPGA off */
  542. outb(0x80, iobase + 0x30);
  543. /* Wait some time */
  544. msleep(10);
  545. /* Turn FPGA on */
  546. outb(0x00, iobase + 0x30);
  547. /* Activate card */
  548. info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU;
  549. outb(info->ctrl_reg, iobase + REG_CONTROL);
  550. /* Enable interrupt */
  551. outb(0xff, iobase + REG_INTERRUPT);
  552. info->ctrl_reg |= REG_CONTROL_INTERRUPT;
  553. outb(info->ctrl_reg, iobase + REG_CONTROL);
  554. if ((id & 0x0f) == 0x03) {
  555. /* Disable RTS */
  556. info->ctrl_reg |= REG_CONTROL_RTS;
  557. outb(info->ctrl_reg, iobase + REG_CONTROL);
  558. /* Set baud rate */
  559. info->ctrl_reg |= 0x03;
  560. outb(info->ctrl_reg, iobase + REG_CONTROL);
  561. /* Enable RTS */
  562. info->ctrl_reg &= ~REG_CONTROL_RTS;
  563. outb(info->ctrl_reg, iobase + REG_CONTROL);
  564. set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
  565. set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
  566. set_bit(XMIT_SENDING_READY, &(info->tx_state));
  567. }
  568. /* Start the RX buffers */
  569. outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
  570. outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
  571. /* Signal that the hardware is ready */
  572. set_bit(CARD_READY, &(info->hw_state));
  573. /* Drop TX queue */
  574. skb_queue_purge(&(info->txq));
  575. /* Control the point at which RTS is enabled */
  576. outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL);
  577. /* Timeout before it is safe to send the first HCI packet */
  578. msleep(1250);
  579. /* Register HCI device */
  580. if (hci_register_dev(hdev) < 0) {
  581. BT_ERR("Can't register HCI device");
  582. info->hdev = NULL;
  583. hci_free_dev(hdev);
  584. return -ENODEV;
  585. }
  586. return 0;
  587. }
  588. static int bluecard_close(struct bluecard_info *info)
  589. {
  590. unsigned int iobase = info->p_dev->resource[0]->start;
  591. struct hci_dev *hdev = info->hdev;
  592. if (!hdev)
  593. return -ENODEV;
  594. bluecard_hci_close(hdev);
  595. clear_bit(CARD_READY, &(info->hw_state));
  596. /* Reset card */
  597. info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
  598. outb(info->ctrl_reg, iobase + REG_CONTROL);
  599. /* Turn FPGA off */
  600. outb(0x80, iobase + 0x30);
  601. hci_unregister_dev(hdev);
  602. hci_free_dev(hdev);
  603. return 0;
  604. }
  605. static int bluecard_probe(struct pcmcia_device *link)
  606. {
  607. struct bluecard_info *info;
  608. /* Create new info device */
  609. info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
  610. if (!info)
  611. return -ENOMEM;
  612. info->p_dev = link;
  613. link->priv = info;
  614. link->config_flags |= CONF_ENABLE_IRQ;
  615. return bluecard_config(link);
  616. }
  617. static void bluecard_detach(struct pcmcia_device *link)
  618. {
  619. bluecard_release(link);
  620. }
  621. static int bluecard_config(struct pcmcia_device *link)
  622. {
  623. struct bluecard_info *info = link->priv;
  624. int i, n;
  625. link->config_index = 0x20;
  626. link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
  627. link->resource[0]->end = 64;
  628. link->io_lines = 6;
  629. for (n = 0; n < 0x400; n += 0x40) {
  630. link->resource[0]->start = n ^ 0x300;
  631. i = pcmcia_request_io(link);
  632. if (i == 0)
  633. break;
  634. }
  635. if (i != 0)
  636. goto failed;
  637. i = pcmcia_request_irq(link, bluecard_interrupt);
  638. if (i != 0)
  639. goto failed;
  640. i = pcmcia_enable_device(link);
  641. if (i != 0)
  642. goto failed;
  643. if (bluecard_open(info) != 0)
  644. goto failed;
  645. return 0;
  646. failed:
  647. bluecard_release(link);
  648. return -ENODEV;
  649. }
  650. static void bluecard_release(struct pcmcia_device *link)
  651. {
  652. struct bluecard_info *info = link->priv;
  653. bluecard_close(info);
  654. del_timer_sync(&(info->timer));
  655. pcmcia_disable_device(link);
  656. }
  657. static const struct pcmcia_device_id bluecard_ids[] = {
  658. PCMCIA_DEVICE_PROD_ID12("BlueCard", "LSE041", 0xbaf16fbf, 0x657cc15e),
  659. PCMCIA_DEVICE_PROD_ID12("BTCFCARD", "LSE139", 0xe3987764, 0x2524b59c),
  660. PCMCIA_DEVICE_PROD_ID12("WSS", "LSE039", 0x0a0736ec, 0x24e6dfab),
  661. PCMCIA_DEVICE_NULL
  662. };
  663. MODULE_DEVICE_TABLE(pcmcia, bluecard_ids);
  664. static struct pcmcia_driver bluecard_driver = {
  665. .owner = THIS_MODULE,
  666. .name = "bluecard_cs",
  667. .probe = bluecard_probe,
  668. .remove = bluecard_detach,
  669. .id_table = bluecard_ids,
  670. };
  671. module_pcmcia_driver(bluecard_driver);