kernel_samsung_msm8974/Documentation/devicetree/bindings/batterydata/batterydata.txt

Battery Profile Data

Battery Data is a collection of battery profile data made available to
the QPNP Charger and BMS drivers via device tree.

qcom,battery-data node required properties:
- qcom,rpull-up-kohm : The vadc pullup resistor's resistance value in kOhms.
- qcom,vref-batt-therm-uv : The vadc voltage used to make readings.
			For Qualcomm VADCs this should be 1800000uV.

qcom,battery-data can also include any number of children nodes. These children
nodes will be treated as battery profile data nodes.

Profile data node required properties:
- qcom,fcc-mah : Full charge count of the battery in milliamp-hours
- qcom,default-rbatt-mohm : The nominal battery resistance value
- qcom,rbatt-capacitive-mohm : The capacitive resistance of the battery.
- qcom,flat-ocv-threshold-uv : The threshold under which the battery can be
			considered to be in the flat portion of the discharge
			curve.
- qcom,max-voltage-uv : The maximum rated voltage of the battery
- qcom,v-cutoff-uv : The cutoff voltage of the battery at which the device
			should shutdown gracefully.
- qcom,chg-term-ua : The termination charging current of the battery.
- qcom,batt-id-kohm : The battery id resistance of the battery. It can be
			used as an array which could support multiple IDs for one battery
			module when the ID resistance of some battery modules goes across
			several ranges.

Profile data node required subnodes:
- qcom,fcc-temp-lut : An 1-dimensional lookup table node that encodes
			temperature to fcc lookup. The units for this lookup
			table should be degrees celsius to milliamp-hours.
- qcom,pc-temp-ocv-lut : A 2-dimensional lookup table node that encodes
			temperature and percent charge to open circuit voltage
			lookup. The units for this lookup table should be
			degrees celsius and percent to millivolts.
- qcom,rbatt-sf-lut : A 2-dimentional lookup table node that encodes
			temperature and percent charge to battery internal
			resistance lookup. The units for this lookup table
			should be degrees celsius and percent to milliohms.

Lookup table required properties:
- qcom,lut-col-legend : An array that encodes the legend of the lookup table's
			columns. The length of this array will determine the
			lookup table's width.
- qcom,lut-data : An array that encodes the lookup table's data. The size of this
			array should be equal to the size of qcom,lut-col-legend
			multiplied by 1 if it's a 1-dimensional table, or
			the size of qcom,lut-row-legend if it's a 2-dimensional
			table. The data should be in a flattened row-major
			representation.

Lookup table optional properties:
- qcom,lut-row-legend : An array that encodes the legend of the lookup table's rows.
			If this property exists, then it is assumed that the
			lookup table is a 2-dimensional table.

Example:

In msm8974-mtp.dtsi:

mtp_batterydata: qcom,battery-data {
	qcom,rpull-up-kohm = <100>;
	qcom,vref-batt-therm-uv = <1800000>;

	/include/ "batterydata-palladium.dtsi"
	/include/ "batterydata-mtp-3000mah.dtsi"
};

&pm8941_bms {
	qcom,battery-data = <&mtp_batterydata>;
};

In batterydata-palladium.dtsi:

qcom,palladium-batterydata {
	qcom,fcc-mah = <1500>;
	qcom,default-rbatt-mohm = <236>;
	qcom,rbatt-capacitive-mohm = <50>;
	qcom,flat-ocv-threshold-uv = <3800000>;
	qcom,max-voltage-uv = <4200000>;
	qcom,v-cutoff-uv = <3400000>;
	qcom,chg-term-ua = <100000>;
	qcom,batt-id-kohm = <75>;

	qcom,fcc-temp-lut {
		qcom,lut-col-legend = <(-20) 0 25 40 65>;
		qcom,lut-data = <1492 1492 1493 1483 1502>;
	};

	qcom,pc-temp-ocv-lut {
		qcom,lut-col-legend = <(-20) 0 25 40 65>;
		qcom,lut-row-legend = <100 95 90 85 80 75 70>,
				<65 60 55 50 45 40 35>,
				<30 25 20 15 10 9 8>,
				<7 6 5 4 3 2 1 0>;
		qcom,lut-data = <4173 4167 4163 4156 4154>,
			<4104 4107 4108 4102 4104>,
			<4057 4072 4069 4061 4060>,
			<3973 4009 4019 4016 4020>,
			<3932 3959 3981 3982 3983>,
			<3899 3928 3954 3950 3950>,
			<3868 3895 3925 3921 3920>,
			<3837 3866 3898 3894 3892>,
			<3812 3841 3853 3856 3862>,
			<3794 3818 3825 3823 3822>,
			<3780 3799 3804 3804 3803>,
			<3768 3787 3790 3788 3788>,
			<3757 3779 3778 3775 3776>,
			<3747 3772 3771 3766 3765>,
			<3736 3763 3766 3760 3746>,
			<3725 3749 3756 3747 3729>,
			<3714 3718 3734 3724 3706>,
			<3701 3703 3696 3689 3668>,
			<3675 3695 3682 3675 3662>,
			<3670 3691 3680 3673 3661>,
			<3661 3686 3679 3672 3656>,
			<3649 3680 3676 3669 3641>,
			<3633 3669 3667 3655 3606>,
			<3610 3647 3640 3620 3560>,
			<3580 3607 3596 3572 3501>,
			<3533 3548 3537 3512 3425>,
			<3457 3468 3459 3429 3324>,
			<3328 3348 3340 3297 3172>,
			<3000 3000 3000 3000 3000>;
	};

	qcom,rbatt-sf-lut {
		qcom,lut-col-legend = <(-20) 0 25 40 65>;
		qcom,lut-row-legend = <100 95 90 85 80 75 70>,
				<65 60 55 50 45 40 35>,
				<30 25 20 15 10 9 8>,
				<7 6 5 4 3 2 1 0>;
		qcom,lut-data = <357 187 100 91 91>,
			<400 208 105 94 94>,
			<390 204 106 95 96>,
			<391 201 108 98 98>,
			<391 202 110 98 100>,
			<390 200 110 99 102>,
			<389 200 110 99 102>,
			<393 202 101 93 100>,
			<407 205 99 89 94>,
			<428 208 100 91 96>,
			<455 212 102 92 98>,
			<495 220 104 93 101>,
			<561 232 107 95 102>,
			<634 245 112 98 98>,
			<714 258 114 98 98>,
			<791 266 114 97 100>,
			<871 289 108 95 97>,
			<973 340 124 108 105>,
			<489 241 109 96 99>,
			<511 246 110 96 99>,
			<534 252 111 95 98>,
			<579 263 112 96 96>,
			<636 276 111 95 97>,
			<730 294 109 96 99>,
			<868 328 112 98 104>,
			<1089 374 119 101 115>,
			<1559 457 128 105 213>,
			<12886 1026 637 422 3269>,
			<170899 127211 98968 88907 77102>;
	};
};