fsl-mph-dr-of.c 7.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304
  1. /*
  2. * Setup platform devices needed by the Freescale multi-port host
  3. * and/or dual-role USB controller modules based on the description
  4. * in flat device tree.
  5. *
  6. * This program is free software; you can redistribute it and/or modify it
  7. * under the terms of the GNU General Public License as published by the
  8. * Free Software Foundation; either version 2 of the License, or (at your
  9. * option) any later version.
  10. */
  11. #include <linux/kernel.h>
  12. #include <linux/platform_device.h>
  13. #include <linux/fsl_devices.h>
  14. #include <linux/err.h>
  15. #include <linux/io.h>
  16. #include <linux/of_platform.h>
  17. #include <linux/clk.h>
  18. #include <linux/module.h>
  19. struct fsl_usb2_dev_data {
  20. char *dr_mode; /* controller mode */
  21. char *drivers[3]; /* drivers to instantiate for this mode */
  22. enum fsl_usb2_operating_modes op_mode; /* operating mode */
  23. };
  24. struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
  25. {
  26. .dr_mode = "host",
  27. .drivers = { "fsl-ehci", NULL, NULL, },
  28. .op_mode = FSL_USB2_DR_HOST,
  29. },
  30. {
  31. .dr_mode = "otg",
  32. .drivers = { "fsl-usb2-otg", "fsl-ehci", "fsl-usb2-udc", },
  33. .op_mode = FSL_USB2_DR_OTG,
  34. },
  35. {
  36. .dr_mode = "peripheral",
  37. .drivers = { "fsl-usb2-udc", NULL, NULL, },
  38. .op_mode = FSL_USB2_DR_DEVICE,
  39. },
  40. };
  41. struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
  42. {
  43. const unsigned char *prop;
  44. int i;
  45. prop = of_get_property(np, "dr_mode", NULL);
  46. if (prop) {
  47. for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) {
  48. if (!strcmp(prop, dr_mode_data[i].dr_mode))
  49. return &dr_mode_data[i];
  50. }
  51. }
  52. pr_warn("%s: Invalid 'dr_mode' property, fallback to host mode\n",
  53. np->full_name);
  54. return &dr_mode_data[0]; /* mode not specified, use host */
  55. }
  56. static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
  57. {
  58. if (!phy_type)
  59. return FSL_USB2_PHY_NONE;
  60. if (!strcasecmp(phy_type, "ulpi"))
  61. return FSL_USB2_PHY_ULPI;
  62. if (!strcasecmp(phy_type, "utmi"))
  63. return FSL_USB2_PHY_UTMI;
  64. if (!strcasecmp(phy_type, "utmi_wide"))
  65. return FSL_USB2_PHY_UTMI_WIDE;
  66. if (!strcasecmp(phy_type, "serial"))
  67. return FSL_USB2_PHY_SERIAL;
  68. return FSL_USB2_PHY_NONE;
  69. }
  70. struct platform_device * __devinit fsl_usb2_device_register(
  71. struct platform_device *ofdev,
  72. struct fsl_usb2_platform_data *pdata,
  73. const char *name, int id)
  74. {
  75. struct platform_device *pdev;
  76. const struct resource *res = ofdev->resource;
  77. unsigned int num = ofdev->num_resources;
  78. int retval;
  79. pdev = platform_device_alloc(name, id);
  80. if (!pdev) {
  81. retval = -ENOMEM;
  82. goto error;
  83. }
  84. pdev->dev.parent = &ofdev->dev;
  85. pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
  86. *pdev->dev.dma_mask = *ofdev->dev.dma_mask;
  87. retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
  88. if (retval)
  89. goto error;
  90. if (num) {
  91. retval = platform_device_add_resources(pdev, res, num);
  92. if (retval)
  93. goto error;
  94. }
  95. retval = platform_device_add(pdev);
  96. if (retval)
  97. goto error;
  98. return pdev;
  99. error:
  100. platform_device_put(pdev);
  101. return ERR_PTR(retval);
  102. }
  103. static const struct of_device_id fsl_usb2_mph_dr_of_match[];
  104. static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
  105. {
  106. struct device_node *np = ofdev->dev.of_node;
  107. struct platform_device *usb_dev;
  108. struct fsl_usb2_platform_data data, *pdata;
  109. struct fsl_usb2_dev_data *dev_data;
  110. const struct of_device_id *match;
  111. const unsigned char *prop;
  112. static unsigned int idx;
  113. int i;
  114. if (!of_device_is_available(np))
  115. return -ENODEV;
  116. match = of_match_device(fsl_usb2_mph_dr_of_match, &ofdev->dev);
  117. if (!match)
  118. return -ENODEV;
  119. pdata = &data;
  120. if (match->data)
  121. memcpy(pdata, match->data, sizeof(data));
  122. else
  123. memset(pdata, 0, sizeof(data));
  124. dev_data = get_dr_mode_data(np);
  125. if (of_device_is_compatible(np, "fsl-usb2-mph")) {
  126. if (of_get_property(np, "port0", NULL))
  127. pdata->port_enables |= FSL_USB2_PORT0_ENABLED;
  128. if (of_get_property(np, "port1", NULL))
  129. pdata->port_enables |= FSL_USB2_PORT1_ENABLED;
  130. pdata->operating_mode = FSL_USB2_MPH_HOST;
  131. } else {
  132. if (of_get_property(np, "fsl,invert-drvvbus", NULL))
  133. pdata->invert_drvvbus = 1;
  134. if (of_get_property(np, "fsl,invert-pwr-fault", NULL))
  135. pdata->invert_pwr_fault = 1;
  136. /* setup mode selected in the device tree */
  137. pdata->operating_mode = dev_data->op_mode;
  138. }
  139. prop = of_get_property(np, "phy_type", NULL);
  140. pdata->phy_mode = determine_usb_phy(prop);
  141. for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {
  142. if (!dev_data->drivers[i])
  143. continue;
  144. usb_dev = fsl_usb2_device_register(ofdev, pdata,
  145. dev_data->drivers[i], idx);
  146. if (IS_ERR(usb_dev)) {
  147. dev_err(&ofdev->dev, "Can't register usb device\n");
  148. return PTR_ERR(usb_dev);
  149. }
  150. }
  151. idx++;
  152. return 0;
  153. }
  154. static int __devexit __unregister_subdev(struct device *dev, void *d)
  155. {
  156. platform_device_unregister(to_platform_device(dev));
  157. return 0;
  158. }
  159. static int __devexit fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
  160. {
  161. device_for_each_child(&ofdev->dev, NULL, __unregister_subdev);
  162. return 0;
  163. }
  164. #ifdef CONFIG_PPC_MPC512x
  165. #define USBGENCTRL 0x200 /* NOTE: big endian */
  166. #define GC_WU_INT_CLR (1 << 5) /* Wakeup int clear */
  167. #define GC_ULPI_SEL (1 << 4) /* ULPI i/f select (usb0 only)*/
  168. #define GC_PPP (1 << 3) /* Inv. Port Power Polarity */
  169. #define GC_PFP (1 << 2) /* Inv. Power Fault Polarity */
  170. #define GC_WU_ULPI_EN (1 << 1) /* Wakeup on ULPI event */
  171. #define GC_WU_IE (1 << 1) /* Wakeup interrupt enable */
  172. #define ISIPHYCTRL 0x204 /* NOTE: big endian */
  173. #define PHYCTRL_PHYE (1 << 4) /* On-chip UTMI PHY enable */
  174. #define PHYCTRL_BSENH (1 << 3) /* Bit Stuff Enable High */
  175. #define PHYCTRL_BSEN (1 << 2) /* Bit Stuff Enable */
  176. #define PHYCTRL_LSFE (1 << 1) /* Line State Filter Enable */
  177. #define PHYCTRL_PXE (1 << 0) /* PHY oscillator enable */
  178. int fsl_usb2_mpc5121_init(struct platform_device *pdev)
  179. {
  180. struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
  181. struct clk *clk;
  182. char clk_name[10];
  183. int base, clk_num;
  184. base = pdev->resource->start & 0xf000;
  185. if (base == 0x3000)
  186. clk_num = 1;
  187. else if (base == 0x4000)
  188. clk_num = 2;
  189. else
  190. return -ENODEV;
  191. snprintf(clk_name, sizeof(clk_name), "usb%d_clk", clk_num);
  192. clk = clk_get(&pdev->dev, clk_name);
  193. if (IS_ERR(clk)) {
  194. dev_err(&pdev->dev, "failed to get clk\n");
  195. return PTR_ERR(clk);
  196. }
  197. clk_enable(clk);
  198. pdata->clk = clk;
  199. if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
  200. u32 reg = 0;
  201. if (pdata->invert_drvvbus)
  202. reg |= GC_PPP;
  203. if (pdata->invert_pwr_fault)
  204. reg |= GC_PFP;
  205. out_be32(pdata->regs + ISIPHYCTRL, PHYCTRL_PHYE | PHYCTRL_PXE);
  206. out_be32(pdata->regs + USBGENCTRL, reg);
  207. }
  208. return 0;
  209. }
  210. static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
  211. {
  212. struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
  213. pdata->regs = NULL;
  214. if (pdata->clk) {
  215. clk_disable(pdata->clk);
  216. clk_put(pdata->clk);
  217. }
  218. }
  219. static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
  220. .big_endian_desc = 1,
  221. .big_endian_mmio = 1,
  222. .es = 1,
  223. .have_sysif_regs = 0,
  224. .le_setup_buf = 1,
  225. .init = fsl_usb2_mpc5121_init,
  226. .exit = fsl_usb2_mpc5121_exit,
  227. };
  228. #endif /* CONFIG_PPC_MPC512x */
  229. static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
  230. .have_sysif_regs = 1,
  231. };
  232. static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
  233. { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
  234. { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
  235. #ifdef CONFIG_PPC_MPC512x
  236. { .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
  237. #endif
  238. {},
  239. };
  240. static struct platform_driver fsl_usb2_mph_dr_driver = {
  241. .driver = {
  242. .name = "fsl-usb2-mph-dr",
  243. .owner = THIS_MODULE,
  244. .of_match_table = fsl_usb2_mph_dr_of_match,
  245. },
  246. .probe = fsl_usb2_mph_dr_of_probe,
  247. .remove = __devexit_p(fsl_usb2_mph_dr_of_remove),
  248. };
  249. module_platform_driver(fsl_usb2_mph_dr_driver);
  250. MODULE_DESCRIPTION("FSL MPH DR OF devices driver");
  251. MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
  252. MODULE_LICENSE("GPL");