| 12345678910111213141516171819202122232425262728293031323334 |
- * TI Highspeed MMC host controller for OMAP
- The Highspeed MMC Host Controller on TI OMAP family
- provides an interface for MMC, SD, and SDIO types of memory cards.
- Required properties:
- - compatible:
- Should be "ti,omap2-hsmmc", for OMAP2 controllers
- Should be "ti,omap3-hsmmc", for OMAP3 controllers
- Should be "ti,omap4-hsmmc", for OMAP4 controllers
- - ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
- - reg : should contain hsmmc registers location and length
- Optional properties:
- ti,dual-volt: boolean, supports dual voltage cards
- <supply-name>-supply: phandle to the regulator device tree node
- "supply-name" examples are "vmmc", "vmmc_aux" etc
- ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
- cd-gpios: GPIOs for card detection
- wp-gpios: GPIOs for write protection
- ti,non-removable: non-removable slot (like eMMC)
- ti,needs-special-reset: Requires a special softreset sequence
- Example:
- mmc1: mmc@0x4809c000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x4809c000 0x400>;
- ti,hwmods = "mmc1";
- ti,dual-volt;
- ti,bus-width = <4>;
- vmmc-supply = <&vmmc>; /* phandle to regulator node */
- ti,non-removable;
- };
|
