| 12345678910111213141516171819202122232425262728293031 |
- MMC/SD/SDIO slot directly connected to a SPI bus
- Required properties:
- - compatible : should be "mmc-spi-slot".
- - reg : should specify SPI address (chip-select number).
- - spi-max-frequency : maximum frequency for this device (Hz).
- - voltage-ranges : two cells are required, first cell specifies minimum
- slot voltage (mV), second cell specifies maximum slot voltage (mV).
- Several ranges could be specified.
- Optional properties:
- - gpios : may specify GPIOs in this order: Card-Detect GPIO,
- Write-Protect GPIO.
- - interrupts : the interrupt of a card detect interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- Example:
- mmc-slot@0 {
- compatible = "fsl,mpc8323rdb-mmc-slot",
- "mmc-spi-slot";
- reg = <0>;
- gpios = <&qe_pio_d 14 1
- &qe_pio_d 15 0>;
- voltage-ranges = <3300 3300>;
- spi-max-frequency = <50000000>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
|
