123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204 |
- /*
- * linux/drivers/pcmcia/pxa2xx_trizeps4.c
- *
- * TRIZEPS PCMCIA specific routines.
- *
- * Author: Jürgen Schindele
- * Created: 20 02, 2006
- * Copyright: Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/gpio.h>
- #include <linux/interrupt.h>
- #include <linux/platform_device.h>
- #include <asm/mach-types.h>
- #include <asm/irq.h>
- #include <mach/pxa2xx-regs.h>
- #include <mach/trizeps4.h>
- #include "soc_common.h"
- extern void board_pcmcia_power(int power);
- static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
- {
- /* we dont have voltage/card/ready detection
- * so we dont need interrupts for it
- */
- switch (skt->nr) {
- case 0:
- skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
- skt->stat[SOC_STAT_CD].name = "cs0_cd";
- skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
- skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
- break;
- default:
- break;
- }
- /* release the reset of this card */
- pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
- return 0;
- }
- static unsigned long trizeps_pcmcia_status[2];
- static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
- struct pcmcia_state *state)
- {
- unsigned short status = 0, change;
- status = CFSR_readw();
- change = (status ^ trizeps_pcmcia_status[skt->nr]) &
- ConXS_CFSR_BVD_MASK;
- if (change) {
- trizeps_pcmcia_status[skt->nr] = status;
- if (status & ConXS_CFSR_BVD1) {
- /* enable_irq empty */
- } else {
- /* disable_irq empty */
- }
- }
- switch (skt->nr) {
- case 0:
- /* just fill in fix states */
- state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0;
- state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0;
- state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1;
- state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1;
- break;
- #ifndef CONFIG_MACH_TRIZEPS_CONXS
- /* on ConXS we only have one slot. Second is inactive */
- case 1:
- state->detect = 0;
- state->ready = 0;
- state->bvd1 = 0;
- state->bvd2 = 0;
- state->vs_3v = 0;
- state->vs_Xv = 0;
- break;
- #endif
- }
- }
- static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
- const socket_state_t *state)
- {
- int ret = 0;
- unsigned short power = 0;
- /* we do nothing here just check a bit */
- switch (state->Vcc) {
- case 0: power &= 0xfc; break;
- case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
- case 50:
- pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
- break;
- default:
- pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
- ret = -1;
- }
- switch (state->Vpp) {
- case 0: power &= 0xf3; break;
- case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
- case 120:
- pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
- break;
- default:
- if (state->Vpp != state->Vcc) {
- pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
- ret = -1;
- }
- }
- switch (skt->nr) {
- case 0: /* we only have 3.3V */
- board_pcmcia_power(power);
- break;
- #ifndef CONFIG_MACH_TRIZEPS_CONXS
- /* on ConXS we only have one slot. Second is inactive */
- case 1:
- #endif
- default:
- break;
- }
- return ret;
- }
- static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
- {
- /* default is on */
- board_pcmcia_power(0x9);
- }
- static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
- {
- board_pcmcia_power(0x0);
- }
- static struct pcmcia_low_level trizeps_pcmcia_ops = {
- .owner = THIS_MODULE,
- .hw_init = trizeps_pcmcia_hw_init,
- .socket_state = trizeps_pcmcia_socket_state,
- .configure_socket = trizeps_pcmcia_configure_socket,
- .socket_init = trizeps_pcmcia_socket_init,
- .socket_suspend = trizeps_pcmcia_socket_suspend,
- #ifdef CONFIG_MACH_TRIZEPS_CONXS
- .nr = 1,
- #else
- .nr = 2,
- #endif
- .first = 0,
- };
- static struct platform_device *trizeps_pcmcia_device;
- static int __init trizeps_pcmcia_init(void)
- {
- int ret;
- if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
- return -ENODEV;
- trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
- if (!trizeps_pcmcia_device)
- return -ENOMEM;
- ret = platform_device_add_data(trizeps_pcmcia_device,
- &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
- if (ret == 0)
- ret = platform_device_add(trizeps_pcmcia_device);
- if (ret)
- platform_device_put(trizeps_pcmcia_device);
- return ret;
- }
- static void __exit trizeps_pcmcia_exit(void)
- {
- platform_device_unregister(trizeps_pcmcia_device);
- }
- fs_initcall(trizeps_pcmcia_init);
- module_exit(trizeps_pcmcia_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Juergen Schindele");
- MODULE_ALIAS("platform:pxa2xx-pcmcia");
|