| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143 |
- #
- # PHY Layer Configuration
- #
- menuconfig PHYLIB
- tristate "PHY Device support and infrastructure"
- depends on !S390
- depends on NETDEVICES
- help
- Ethernet controllers are usually attached to PHY
- devices. This option provides infrastructure for
- managing PHY devices.
- if PHYLIB
- comment "MII PHY device drivers"
- config AMD_PHY
- tristate "Drivers for the AMD PHYs"
- ---help---
- Currently supports the am79c874
- config MARVELL_PHY
- tristate "Drivers for Marvell PHYs"
- ---help---
- Currently has a driver for the 88E1011S
-
- config DAVICOM_PHY
- tristate "Drivers for Davicom PHYs"
- ---help---
- Currently supports dm9161e and dm9131
- config QSEMI_PHY
- tristate "Drivers for Quality Semiconductor PHYs"
- ---help---
- Currently supports the qs6612
- config LXT_PHY
- tristate "Drivers for the Intel LXT PHYs"
- ---help---
- Currently supports the lxt970, lxt971
- config CICADA_PHY
- tristate "Drivers for the Cicada PHYs"
- ---help---
- Currently supports the cis8204
- config VITESSE_PHY
- tristate "Drivers for the Vitesse PHYs"
- ---help---
- Currently supports the vsc8244
- config SMSC_PHY
- tristate "Drivers for SMSC PHYs"
- ---help---
- Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
- config BROADCOM_PHY
- tristate "Drivers for Broadcom PHYs"
- ---help---
- Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
- and BCM5482 PHYs.
- config BCM63XX_PHY
- tristate "Drivers for Broadcom 63xx SOCs internal PHY"
- depends on BCM63XX
- ---help---
- Currently supports the 6348 and 6358 PHYs.
- config ICPLUS_PHY
- tristate "Drivers for ICPlus PHYs"
- ---help---
- Currently supports the IP175C and IP1001 PHYs.
- config REALTEK_PHY
- tristate "Drivers for Realtek PHYs"
- ---help---
- Supports the Realtek 821x PHY.
- config NATIONAL_PHY
- tristate "Drivers for National Semiconductor PHYs"
- ---help---
- Currently supports the DP83865 PHY.
- config STE10XP
- tristate "Driver for STMicroelectronics STe10Xp PHYs"
- ---help---
- This is the driver for the STe100p and STe101p PHYs.
- config LSI_ET1011C_PHY
- tristate "Driver for LSI ET1011C PHY"
- ---help---
- Supports the LSI ET1011C PHY.
- config MICREL_PHY
- tristate "Driver for Micrel PHYs"
- ---help---
- Supports the KSZ9021, VSC8201, KS8001 PHYs.
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
- ---help---
- Adds the platform "fixed" MDIO Bus to cover the boards that use
- PHYs that are not connected to the real MDIO bus.
- Currently tested with mpc866ads and mpc8349e-mitx.
- config MDIO_BITBANG
- tristate "Support for bitbanged MDIO buses"
- help
- This module implements the MDIO bus protocol in software,
- for use by low level drivers that export the ability to
- drive the relevant pins.
- If in doubt, say N.
- config MDIO_GPIO
- tristate "Support for GPIO lib-based bitbanged MDIO buses"
- depends on MDIO_BITBANG && GENERIC_GPIO
- ---help---
- Supports GPIO lib-based MDIO busses.
- To compile this driver as a module, choose M here: the module
- will be called mdio-gpio.
- config MDIO_OCTEON
- tristate "Support for MDIO buses on Octeon SOCs"
- depends on CPU_CAVIUM_OCTEON
- default y
- help
- This module provides a driver for the Octeon MDIO busses.
- It is required by the Octeon Ethernet device drivers.
- If in doubt, say Y.
- endif # PHYLIB
- config MICREL_KS8995MA
- tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
- depends on SPI
|
