123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899 |
- /* Copyright (c) 2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
- #include "msm_fb.h"
- #include "mipi_dsi.h"
- #include "mipi_NT35510.h"
- static struct msm_panel_info pinfo;
- static struct mipi_dsi_phy_ctrl dsi_cmd_mode_phy_db = {
- /* DSI Bit Clock at 500 MHz, 2 lane, RGB888 */
- /* regulator */
- {0x03, 0x01, 0x01, 0x00},
- /* timing */
- {0xb9, 0x8e, 0x1f, 0x00, 0x98, 0x9c, 0x22, 0x90,
- 0x18, 0x03, 0x04},
- /* phy ctrl */
- {0x7f, 0x00, 0x00, 0x00},
- /* strength */
- {0xbb, 0x02, 0x06, 0x00},
- /* pll control */
- {0x01, 0xec, 0x31, 0xd2, 0x00, 0x40, 0x37, 0x62,
- 0x01, 0x0f, 0x07,
- 0x05, 0x14, 0x03, 0x0, 0x0, 0x0, 0x20, 0x0, 0x02, 0x0},
- };
- static int mipi_cmd_nt35510_wvga_pt_init(void)
- {
- int ret;
- if (msm_fb_detect_client("mipi_cmd_nt35510_wvga"))
- return 0;
- pinfo.xres = 480;
- pinfo.yres = 800;
- pinfo.type = MIPI_CMD_PANEL;
- pinfo.pdest = DISPLAY_1;
- pinfo.wait_cycle = 0;
- pinfo.bpp = 24;
- pinfo.lcdc.h_back_porch = 100;
- pinfo.lcdc.h_front_porch = 100;
- pinfo.lcdc.h_pulse_width = 8;
- pinfo.lcdc.v_back_porch = 20;
- pinfo.lcdc.v_front_porch = 20;
- pinfo.lcdc.v_pulse_width = 1;
- pinfo.lcdc.border_clr = 0; /* blk */
- pinfo.lcdc.underflow_clr = 0xff; /* blue */
- pinfo.lcdc.hsync_skew = 0;
- pinfo.bl_max = 255;
- pinfo.bl_min = 1;
- pinfo.fb_num = 2;
- pinfo.clk_rate = 499000000;
- pinfo.lcd.vsync_enable = TRUE;
- pinfo.lcd.hw_vsync_mode = TRUE;
- pinfo.lcd.refx100 = 6000; /* adjust refx100 to prevent tearing */
- pinfo.mipi.mode = DSI_CMD_MODE;
- pinfo.mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888;
- pinfo.mipi.vc = 0;
- pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
- pinfo.mipi.data_lane0 = TRUE;
- pinfo.mipi.data_lane1 = TRUE;
- pinfo.mipi.t_clk_post = 0x20;
- pinfo.mipi.t_clk_pre = 0x2F;
- pinfo.mipi.stream = 0; /* dma_p */
- pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
- pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
- pinfo.mipi.te_sel = 1; /* TE from vsync gpio */
- pinfo.mipi.interleave_max = 1;
- pinfo.mipi.insert_dcs_cmd = TRUE;
- pinfo.mipi.wr_mem_continue = 0x3c;
- pinfo.mipi.wr_mem_start = 0x2c;
- pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
- pinfo.mipi.tx_eot_append = 0x01;
- pinfo.mipi.rx_eot_ignore = 0x0;
- pinfo.mipi.dlane_swap = 0x01;
- ret = mipi_nt35510_device_register(&pinfo, MIPI_DSI_PRIM,
- MIPI_DSI_PANEL_WVGA_PT);
- if (ret)
- pr_err("%s: failed to register device!\n", __func__);
- return ret;
- }
- module_init(mipi_cmd_nt35510_wvga_pt_init);
|