Project home: https://bues.ch/ Original repository at: https://git.bues.ch/git/simplepwm.git
Michael Buesch
cf1869c3fe
Move schematics
|
4 gadi atpakaļ | |
|---|---|---|
| firmware | 4 gadi atpakaļ | |
| schematics-attiny | 4 gadi atpakaļ | |
| .gitignore | 4 gadi atpakaļ | |
| COPYING | 6 gadi atpakaļ | |
| README.rst | 4 gadi atpakaļ | |
| battery_drop_curve.ods | 4 gadi atpakaļ | |
| brightness_curve.ods | 4 gadi atpakaļ | |
| makerelease.sh | 4 gadi atpakaļ | |
| version.txt | 4 gadi atpakaļ |
README.rst
Simple PWM controller
=====================
`https://bues.ch/cgit/simplepwm.git/ `_
Simplepwm is a small PWM brightness controller for LED lamps.
Microcontroller
===============
Simplepwm supports these microcontrollers:
Atmel/Microchip ATTiny 25/45/85:
* Full feature set.
Atmel/Microchip ATTiny 13:
* Reduced feature set.
* No battery power saving.
* No battery voltage monitoring.
Hardware schematics
===================
See `schematics/simplepwm.pdf `_
Prebuilt firmware images
========================
The release archives of simplepwm contain prebuilt `.hex` files for all supported microcontrollers in the `hex` directory. These hex files can be flashed directly to the microcontroller with a any tool of your choice (e.g. Atmel Studio or avrdude).
The corresponding fuse settings can be found in the file `fuses.txt` in the same directory.
Building the firmware
=====================
The firmware build needs the following tool chain:
* Unix-like operating system
* GNU make
* AVR GCC
* AVR Binutils
* avrdude
Run the following commands to build the firmware:
.. code:: sh
cd firmware
make DEV=t85
Please specify the target microcontroller using the DEV variable as shown above.
Valid values are:
* ATTiny 13: `DEV=t13`
* ATTiny 25: `DEV=t25`
* ATTiny 45: `DEV=t45`
* ATTiny 85: `DEV=t85`
Flashing the firmware after build
=================================
Run the following commands to flash the firmware to the target microcontroller:
.. code:: sh
cd firmware
make DEV=t85 print_fuses
make DEV=t85 write_fuses
make DEV=t85 write_mem
Or alternatively use any other of the available AVR flashing tools to program the .hex file and fuses.
License
=======
Copyright (c) 2018-2020 Michael Buesch
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
=====================
`https://bues.ch/cgit/simplepwm.git/ `_
Simplepwm is a small PWM brightness controller for LED lamps.
Microcontroller
===============
Simplepwm supports these microcontrollers:
Atmel/Microchip ATTiny 25/45/85:
* Full feature set.
Atmel/Microchip ATTiny 13:
* Reduced feature set.
* No battery power saving.
* No battery voltage monitoring.
Hardware schematics
===================
See `schematics/simplepwm.pdf `_
Prebuilt firmware images
========================
The release archives of simplepwm contain prebuilt `.hex` files for all supported microcontrollers in the `hex` directory. These hex files can be flashed directly to the microcontroller with a any tool of your choice (e.g. Atmel Studio or avrdude).
The corresponding fuse settings can be found in the file `fuses.txt` in the same directory.
Building the firmware
=====================
The firmware build needs the following tool chain:
* Unix-like operating system
* GNU make
* AVR GCC
* AVR Binutils
* avrdude
Run the following commands to build the firmware:
.. code:: sh
cd firmware
make DEV=t85
Please specify the target microcontroller using the DEV variable as shown above.
Valid values are:
* ATTiny 13: `DEV=t13`
* ATTiny 25: `DEV=t25`
* ATTiny 45: `DEV=t45`
* ATTiny 85: `DEV=t85`
Flashing the firmware after build
=================================
Run the following commands to flash the firmware to the target microcontroller:
.. code:: sh
cd firmware
make DEV=t85 print_fuses
make DEV=t85 write_fuses
make DEV=t85 write_mem
Or alternatively use any other of the available AVR flashing tools to program the .hex file and fuses.
License
=======
Copyright (c) 2018-2020 Michael Buesch
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.