123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379 |
- /*
- * This file is part of wl1271
- *
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
- #include <linux/irq.h>
- #include <linux/module.h>
- #include <linux/vmalloc.h>
- #include <linux/platform_device.h>
- #include <linux/mmc/sdio_func.h>
- #include <linux/mmc/sdio_ids.h>
- #include <linux/mmc/card.h>
- #include <linux/mmc/host.h>
- #include <linux/gpio.h>
- #include <linux/wl12xx.h>
- #include <linux/pm_runtime.h>
- #include "wl12xx.h"
- #include "wl12xx_80211.h"
- #include "io.h"
- #ifndef SDIO_VENDOR_ID_TI
- #define SDIO_VENDOR_ID_TI 0x0097
- #endif
- #ifndef SDIO_DEVICE_ID_TI_WL1271
- #define SDIO_DEVICE_ID_TI_WL1271 0x4076
- #endif
- struct wl12xx_sdio_glue {
- struct device *dev;
- struct platform_device *core;
- };
- static const struct sdio_device_id wl1271_devices[] __devinitconst = {
- { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
- {}
- };
- MODULE_DEVICE_TABLE(sdio, wl1271_devices);
- static void wl1271_sdio_set_block_size(struct device *child,
- unsigned int blksz)
- {
- struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
- struct sdio_func *func = dev_to_sdio_func(glue->dev);
- sdio_claim_host(func);
- sdio_set_block_size(func, blksz);
- sdio_release_host(func);
- }
- static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
- size_t len, bool fixed)
- {
- int ret;
- struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
- struct sdio_func *func = dev_to_sdio_func(glue->dev);
- sdio_claim_host(func);
- if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
- ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
- dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
- addr, ((u8 *)buf)[0]);
- } else {
- if (fixed)
- ret = sdio_readsb(func, buf, addr, len);
- else
- ret = sdio_memcpy_fromio(func, buf, addr, len);
- dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n",
- addr, len);
- }
- sdio_release_host(func);
- if (ret)
- dev_err(child->parent, "sdio read failed (%d)\n", ret);
- }
- static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
- size_t len, bool fixed)
- {
- int ret;
- struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
- struct sdio_func *func = dev_to_sdio_func(glue->dev);
- sdio_claim_host(func);
- if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
- sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
- dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n",
- addr, ((u8 *)buf)[0]);
- } else {
- dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n",
- addr, len);
- if (fixed)
- ret = sdio_writesb(func, addr, buf, len);
- else
- ret = sdio_memcpy_toio(func, addr, buf, len);
- }
- sdio_release_host(func);
- if (ret)
- dev_err(child->parent, "sdio write failed (%d)\n", ret);
- }
- static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
- {
- int ret;
- struct sdio_func *func = dev_to_sdio_func(glue->dev);
- /* If enabled, tell runtime PM not to power off the card */
- if (pm_runtime_enabled(&func->dev)) {
- ret = pm_runtime_get_sync(&func->dev);
- if (ret < 0)
- goto out;
- } else {
- /* Runtime PM is disabled: power up the card manually */
- ret = mmc_power_restore_host(func->card->host);
- if (ret < 0)
- goto out;
- }
- sdio_claim_host(func);
- sdio_enable_func(func);
- sdio_release_host(func);
- out:
- return ret;
- }
- static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
- {
- int ret;
- struct sdio_func *func = dev_to_sdio_func(glue->dev);
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
- /* Power off the card manually, even if runtime PM is enabled. */
- ret = mmc_power_save_host(func->card->host);
- if (ret < 0)
- return ret;
- /* If enabled, let runtime PM know the card is powered off */
- if (pm_runtime_enabled(&func->dev))
- ret = pm_runtime_put_sync(&func->dev);
- return ret;
- }
- static int wl12xx_sdio_set_power(struct device *child, bool enable)
- {
- struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
- if (enable)
- return wl12xx_sdio_power_on(glue);
- else
- return wl12xx_sdio_power_off(glue);
- }
- static struct wl1271_if_operations sdio_ops = {
- .read = wl12xx_sdio_raw_read,
- .write = wl12xx_sdio_raw_write,
- .power = wl12xx_sdio_set_power,
- .set_block_size = wl1271_sdio_set_block_size,
- };
- static int __devinit wl1271_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
- {
- struct wl12xx_platform_data *wlan_data;
- struct wl12xx_sdio_glue *glue;
- struct resource res[1];
- mmc_pm_flag_t mmcflags;
- int ret = -ENOMEM;
- /* We are only able to handle the wlan function */
- if (func->num != 0x02)
- return -ENODEV;
- glue = kzalloc(sizeof(*glue), GFP_KERNEL);
- if (!glue) {
- dev_err(&func->dev, "can't allocate glue\n");
- goto out;
- }
- glue->dev = &func->dev;
- /* Grab access to FN0 for ELP reg. */
- func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
- /* Use block mode for transferring over one block size of data */
- func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
- wlan_data = wl12xx_get_platform_data();
- if (IS_ERR(wlan_data)) {
- ret = PTR_ERR(wlan_data);
- dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
- goto out_free_glue;
- }
- /* if sdio can keep power while host is suspended, enable wow */
- mmcflags = sdio_get_host_pm_caps(func);
- dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
- if (mmcflags & MMC_PM_KEEP_POWER)
- wlan_data->pwr_in_suspend = true;
- wlan_data->ops = &sdio_ops;
- sdio_set_drvdata(func, glue);
- /* Tell PM core that we don't need the card to be powered now */
- pm_runtime_put_noidle(&func->dev);
- glue->core = platform_device_alloc("wl12xx", -1);
- if (!glue->core) {
- dev_err(glue->dev, "can't allocate platform_device");
- ret = -ENOMEM;
- goto out_free_glue;
- }
- glue->core->dev.parent = &func->dev;
- memset(res, 0x00, sizeof(res));
- res[0].start = wlan_data->irq;
- res[0].flags = IORESOURCE_IRQ;
- res[0].name = "irq";
- ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
- if (ret) {
- dev_err(glue->dev, "can't add resources\n");
- goto out_dev_put;
- }
- ret = platform_device_add_data(glue->core, wlan_data,
- sizeof(*wlan_data));
- if (ret) {
- dev_err(glue->dev, "can't add platform data\n");
- goto out_dev_put;
- }
- ret = platform_device_add(glue->core);
- if (ret) {
- dev_err(glue->dev, "can't add platform device\n");
- goto out_dev_put;
- }
- return 0;
- out_dev_put:
- platform_device_put(glue->core);
- out_free_glue:
- kfree(glue);
- out:
- return ret;
- }
- static void __devexit wl1271_remove(struct sdio_func *func)
- {
- struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
- /* Undo decrement done above in wl1271_probe */
- pm_runtime_get_noresume(&func->dev);
- platform_device_del(glue->core);
- platform_device_put(glue->core);
- kfree(glue);
- }
- #ifdef CONFIG_PM
- static int wl1271_suspend(struct device *dev)
- {
- /* Tell MMC/SDIO core it's OK to power down the card
- * (if it isn't already), but not to remove it completely */
- struct sdio_func *func = dev_to_sdio_func(dev);
- struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
- struct wl1271 *wl = platform_get_drvdata(glue->core);
- mmc_pm_flag_t sdio_flags;
- int ret = 0;
- dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n",
- wl->wow_enabled);
- /* check whether sdio should keep power */
- if (wl->wow_enabled) {
- sdio_flags = sdio_get_host_pm_caps(func);
- if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
- dev_err(dev, "can't keep power while host "
- "is suspended\n");
- ret = -EINVAL;
- goto out;
- }
- /* keep power while host suspended */
- ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
- if (ret) {
- dev_err(dev, "error while trying to keep power\n");
- goto out;
- }
- }
- out:
- return ret;
- }
- static int wl1271_resume(struct device *dev)
- {
- dev_dbg(dev, "wl1271 resume\n");
- return 0;
- }
- static const struct dev_pm_ops wl1271_sdio_pm_ops = {
- .suspend = wl1271_suspend,
- .resume = wl1271_resume,
- };
- #endif
- static struct sdio_driver wl1271_sdio_driver = {
- .name = "wl1271_sdio",
- .id_table = wl1271_devices,
- .probe = wl1271_probe,
- .remove = __devexit_p(wl1271_remove),
- #ifdef CONFIG_PM
- .drv = {
- .pm = &wl1271_sdio_pm_ops,
- },
- #endif
- };
- static int __init wl1271_init(void)
- {
- return sdio_register_driver(&wl1271_sdio_driver);
- }
- static void __exit wl1271_exit(void)
- {
- sdio_unregister_driver(&wl1271_sdio_driver);
- }
- module_init(wl1271_init);
- module_exit(wl1271_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
- MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
- MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE);
- MODULE_FIRMWARE(WL127X_FW_NAME_MULTI);
- MODULE_FIRMWARE(WL127X_PLT_FW_NAME);
- MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE);
- MODULE_FIRMWARE(WL128X_FW_NAME_MULTI);
- MODULE_FIRMWARE(WL128X_PLT_FW_NAME);
|