kernel_samsung_msm8974/drivers/sensors/Kconfig

#
# Sensor  drivers configuration
#
menuconfig SENSORS
	bool "Sensor devices"
	help
	  Say Y here, and a list of sensors drivers will be displayed.
	  Everything that didn't fit into the other categories is here. This option
	  doesn't affect the kernel.

	  If unsure, say Y.

config SENSORS_BMI055
	tristate "BMI055 Combo Sensor Driver"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Bosch-Sensortec's
	  BMI055 Acceleration & Gyroscope Sensor.

config SENSORS_BMI058
	tristate "BMI058 Combo Sensor Driver"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Bosch-Sensortec's
	  BMI058 Acceleration & Gyroscope Sensor.

config SENSORS_AK8963C
	tristate "AK8963C compass support"
	default n
	depends on I2C
	help
	  If you say yes here you get support for Asahi Kasei's
	  orientation sensor AK8963.

config SENSORS_AK09911C
	tristate "AK09911C compass support"
	default n
	depends on I2C
	help
	  If you say yes here you get support for Asahi Kasei's
	  orientation sensor AK09911C.

config SENSORS_CM3323
	depends on I2C
	tristate "CM3323 driver"
	default n
	help
	  Say Y here if you use cm3323.
	  This option enables RGB sensors using
	  Capella cm3323 device driver.

	  Say N here if you do not use cm3323.

config SENSORS_CM36653
	depends on I2C
	tristate "CM36653 driver"
	default n
	help
	  Say Y here if you use cm36653.
	  This option enables RGB sensors using
	  Capella cm36653 device driver.

	  Say N here if you do not use cm36653.

config SENSORS_CM36686
	depends on I2C
	tristate "CM36686 driver"
	default n
	help
	  This option enables proximity & light sensors using CM36686 driver.

config SENSORS_CM36686_LEDA_EN_GPIO
	depends on I2C
	tristate "CM36686 leda_en controlled by GPIO"
	default n
	help
	  This option enables leda_en controlled by GPIO using CM36686 driver.

config SENSORS_GP2A030A
	depends on I2C
	tristate "GP2A030A Light Driver"
	default n
	help
	  Say Y here if you use GP2A030A.
	  This option enables optial sensors using
	  Sharp GP2A030A device driver.

	  Say N here if you do not use GP2A030A.

config SENSORS_GP2A030A_PROX
	depends on SENSORS_GP2A030A
	tristate "GP2A030A Proximity Driver"
	default n
	help
	  Say Y here if you use GP2A030A.
	  This option enables optial sensors using
	  Sharp GP2A030A device driver.

	  Say N here if you do not use GP2A030A.

config SENSORS_ADPD142
	depends on I2C
	tristate "ADI hrm sensor driver"
	default n
	help
	  This option enables hrm sensors using adpd142 driver.


config SENSORS_TMD3782S
	depends on I2C
	tristate "SENSORS_TMD3782S"
	default n
	help
	  Say Y here if you use TAOS_TMD3782S.
	  This option enables optial sensors using
	  Sharp TAOS_TMD3782S device driver.

config SENSORS_K2HH
	depends on I2C
	tristate "SENSORS_K2HH"
	default n
	help
	  Say Y here if you use SENSORS_K2HH.
	  This option enables accelerometer sensors using
	  STMicroelectronic K2HH device driver.

config SENSORS_SX9500
	depends on I2C
	tristate "SX9500 driver"
	default n
	help
	  Say Y here if you use sx9500.
	  This option enables grip sensors using
	  SemTech sx9500 device driver.

	  Say N here if you do not use sx9500.

config SENSORS_GRIP_ADJDET
	depends on I2C
	tristate "GRIP sensor adj cable detect"
	default n
	help
	  GRIP sensor adj cable detect

config SENSORS_SX9500_REGULATOR_ONOFF
	tristate "GRIP sensor regulator onoff function"
	default n
	help
	  GRIP sensor regulator onoff

config SENSORS_SX9500_INIT_TOUCH_THRESHOLD
	int "SX9500 Grip sensor threshold for init touch"
	depends on SENSORS_SX9500
	default "3000"
	help
	  This value is the standard of init touch using
	  SemTech sx9500 device driver.

config SENSORS_SX9500_NORMAL_TOUCH_THRESHOLD
	int "SX9500 Grip sensor threshold for normal touch"
	depends on SENSORS_SX9500
	default "17"
	help
	  This value is the standard of normal touch using
	  SemTech sx9500 device driver.

config SENSORS_BMA254
	tristate "BMA254 acceleration sensor support"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Bosch Sensortec's
	  acceleration sensors BMA254.

config SENSORS_POWERCONTROL
	tristate "Sensors power control"
	default n
	help
	  Say Y here to control power supply for drivers.

config SENSORS_GP2A_VDDCONTROL
	tristate "Sensors GP2A VDD control"
	default n
	help
	  Say Y here to control power vdd supply for drivers.

config BMA254_SMART_ALERT
	depends on I2C
	tristate "bma254 smart alert"
	default n
	help
	  This option enables bma254 smart alert function.

config SENSORS_GP2A002
	tristate "GP2A002 proximity sensor support"
	depends on I2C
	default n
	help
	  If you say yes here you get support for sharp Sensortec's
	  proximity sensors GP2A002.

config SENSORS_POWER_EN
	tristate "Sensors power control"
	default n
	help
	  Say Y here to enable power supply for drivers.

config SENSORS_K3DH
	tristate "K3DH acceleration sensor support"
	depends on I2C
        default n
	help
	  Driver for STMicroelectronic K3DH accelerometer.

config SENSOR_K3DH_INPUTDEV
	bool "K3DH acceleration sensor input dev support"
	depends on SENSORS_K3DH
        default n
	help
	  Say Y here if you use K3DH.
	  This option enables accelerometer sensor using
	  K3DH device driver.

	  Say N here if you do not use K3DH.

config INPUT_MPU6500
	bool "Invensense MPU-6500 sensor"
	default n
	help
	  Say Y here if you want support for the MPU-6500 sensor
	  device.

	  To compile this driver as a module, choose M here: the
	  module will be called MPU6500.

config MPU6500_ADJUST_SMART_ALERT
	bool "MPU6500 sensor smart alert adjustment"
	default n
	help
	  Say Y here if you want to adjust smart alert for mpu6500 sensor

config INPUT_MPU6500_SELFTEST
	bool "Self-test of Invensense MPU-6500 sensor"
	default n
	help
	  Say Y here if you want support for self-test of the MPU-6500 sensor
	  device.

	  To compile this driver as a module, choose M here: the
	  module will be called MPU6500.

config INPUT_MPU6500_POLLING
	bool "Polling-mode of Invensense MPU-6500 sensor"
	default n
	help
	  Say Y here if you want support for polling-mode of the MPU-6500 sensor
	  device.

	  To compile this driver as a module, choose M here: the
	  module will be called MPU6500.

config SENSORS_TMD27723
	depends on I2C
	tristate "TMD27723 driver"
	default n
	help
	   This option enables proximity & light sensors using TMD27723 driver.

config INPUT_YAS_SENSORS
	bool "Sensors Support"
	default n
	help
	  Say Y to enable Sensors support.  This allows control of supported
	  Sensors.
config SENSORS_BMA255
	tristate "YAS Acceleration Sensor- BMA255"
	depends on I2C
	default n
	help
	  Say Y here if you want support for the BMA255 sensor
	  device.

	  To compile this driver as a module, choose M here: the
	  module will be called BMA255.
config SENSORS_CORE
         bool "sensors_core"
         depends on I2C
config SENSORS_HSCDTD008A
	depends on I2C
	tristate "hscd alps HSCDTD008A"
	default n
	help
	  This option enables hscd alps HSCDTD008A mag driver

config SENSORS_CM36651
	depends on I2C && GENERIC_GPIO
	tristate "Capella CM3663 ambient light and proximity sensor"
	default n
	help
	  This option enables proximity & light sensors using CM3663 driver.

config SENSORS_MAX86900
	tristate "MAXIM MAX86900 HRM Sensor"
	default n
	depends on I2C && SYSFS
	help
	  If you say yes here you get support for the MAX86900
	  HRM sensor.
	  This driver can also be built as a module.  If so, the module
	  will be called max86900.

config SENSORS_K303C
	depends on I2C
	tristate "ST K303C accel,magnetic combo"
	default n
	help
	  This option enables st k303c accel and mag driver

source "drivers/sensors/yas532/Kconfig"