123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273 |
- /*
- * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
- #include <linux/types.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/memory.h>
- #include <linux/platform_device.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/nand.h>
- #include <linux/gpio.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/time.h>
- #include <asm/mach/map.h>
- #include <asm/page.h>
- #include <asm/setup.h>
- #include "common.h"
- #include "devices-imx31.h"
- #include "hardware.h"
- #include "iomux-mx3.h"
- /* FPGA defines */
- #define QONG_FPGA_VERSION(major, minor, rev) \
- (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
- #define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
- #define QONG_FPGA_PERIPH_SIZE (1 << 24)
- #define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
- #define QONG_FPGA_CTRL_SIZE 0x10
- /* FPGA control registers */
- #define QONG_FPGA_CTRL_VERSION 0x00
- #define QONG_DNET_ID 1
- #define QONG_DNET_BASEADDR \
- (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
- #define QONG_DNET_SIZE 0x00001000
- static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
- };
- static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
- };
- static inline void __init mxc_init_imx_uart(void)
- {
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
- "uart-0");
- imx31_add_imx_uart0(&uart_pdata);
- }
- static struct resource dnet_resources[] = {
- {
- .name = "dnet-memory",
- .start = QONG_DNET_BASEADDR,
- .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct platform_device dnet_device = {
- .name = "dnet",
- .id = -1,
- .num_resources = ARRAY_SIZE(dnet_resources),
- .resource = dnet_resources,
- };
- static int __init qong_init_dnet(void)
- {
- int ret;
- dnet_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
- dnet_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
- ret = platform_device_register(&dnet_device);
- return ret;
- }
- /* MTD NOR flash */
- static struct physmap_flash_data qong_flash_data = {
- .width = 2,
- };
- static struct resource qong_flash_resource = {
- .start = MX31_CS0_BASE_ADDR,
- .end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
- .flags = IORESOURCE_MEM,
- };
- static struct platform_device qong_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &qong_flash_data,
- },
- .resource = &qong_flash_resource,
- .num_resources = 1,
- };
- static void qong_init_nor_mtd(void)
- {
- (void)platform_device_register(&qong_nor_mtd_device);
- }
- /*
- * Hardware specific access to control-lines
- */
- static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
- {
- struct nand_chip *nand_chip = mtd_to_nand(mtd);
- if (cmd == NAND_CMD_NONE)
- return;
- if (ctrl & NAND_CLE)
- writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
- else
- writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
- }
- /*
- * Read the Device Ready pin.
- */
- static int qong_nand_device_ready(struct mtd_info *mtd)
- {
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
- }
- static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
- {
- if (chip >= 0)
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
- else
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
- }
- static struct platform_nand_data qong_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 20,
- .options = 0,
- },
- .ctrl = {
- .cmd_ctrl = qong_nand_cmd_ctrl,
- .dev_ready = qong_nand_device_ready,
- .select_chip = qong_nand_select_chip,
- }
- };
- static struct resource qong_nand_resource = {
- .start = MX31_CS3_BASE_ADDR,
- .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- };
- static struct platform_device qong_nand_device = {
- .name = "gen_nand",
- .id = -1,
- .dev = {
- .platform_data = &qong_nand_data,
- },
- .num_resources = 1,
- .resource = &qong_nand_resource,
- };
- static void __init qong_init_nand_mtd(void)
- {
- /* init CS */
- imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
- imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
- imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
- mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
- /* enable pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
- /* ready/busy pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
- /* write protect pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
- platform_device_register(&qong_nand_device);
- }
- static void __init qong_init_fpga(void)
- {
- void __iomem *regs;
- u32 fpga_ver;
- regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
- if (!regs) {
- printk(KERN_ERR "%s: failed to map registers, aborting.\n",
- __func__);
- return;
- }
- fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
- iounmap(regs);
- printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
- (fpga_ver & 0xF000) >> 12,
- (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
- if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
- printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
- "devices won't be registered!\n");
- return;
- }
- /* register FPGA-based devices */
- qong_init_nand_mtd();
- qong_init_dnet();
- }
- /*
- * Board specific initialization.
- */
- static void __init qong_init(void)
- {
- imx31_soc_init();
- mxc_init_imx_uart();
- qong_init_nor_mtd();
- imx31_add_imx2_wdt();
- }
- static void __init qong_timer_init(void)
- {
- mx31_clocks_init(26000000);
- }
- MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
- /* Maintainer: DENX Software Engineering GmbH */
- .atag_offset = 0x100,
- .map_io = mx31_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = qong_timer_init,
- .init_machine = qong_init,
- .init_late = qong_init_fpga,
- .restart = mxc_restart,
- MACHINE_END
|