dragora/qi/doc/qi.texi

\input texinfo   @c -*-texinfo-*-
@comment $Id@w{$}
@comment %**start of header
@setfilename qi.info
@settitle Qi manual
@documentencoding ISO-8859-1
@syncodeindex pg cp
@comment %**end of header

@set VERSION 1.0-rc4
@set UPDATED 30 Jan 2017

@copying
This manual is for Qi (version @value{VERSION},
@value{UPDATED}), which is a simple source builder and package manager.

Copyright @copyright{} 2015, 2016, 2017 Matias A. Fonzo, Argentina,
Santiago del Estero.

@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts.  A copy of the license is included in the section entitled
``GNU Free Documentation License''.
@end quotation
@end copying

@dircategory Texinfo documentation system
@direntry
* Qi: (qi).                     Source builder and package manager.
@end direntry

@titlepage
@finalout
@title Qi
@subtitle for version @value{VERSION}, @value{UPDATED}
@author Matias A. Fonzo (@email{selk@@dragora.org})

@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@contents

@ifnottex
@node Top
@top

This manual is for Qi (version @value{VERSION},
@value{UPDATED}).
@end ifnottex

@menu
* Introduction::                    Purpose, description
* Invocation::                      Command-line interface
* The qirc file::                   Configuration file
* Packages::                        Managing packages
* Recipes::                         Building packages
* Order files::                     Handling the build order
* Examine packages::                Debugging purposes
* Messages::                        Output messages
* Exit status::                     Exit codes
* GNU Free Documentation License::
* Index::
@end menu

@sp 1
Copyright @copyright{} 2015-2017 Matias A. Fonzo, Argentina, Santiago
del Estero.

The Qi home page can be found at @uref{http://www.dragora.org}.
@w{Send bug reports or suggestions to @email{dragora-users@@nongnu.org}.}


@node Introduction
@chapter Introduction
@cindex introduction

Qi is a source builder and a package manager:

It contains a set of (individual) tools to build, install, remove, and
upgrade software packages.  It follows the philosophy of simplicity
without adding too many features, such as those that can be found in
popular package managers.  Basically it does two things: builds
packages and manages them.

  Qi constructs the sources using recipe names, files that contain
specific instructions to build every source.  As result, a binary
package is obtained which can be installed, removed, upgraded, or
inspected in the system.

The packages are managed thanks to an external tool called
@emph{graft(1)}, which provides a mechanism for managing multiple
packages under a single directory hierarchy, it was inspired by both
Depot (Carnegie Mellon University) and Stow (Bob Glickstein).  In this
aspect, Qi complements Graft: it can work with packages, check them,
solve conflicts, and more...


@node Invocation
@chapter Invocation
@cindex invocation

The synopsis to invoke Qi is:

@example
pkg<action> [options] [package|recipe|order] ...
@end example

@noindent
The following commands or actions are supported by Qi:

@table @samp

@item pkghelp
Shows the help.

@item pkgadd
Add the packages to the system using @emph{graft(1)} for linking.

@item pkgremove
Remove the packages from the system.

@item pkgupgrade
Upgrade software packages.

@item pkgbuild
Build packages using recipe files.

@item pkgorder
Resolves the build order through .order files.

@item pkgerupt
Examine packages for debugging purposes.

@sp 1
@noindent
@strong{Global options}

There are global or common options for the commands, as well as specific to each one.

@item -h
Show options for the given command and exit.

@sp 1
@noindent
@strong{Options for command @samp{pkgadd}:}

@item -f
Force package installation (implies -p).

@item -P
Extract package on an installation tree.

This option sets @samp{$@{packagedir@}}.

Default value: @emph{PREFIX/pkg}

@item -p
Prune conflicts.

@item -t
Target directory for linking.

This option sets @samp{$@{targetdir@}}.

Default value: @emph{/}

@item -V
@emph{graft(1)} very verbose.

@item -w
Warn about the files that will be linked.

@sp 1
@noindent
@strong{Options for command @samp{pkgremove}:}

@item -k
Keep (don't delete) package directory.

@item -P
Remove from an installation tree.

This option sets @samp{$@{packagedir@}}.

Default value: @emph{PREFIX/pkg}

@item -p
Prune conflicts.

@item -t
Target directory for unlinking.

This option sets @samp{$@{targetdir@}}.

Default value: @emph{/}

@item -V
@emph{graft(1)} very verbose.

@sp 1
@noindent
@strong{Options for command @samp{pkgupgrade}:}

@item -k
Keep (don't delete) package directory.

@item -P
Package installation tree.

This option sets @samp{$@{packagedir@}}.

Default value: @emph{PREFIX/pkg}

@item -t
Target directory.

This option sets @samp{$@{targetdir@}}.

Default value: @emph{/}

@item -V
Enable (very) verbose mode.

@item -w
Warn about packages that will be upgraded.

@sp 1
@noindent
@strong{Options for command @samp{pkgbuild}:}

@item -a
Architecture to use.

This option sets @samp{$@{arch@}}.

Default value is obtained via @emph{uname(1)} as @samp{uname -m}.

@item -i
Increment release number.

This option increment the release number when a package is produced.

@item -j
Parallel jobs for the compiler

This option sets @samp{$@{jobs@}}.

Default value: @emph{1}

@item -k
Keep (don't delete) @samp{$@{srcdir@}} and @samp{$@{destdir@}}.

@item -n
Don't create a .tlz package.

@item -o
Where the produced packages are written.

This option sets @samp{$@{outdir@}}.

Default value: @emph{/var/cache/qi/packages}

@item -U
Perform package upgrade after build.

This option calls to @command{pkgupgrade}.

@sp 1
@noindent
@strong{Options for command @samp{pkgorder}:}

@item -x
Exclude depends file.

@section Environment
@cindex environment

Some influential environment variables:

@item QICFLAGS
C compiler flags for building packages.

Default value: @emph{"-g0 -Os"}

@item QICXXFLAGS
C++ compiler flags for building packages.

Default value: @emph{"-g0 -Os"}

@item QILDFLAGS
Linker flags for building packages.

Default value: @emph{-s}

@item DOPOST
post-install script control variable.

The @env{DOPOST} variable is currently used for @command{pkgadd},
@command{pkgupgrade}, @command{pkgbuild} (when option -U is given).

A different value than "DOPOST" omits the execution of the post-install
script (if any).

@item RC
Runtime configuration file.

A different value than "RC" overrides the configuration file.

This is used by: @command{pkgadd}, @command{pkgremove},
@command{pkgupgrade}, @command{pkgbuild}.

@item TMPDIR
Temporary directory (by default @emph{/tmp}).

@env{TMPDIR} is expanded with random numbers for major security.

This is used by: @command{pkgbuild}, @command{pkgerupt}.
@end table

@section Notes
@cindex notes

@itemize @bullet
@item Command names has been prefixed with @samp{pkg} to facilitate the
set in relation to its purpose.

@item The @emph{PREFIX} reference is related with the installation
prefix of Qi.

@item All the options can be mixed.  Options specified in the
command-line have priority over the config file @file{qirc}.
If there are no options, and if @file{qirc} is not present,
default (internal) values will be used instead.
@end itemize


@node The qirc file
@chapter The qirc file
@cindex the qirc file

@file{qirc} is the configuration file for Qi used at runtime during the
installation, removal of a package or when a recipe is built.  This
file is optional, and it can be useful to define variables and
configure external tools (such as a download manager) for default use.

@itemize @bullet
@item Variables are declared as @samp{name=value}.

@item Declaration of values should only take one line, no line break.

@item Assignments like @samp{name=$var} are only interpreted as
literal.
@end itemize

@noindent
The options specified in the command-line can override the values
specified in the configuration file.  For more information, see
@ref{Invocation}.

@noindent
The order in which Qi looks for this file is:

@enumerate
@item
@env{$@{HOME@}/.qirc}
@- Effective user.

@item
@samp{$@{sysconfdir@}/qirc}
@- System-wide.
@end enumerate

If you intend to run Qi for a specific user, you should copy the file
@samp{$@{sysconfdir@}/qirc} to @env{$@{HOME@}/.qirc} setting
@samp{$@{packagedir@}} and @samp{$@{targetdir@}} for your @env{$HOME}.


@node Packages
@chapter Packages
@cindex packages

A package is a suite of programs usually distributed in binary form
which may also contain manual pages, documentation, or any other file
associated to a specific software.

The Qi package format is a simple redistributable @emph{tar(1)} archive
compressed with @emph{lzip(1)}.  The package extension ends in ".tlz".

@noindent
Both package installation and package deinstallation are managed using
@samp{$@{packagedir@}} and @samp{$@{targetdir@}}:

@samp{$@{packagedir@}} is a common directory tree where the package contents
is decompressed (resides).  By default the tree is located at
@emph{PREFIX/pkg}.

@samp{$@{targetdir@}} is a target directory where the links will be
made taking @samp{$@{packagedir@}/package_name} into account.

  Packages are installed in self-contained directory trees and symbolic
links from a common area are made to the package files.  This allows
multiple versions of the same package to co-exist on the one system.

  All the links to install or to remove a package are managed using
@emph{graft(1)}.  Since multiple packages can be installed or removed
at the same time, certain conflicts may arise between the packages.

  According to the User's Guide of Graft@footnote{The official guide
for Graft can be found at
@url{http://peters.gormand.com.au/Home/tools/graft/graft.html}.},
a conflict is defined as one of the following conditions:

@itemize @bullet
@item If the package object is a directory and the target object exists
but is not a directory.

@item If the package object is not a directory and the target object
exists and is not a symbolic link.

@item If the package object is not a directory and the target object
exists and is a symbolic link to something other than the package
object.
@end itemize

@noindent
Qi's default behavior is to not proceed with the installation when a
conflict occurs.  But when a package that is going to be removed is in
conflict with another package, @emph{graft(1)} removes those parts that
are not in conflict, leaving the links belonging to the original
package.  This behavior can be changed if the option -p is specified
(see the examples below).

@section Adding packages
@cindex adding packages

This sort order is particularly useful just before the actual package
installation, because it helps to understand how the package
installation works:

@enumerate
@item Detects and reports if the package is already installed.

@item Ignores some signals up to completing the installation:
HUP INT QUIT ABRT TERM.

@item The integrity of the file (package) is checked.

@item Creates required directory for the package as
@samp{$@{packagedir@}/package_name}.

@item Decompress the content of the package in
@samp{$@{packagedir@}/package_name}.

@item A test of the package is performed before completing the
installation to see if there are no conflicts with another package.
This is the default behavior if -p is not supplied.

@item @emph{graft(1)} is invoked to install symbolic links from
the package installation directory to the target directory.

@item If the meta file is readable, the description will be shown for
the package.

@item Run post install instructions from @file{post-install}, if any.
@end enumerate

@noindent
@emph{Usage:} pkgadd [-hfpVw] [-P <DIR>] [-t <DIR>] [package.tlz ...]

To install a single package, simply type:

@example
pkgadd coreutils-8.24-x86_64+1.tlz
@end example

To install multiple packages at once:

@example
pkgadd gcc-4.9.3-x86_64+1.tlz rafaela-2.2-i586+1.tlz ...
@end example

Warn about the files that will be linked:

@example
pkgadd -w gcc-4.9.3-x86_64+1.tlz
@end example

@itemize @bullet
@item This is to verify the content of a package before installing it.
@end itemize

See what happens when a package is installed (very verbose):

@example
pkgadd -V mariana-3.0-x86_64+1.tlz
@end example

@itemize @bullet
@item This is for a detailed (long) output.
@end itemize

Installing in a different directory tree and target:

@example
pkgadd -P /tmp/pkgdir -T /tmp/targetdir lzip-1.17-i586+1.tlz
@end example

  When a package is already installed, @command{pkgadd} refuses to
continue.  This is to keep some control over the database of your
packages, if you really want to force the installation of a package,
you can use the -f option (which implies -p).  See below.

@strong{Pruning conflicts}

Remove objects (files, links or directories) from the target
directory that are in conflict with the package directory:

@example
pkgadd -p zutils-1.4-x86_64+1.tlz
@end example

When the -p option is used, it proceeds to install the package
normally, but first will try to remove any conflict.  Use it with care,
combine this option with -V.

@section Removing packages
@cindex removing packages

This sort order is particularly useful just before the actual package
deinstallation, because it helps to understand how the package
deinstallation works:

@enumerate
@item Look for a package name to remove inside of
@samp{$@{packagedir@}}.  Package names must be specified using the full
package name, such as "name-version-arch+release.tlz" or specifying the
package name directory.

@item Ignores some signals up to completing the deinstallation:
HUP INT QUIT ABRT TERM.

@item @emph{graft(1)} is invoked to remove symbolic links from
the package installation directory to the target directory:

If a conflict exists with another package, those links that are not in
conflict will be preserved.  It's possible to prune all the conflicts
using the -p option.

@item Remove directories made empty by package deletion.  This has
effect on @samp{$@{targetdir@}} but not for @samp{$@{packagedir@}}.

@item The package directory is deleted if the option -k is not
supplied.
@end enumerate

@noindent
@emph{Usage:} pkgremove [-hkpV] [-P <DIR>] [-t <DIR>] [package_name ...]

To remove a package, just execute the command:

@example
pkgremove xz-5.2.2-x86_64+1
@end example

To remove multiple versions of the same package:

@example
pkgremove xz*
@end example

To remove multiple packages at once:

@example
pkgremove foo bar baz ...
@end example

Detailed output (very verbose):

@example
pkgremove -V xz-5.2.2-x86_64+1
@end example

Removing from a different directory tree and target:

@example
pkgremove -P /tmp/pkgdir -T /tmp/targetdir lzip-1.17-x86_64+1
@end example

Pruning conflicts:

@example
pkgremove -p -V hunter
@end example

@section Upgrading packages
@cindex upgrading packages

This sort order is particularly useful just before the actual package
upgrade, because it helps to understand how the package upgrade works:

@enumerate
@item Prepare temporary location for the incoming package.

@item Pre-install incoming package into the temporary location.

@item Remove packages under the same name: this is considered
as the old packages. (Default behaviour if -k is not supplied).

@item Upgrade or install the package calling to @command{pkgadd}.

@item Delete temporary location of the package.
@end enumerate

@noindent
@emph{Usage:} pkgupgrade [-hkVw] [-P <DIR>] [-t <DIR>] [package.tlz ...]

Upgrading a package is simple as:

@example
pkgupgrade coreutils-8.25-x86_64+1.tlz
@end example

@noindent
@samp{pkgupgrade} uses @command{pkgadd} and @command{pkgremove} to
upgrade software packages.  So it inherits the properties of each
utility, except here, only the essential options are provided.  For
example, the option -V (for a detailed output) belongs to when these
utilities are invoked.  The options -P and -t work in the same way as
the previous examples for @command{pkgadd}, @command{pkgremove}.
@samp{pkgupgrade} will try to update the package or to install it
(in case it has not been installed).

To see what packages will be updated (if any), always type:

@example
pkgupgrade -w coreutils-8.25-x86_64+1.tlz
@end example

@section Notes
@cindex notes

@itemize @bullet
@item Some signals like HUP INT QUIT ABRT TERM are ignored on the
package installation or deinstallation.  The intention is to ignore
the cancellation while the package is being installed or removed (e.g.
Ctrl+C, terminal window closed, etc.).  The installation or removal
of a package can be crucial for the proper functioning of the system.

@item The meta file is read from the directory where the package is
found.

@item A post-install script is read from
@samp{$@{packagedir@}/package_name/var/lib/qi/post-install/name.install}.

@item Default behavior is to upgrade or install a package removing old
packages, this is "packages found under the same name".  If you want to
preserve the multiple versions of the same package, you must pass the
-k option.
@end itemize


@node Recipes
@chapter Recipes
@cindex recipes

A recipe is a file telling qi what to do.  Most often, the recipe
tells qi how to build a binary package from a source tarball.

A recipe has two parts: a list of variable definitions and a list of
sections.  By convention, the syntax of a section is:

@example
section_name() @{
  section lines
@}
@end example

The section name is followed by parentheses, one space and an opening
brace.  The line finishing the section contains just a closing brace.
The section names or the function names currently recognized are
@samp{build}.

The @samp{build} section is an augmented shell script.  This is the main
section (or @strong{shell function}) which contains the instructions to
build and produce a package.

@section Variables
@cindex variables

A "variable" is a @strong{shell variable} defined either in @file{qirc}
or in a recipe to represent a string of text, called the variable's
"value".  These values are substituted by explicit request in the
definitions of other variables or in calls to external commands.

Variables can represent lists of file names, options to pass to
compilers, programs to run, directories to look in for source files,
directories to write output in, or anything else you can imagine.

Definitions of variables in qi have four levels of precedence.
Options which define variables from the command-line override those
specified in the @file{qirc} file, while variables defined in the recipe
override those specified in @file{qirc}, taking priority over those
variables settled by options via command-line.  Finally, some variables
(arch, jobs, outdir, worktree, tardir, netget, rsync) have default
values if they are not defined anywhere.

Options that set variables through the command-line can only reference
variables defined in @file{qirc} and variables with default values.

Definitions of variables in @file{qirc} can only reference variables
previously defined in @file{qirc} and variables with default values.

Definitions of variables in the recipe can only reference variables
settled by command-line, variables previously defined in the recipe,
variables defined in @file{qirc}, and variables with default values.

@subsection Special variables
@cindex special variables

The three variables @samp{arch}, @samp{jobs}, and @samp{outdir} can
only be set using command line options or in @file{qirc}.  If not
specified, they have default values.

  @samp{arch} is the architecture to compose the package name.  Its
value is available in the recipe as @samp{$@{arch@}}.  Default value is
the output of @samp{uname -m}.

  @samp{jobs} is the number of jobs to pass to the compiler.  Its
default value is available in the recipe as @samp{$@{jobs@}}.  Defaults
to @samp{1}.

  @samp{outdir} is the directory where the produced packages are
written.  This variable cannot be redefined in the recipe.  Defaults to
@samp{/var/cache/qi/packages}.

  @samp{worktree} is the working tree where archives, patches, and
recipes are expected.  This variable cannot be redefined in the
recipe.  Defaults to @samp{/usr/src/qi}.

  The variable @samp{tardir} is defined in the recipe to the directory
where the tarball containing the source can be found.  The full name of
the tarball is commonly used as @samp{$@{tardir@}/$tarname}.  A value
of @samp{.} for @samp{tardir} sets it to the value of the CWD (Current
Working Directory), this means, from where the recipe is located.

  The two variables @samp{srcdir} and @samp{destdir} can be defined in
the recipe, as any other variable, but if they are not, Qi uses default
values for them when building the package.

@samp{srcdir} contains the source code to be compiled, and defaults to
@samp{$@{program@}-$@{version@}}.

@samp{destdir} is the place where the built package will be installed,
and defaults to @samp{$@{TMPDIR@}/package-$@{program@}}.

  If @samp{pkgname} is left undefined, the special variable
@samp{program} is assigned by default.  If @samp{pkgversion} is left
undefined, the special variable @samp{version} is assigned by default.

  @samp{pkgname}, @samp{pkgversion}, along with @samp{version},
@samp{arch}, and @samp{release}, are used to produce the name of the
package in the form
@samp{$@{pkgname@}-$@{pkgversion@}-$@{arch@}+$@{release@}.tlz}.  All of
them must be defined in the recipe, excepting @samp{arch}, which is
optional.

@itemize @bullet
@item @samp{program}: name of the package.

@item @samp{version}: version of the package.

@item @samp{arch}: architecture of the package.

@item @samp{release}: release number of the package. It is recommended to 
increase this number after any significant change in the recipe is made.
@end itemize

@noindent
Obtaining sources over the network must be declared in the recipe using
the @samp{fetch} variable.  Use double quotes for separated values.

  The variables @samp{netget} and @samp{rsync} can be defined in
@file{qirc} to establish a network downloader in order to get the
sources.  If they are not defined, qi uses default values:

@samp{netget} is the general network downloader tool for use, and
defaults to @samp{wget -c -w1 -t3 --no-check-certificate}.

@samp{rsync} is the network tool for sources containing the prefix for
the RSYNC protocol, and defaults to
@samp{rsync -v -a -L -z -i --progress}.

@noindent
There are three important variables to produce meta information of the
package: @samp{description}, @samp{homepage}, @samp{license}.

  The variable @samp{description} is special to write the description of the
package, which will be shown when installed.

  A description has two parts: a brief description and a long
description.  By convention, the syntax of a description is:

@example
description="
Brief description.

Long description.
"
@end example

@noindent
The first (substantial) line of the value is a brief description of the
software (called the "blurb").  A new (blank) line is followed to
separate the brief description from the long description.

An example looks like:

@example
description="
A source builder and a package manager.

Qi is a source builder and a package manager.  It contains a set of
tools to build, install, remove, and upgrade software packages.

Qi follows the philosophy of the simplicity without adding too many
features, such as those that can be found in popular package managers.
Basically it does two things: builds packages and manages them.
"
@end example

@itemize @bullet
@item Consider a length limit of 78 characters as maximum.
@xref{Recipes, The meta file}.
@end itemize

@noindent
The @samp{homepage} variable is used simply to declare the main site or
home of the source, thus:

@example
homepage=http://www.dragora.org
@end example

@noindent
The variable @samp{license} is used for license information@footnote{
The proposal for @samp{license} was made by Richard M. Stallman at
@url{http://lists.gnu.org/archive/html/gnu-linux-libre/2016-05/msg00003.html}.}.
Some code in the program can be covered by license A, license B, or
license C.  For "separate licensing" or "heterogeneous licensing",
we suggest using @strong{|} for a disjunction, @strong{&} for a
conjunction (if that ever happens in a significant way), and comma
for heterogeneous licensing.  Comma would have lower precedence.  Plus
added special terms.

@example
license="LGPL, GPL | Artistic, GPL + added permission"
@end example

@subsection Variables from the environment
@cindex variables from the environment

The variables @env{QICFLAGS}, @env{QICXXFLAGS}, and @env{QILDFLAGS} have
no effect by default.  The environment variables such as @env{CFLAGS},
@env{CXXFLAGS}, and @env{LDFLAGS} are unset at compile time.

Recommended practices is to set variables in front of @samp{configure}
or in front of @emph{make(1)} instead of exporting to the environment.
As follows:

@quotation
Variables not defined in a site shell script can be set in the
environment passed to configure. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the configure command line, using @samp{VAR=value}.  For
example:

@code{./configure CC=/usr/local2/bin/gcc}

@url{http://gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Defining-Variables.html}
@end quotation

@quotation
Indeed, while configure can notice the definition of CC in @samp{./configure
CC=bizarre-cc}, it is impossible to notice it in @samp{CC=bizarre-cc
./configure}, which, unfortunately, is what most users do.

[...]

configure: error: changes in the environment can compromise the build.

@url{http://gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Setting-Output-Variables.html}
@end quotation

@quotation
It is not wise for makefiles to depend for their functioning on
environment variables set up outside their control, since this would
cause different users to get different results from the same makefile.
This is against the whole purpose of most makefiles. 

@url{http://gnu.org/software/make/manual/make.html#Environment}
@end quotation

@section The meta file
@cindex the meta file

The "meta file" is an external file created by @command{pkgbuild} when
a recipe is processed and when a package is produced.  The file is
generated as @samp{$@{full_pkgname@}.tlz.txt} which contains
information about the package such as @samp{program}, @samp{version},
@samp{release}.  Also definitions of the special variables
@samp{fetch}, @samp{description}, @samp{homepage}, @samp{license}.

A meta file has the purpose to extract information and the purpose to
reflect essential information to the user without having to check
inside the package itself.

The meta file is basically composed as:

@example
# Description

variable=value
...
@end example

@noindent
The description is extracted from the declared variable
@samp{description}, where each line is interpreted literally and where
the description is pre-formatted to fit in (exactly) 80 columns.  Plus
@samp{# } is prepend to each line.

Followed by new line, the rest is composed by variables; the inclusion
of its values, may vary.  For example, in addition to the special
variables, there are implicit variables such as @samp{blurb},
@samp{depends}.

  The @samp{blurb} variable is related to the special variable
@samp{description}.  Always taking the first (substantial) line
or "brief description".

  The value of @samp{depends} only will be included if the
@file{depends} file is a regular file.  @xref{Order files, The depends
file}.

@noindent
Now let's take a look on a real example of a meta file:

@example
# A lossless data compressor based on the LZMA algorithm.
# 
# Clzip is a lossless data compressor with a user interface similar to
# the one of gzip or bzip2.  Clzip is about as fast as gzip, compresses
# most files more than bzip2, and is better than both from a data
# recovery perspective.
# 
# Clzip uses the lzip file format; the files produced by clzip are fully
# compatible with lzip-1.4 or newer, and can be rescued with lziprecover.
# 
# Clzip is in fact a C language version of lzip, intended for embedded
# devices or systems lacking a C++ compiler.

QICFLAGS="-g0 -Os"
QICXXFLAGS="-g0 -Os"
QILDFLAGS="-s"
program=clzip
version=1.8
release=1
blurb="A lossless data compressor based on the LZMA algorithm."
homepage="http://lzip.nongnu.org/clzip.html"
license="GPLv2+"
fetch="http://download.savannah.gnu.org/releases/lzip/clzip/clzip-1.8.tar.gz"
depends=" "

@end example

Creation of the meta file is made in @samp{$@{outdir@}}.

@section Building packages
@cindex building packages

This sort order is particularly useful just before the actual package
build, because it helps to understand how a package is being built:

@enumerate
@item A recipe is read from the current directory, if not, it will be
looked in @samp{$@{worktree@}/recipes}.  Names of recipes can be
invoked relative to @samp{$@{worktree@}/recipes}.  The recipe must be
a regular file and must be readable by the user who is running the
command.

@item Checks are made when the recipe is imported (included), essential
variable names cannot be empty: @samp{program}, @samp{version},
@samp{release}.  Also the main function @samp{build()} must be present.

@item @command{pkgbuild} tries to obtain the sources remotely if it
does not exist locally (@samp{$@{tardir@}}).  Once the source is
already in place, its timestamp is updated, creating or updating the
SHA1 sum.

@item Required directories are created: @samp{$@{TMPDIR@}/$srcdir},
@samp{$@{outdir@}}, @samp{$@{destdir@}/var/lib/qi/recipes}.

@item Sane ownerships and permissions are applied to the full source
directory: @samp{$@{TMPDIR@}/$srcdir}.

@item The main function @samp{build()} is called.  Exits immediately if
a command exits with a non-zero status.

@item A package is going to be created under the following conditions:

@itemize @bullet
@item If @samp{$@{destdir@}} is not empty.

@item If the option -n was not given.
@end itemize

A copy of the recipe (file) is included on
@samp{$@{destdir@}/var/lib/qi/recipes} as @samp{$@{full_pkgname@}.recipe}.

If the @file{post-install} script is in the current working directory
or from where the recipe name resides, it will be added as
@samp{$@{destdir@}/var/lib/qi/post-install/$@{full_pkgname@}.install}.

The package is produced from the content of @samp{$@{destdir@}}.  First,
creating a tarball, and then compressing it using the maximum level of
compression of @emph{lzip(1)}.

@item By default, directories like @samp{$@{TMPDIR@}/$srcdir} and
@samp{$@{destdir@}} are deleted.

@item If the option -U is given, @command{pkgupgrade} is invoked to
install or upgrade the package.

@end enumerate

@noindent
@emph{Usage:} pkgbuild [-hiknU] [-a <ARCH>] [-j <JOBS>] [-o <DIR>] [recipe ...]

To build a single package, simply type:

@example
pkgbuild clzip.recipe
@end example

Compile passing parallel jobs to the compiler for speed up the process:

@example
pkgbuild -j4 clzip.recipe
@end example

To build and install or upgrade multiple packages at once:

@example
pkgbuild -U clzip.recipe zutils.recipe matias.recipe
@end example

Reading recipes and building from the output of a command:

@example
cat depends | pkgbuild -
@end example

Incrementing the release number after a significant change in a recipe:
@example
pkgbuild -i stargazer.recipe
@end example

@noindent
If the recipe name cannot be read from the current directory or from
a specific path name, @samp{$@{worktree@}/recipes} is used for the
search:

There is a special case for the names of recipes @samp{recipe}.
@command{pkgbuild} can complete the recipe name without being required
to be specified in the command-line, only if the name of the recipe is
@samp{recipe}.  For example:

@example
pkgbuild devel/gcc
@end example

Will complete the search as @samp{$@{worktree@}/recipes/devel/gcc/recipe}.

@section Writing recipes
@cindex writing recipes

@subsection Internal functions
@cindex internal functions

Some internal functions are available to be applied on the recipe:

@table @samp

@item unpack()
The unpack function can decompress multiple (compressed) files while
verifies the integrity.  Depending on where the function is called,
the decompression occurs in the current working directory.

Usage: @code{unpack file(s) ...}

The cases supported for the special extensions are: *.tar, *.tar.*,
*.tgz*, *.tbz*, *.tlz*, *.txz*, *.zip, *.ZIP, *.gz, *.bz2, *.lz.
@end table


@node Order files
@chapter Order files
@cindex .order files

@command{pkgorder} has the purpose to resolve the build order through
.order files.  In other words, is a good complement for
@command{pkgbuild}.

@noindent
@emph{Usage:} pkgorder [-x] [file_name.order ...]

@noindent
Basically, @command{pkgorder} reads from a declared file which ends in
".order".  The output is an ordered list of recipe names which can be
passed to @command{pkgbuild} (via a pipe) to build a number or a series
of packages.

@sc{Declaration}

If 'a' depends on 'b' and 'c', and 'c' depends on 'b' as well, the file
might look like:

@example
a.recipe: c.recipe b.recipe
b.recipe:
c.recipe: b.recipe
@end example

Each letter represents a recipe name, complete dependencies for
the first recipe name are listed in descending order, which is
printed from right to left, and removed from left to right:

@sc{Output}

@example
b.recipe
c.recipe
a.recipe
@end example

@itemize @bullet
@item Commented lines starting with a '#' are allowed.  Blank lines,
colons, parentheses, and end of line are removed.
@end itemize

@section The depends file
@cindex the depends file

When @command{pkgorder} read from an order file; by default, it will
proceed to read the dependencies of each recipe.  This behavior can be
omitted if the -x option is given.

  The procedure for reading the dependencies of each recipe is
extracting the directory location where the order file resides.  Then
it iterates over the declared items extracting its location in search
of the special file @file{depends}.

@itemize @bullet
@item The @file{depends} file only is read (sequentially) if it is
a regular file and is not empty.
@end itemize

@noindent
The special file @file{depends} must contain a list of prerequisites
for the recipe.  Prerequisites are names of valid recipes, including
its location.  The location must be relative to @samp{$@{worktree@}}
(variable described in @ref{Recipes}).

Example of a @file{depends} file declared for @emph{bash.recipe}:

@example
libs/readline/readline.recipe
@end example

Then, if @emph{core/bash/bash.recipe} has been declared on
@emph{core.order}, the output would be:

@example
...
libs/readline/readline.recipe
core/bash/bash.recipe
...
@end example

Combined in a pipe, @emph{readline} represents the first dependency
of @emph{bash}:

@example
@code{pkgorder core.order | pkgbuild -U -}
@end example


@node Examine packages
@chapter Examine packages
@cindex examine packages

@command{pkgerupt} is a special command to examine packages for
debugging purposes.

@noindent
@emph{Usage:} pkgerupt [-h] [package.tlz ...]

When a package name is given @command{pkgerupt} will create a random
directory for the package.  The prefix directory where the random
directory is created is controlled by the @env{TMPDIR} variable,
by default @env{TMPDIR} is assigned to @emph{/tmp}.  Creation mode
is "u=,g=rwx,o=rwx" (0700).

The extraction to inspecting a package is equivalent to the shell
instruction:

@example
@code{( umask 000 && cd -- $PRVDIR && lzip -cd - | tar -xf - ) < $file}
@end example

The package content is decompressed in the random (private) directory
via pipe.  Creation mode is "u=rwx,g=rwx,o=rwx" (0777).

  If there is any substantial change, consider increasing the build
number when repackaging: edit the value of the @samp{release} variable
(recipe), compose the output file using the new number.


@node Messages
@chapter Messages
@cindex output messages

Some symbols are used for output messages to help to identify
the messages shown by the tools in Qi.  There are four simple
categories where the symbols are represented:

@sp 1
@noindent
@strong{Specifics}

This symbols are unique to identify the running tool:

@table @samp
@item +
This symbol belongs to the @command{pkgadd} tool.

@item -
This symbol belongs to the @command{pkgremove} tool.

@item ~
This symbol belongs to the @command{pkgupgrade} tool.

@item #
This symbol belongs to the @command{pkgbuild} tool.

@item =
This symbol belongs to the @command{pkgerupt} tool.

@item %
This symbol is used to scan a package or to warn when
the option is used.

Specific symbols are enclosed between @samp{( )}.
@end table

@table @samp
@strong{Preventive}

Preventive symbols are intended to alert the user about unforeseen
or important situations, and to meet requirements before proceeding:

@item *
Normally used for testing compressed sources, obtain remote sources,
or set system permissions.

Preventive symbols are enclosed between @samp{[ ]}.
@end table

@table @samp
@strong{Informative}

Informative symbols are intended to inform users the most essential
tasks during the execution:

@item i
Symbol used when a task is going to be performed or when a task has
been completed.

@item !
This symbol informs about deleting files.

Informative symbols are enclosed between @samp{[ ]}.
@end table

@strong{Transitory}

Transitory symbols are part for occasional changes (@samp{@@}) but no
less important.  Also to invoke Qi tools externally (@samp{^}).

Transitory symbols are enclosed between @samp{@{ @}}.


@node Exit status
@chapter Exit status
@cindex exit codes

All the conditions of exit codes are described in this chapter.

@table @samp

@item 0
Successful completion (no errors).

@item 1
@strong{Minor common errors:}

@itemize @minus
@item Illegal option.

@item Option requires an argument.

@item Internal function to load not found.

@item Program (prerequisite) is not available.
@end itemize

@item 2
@strong{Command execution error}

Evaluation of external commands or shell arguments.  If it fails,
returns 2.

@item 3
@strong{Integrity check error for compressed files}

Compressed files means:

@itemize @minus
@item All the tarballs supported by @emph{tar(1)}.

@item Zip files supported by @emph{unzip(1)}.

@item Gzip files supported by @emph{gzip(1)}.

@item Bzip2 files supported by @emph{bzip2(1)}.

@item Lzip files supported by @emph{lzip(1)}.
@end itemize

@item 4
@strong{File empty, not regular, or expected}

Commonly, it is expected:

@itemize @minus
@item A binary package (.tlz).

@item An installed package to remove.

@item A recipe file.

@item A file of order (.order).
@end itemize

@item 5
@strong{Empty or not defined variable}

This exit code is used for reporting about empty or undefined variables.
Usually, variables of the recipe or assigned arrays that are tested.

@item 6
@strong{Package already installed}

The package directory for an incoming package already exists.

@item 10
@strong{Network manager error}

Exit status from the execution of the network manager tool and its
arguments.
@end table

@noindent
@cartouche
Error messages are reported to the standard error.
@end cartouche


@node GNU Free Documentation License
@appendix GNU Free Documentation License

@include fdl.texi


@node Index
@unnumbered Index

@printindex cp

@bye