123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296 |
- /*
- * TI CDCE949 clock synthesizer driver
- *
- * Note: This implementation assumes an input of 27MHz to the CDCE.
- * This is by no means constrained by CDCE hardware although the datasheet
- * does use this as an example for all illustrations and more importantly:
- * that is the crystal input on boards it is currently used on.
- *
- * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
- #include <linux/kernel.h>
- #include <linux/clk.h>
- #include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/module.h>
- #include <mach/clock.h>
- #include <mach/cdce949.h>
- #include "clock.h"
- static struct i2c_client *cdce_i2c_client;
- static DEFINE_MUTEX(cdce_mutex);
- /* CDCE register descriptor */
- struct cdce_reg {
- u8 addr;
- u8 val;
- };
- /* Per-Output (Y1, Y2 etc.) frequency descriptor */
- struct cdce_freq {
- /* Frequency in KHz */
- unsigned long frequency;
- /*
- * List of registers to program to obtain a particular frequency.
- * 0x0 in register address and value is the end of list marker.
- */
- struct cdce_reg *reglist;
- };
- #define CDCE_FREQ_TABLE_ENTRY(line, out) \
- { \
- .reglist = cdce_y ##line## _ ##out, \
- .frequency = out, \
- }
- /* List of CDCE outputs */
- struct cdce_output {
- /* List of frequencies on this output */
- struct cdce_freq *freq_table;
- /* Number of possible frequencies */
- int size;
- };
- /*
- * Finding out the values to program into CDCE949 registers for a particular
- * frequency output is not a simple calculation. Have a look at the datasheet
- * for the details. There is desktop software available to help users with
- * the calculations. Here, we just depend on the output of that software
- * (or hand calculations) instead trying to runtime calculate the register
- * values and inflicting misery on ourselves.
- */
- static struct cdce_reg cdce_y1_148500[] = {
- { 0x13, 0x00 },
- /* program PLL1_0 multiplier */
- { 0x18, 0xaf },
- { 0x19, 0x50 },
- { 0x1a, 0x02 },
- { 0x1b, 0xc9 },
- /* program PLL1_11 multiplier */
- { 0x1c, 0x00 },
- { 0x1d, 0x40 },
- { 0x1e, 0x02 },
- { 0x1f, 0xc9 },
- /* output state selection */
- { 0x15, 0x00 },
- { 0x14, 0xef },
- /* switch MUX to PLL1 output */
- { 0x14, 0x6f },
- { 0x16, 0x06 },
- /* set P2DIV divider, P3DIV and input crystal */
- { 0x17, 0x06 },
- { 0x01, 0x00 },
- { 0x05, 0x48 },
- { 0x02, 0x80 },
- /* enable and disable PLL */
- { 0x02, 0xbc },
- { 0x03, 0x01 },
- { },
- };
- static struct cdce_reg cdce_y1_74250[] = {
- { 0x13, 0x00 },
- { 0x18, 0xaf },
- { 0x19, 0x50 },
- { 0x1a, 0x02 },
- { 0x1b, 0xc9 },
- { 0x1c, 0x00 },
- { 0x1d, 0x40 },
- { 0x1e, 0x02 },
- { 0x1f, 0xc9 },
- /* output state selection */
- { 0x15, 0x00 },
- { 0x14, 0xef },
- /* switch MUX to PLL1 output */
- { 0x14, 0x6f },
- { 0x16, 0x06 },
- /* set P2DIV divider, P3DIV and input crystal */
- { 0x17, 0x06 },
- { 0x01, 0x00 },
- { 0x05, 0x48 },
- { 0x02, 0x80 },
- /* enable and disable PLL */
- { 0x02, 0xbc },
- { 0x03, 0x02 },
- { },
- };
- static struct cdce_reg cdce_y1_27000[] = {
- { 0x13, 0x00 },
- { 0x18, 0x00 },
- { 0x19, 0x40 },
- { 0x1a, 0x02 },
- { 0x1b, 0x08 },
- { 0x1c, 0x00 },
- { 0x1d, 0x40 },
- { 0x1e, 0x02 },
- { 0x1f, 0x08 },
- { 0x15, 0x02 },
- { 0x14, 0xed },
- { 0x16, 0x01 },
- { 0x17, 0x01 },
- { 0x01, 0x00 },
- { 0x05, 0x50 },
- { 0x02, 0xb4 },
- { 0x03, 0x01 },
- { },
- };
- static struct cdce_freq cdce_y1_freqs[] = {
- CDCE_FREQ_TABLE_ENTRY(1, 148500),
- CDCE_FREQ_TABLE_ENTRY(1, 74250),
- CDCE_FREQ_TABLE_ENTRY(1, 27000),
- };
- static struct cdce_reg cdce_y5_13500[] = {
- { 0x27, 0x08 },
- { 0x28, 0x00 },
- { 0x29, 0x40 },
- { 0x2a, 0x02 },
- { 0x2b, 0x08 },
- { 0x24, 0x6f },
- { },
- };
- static struct cdce_reg cdce_y5_16875[] = {
- { 0x27, 0x08 },
- { 0x28, 0x9f },
- { 0x29, 0xb0 },
- { 0x2a, 0x02 },
- { 0x2b, 0x89 },
- { 0x24, 0x6f },
- { },
- };
- static struct cdce_reg cdce_y5_27000[] = {
- { 0x27, 0x04 },
- { 0x28, 0x00 },
- { 0x29, 0x40 },
- { 0x2a, 0x02 },
- { 0x2b, 0x08 },
- { 0x24, 0x6f },
- { },
- };
- static struct cdce_reg cdce_y5_54000[] = {
- { 0x27, 0x04 },
- { 0x28, 0xff },
- { 0x29, 0x80 },
- { 0x2a, 0x02 },
- { 0x2b, 0x07 },
- { 0x24, 0x6f },
- { },
- };
- static struct cdce_reg cdce_y5_81000[] = {
- { 0x27, 0x02 },
- { 0x28, 0xbf },
- { 0x29, 0xa0 },
- { 0x2a, 0x03 },
- { 0x2b, 0x0a },
- { 0x24, 0x6f },
- { },
- };
- static struct cdce_freq cdce_y5_freqs[] = {
- CDCE_FREQ_TABLE_ENTRY(5, 13500),
- CDCE_FREQ_TABLE_ENTRY(5, 16875),
- CDCE_FREQ_TABLE_ENTRY(5, 27000),
- CDCE_FREQ_TABLE_ENTRY(5, 54000),
- CDCE_FREQ_TABLE_ENTRY(5, 81000),
- };
- static struct cdce_output output_list[] = {
- [1] = { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) },
- [5] = { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) },
- };
- int cdce_set_rate(struct clk *clk, unsigned long rate)
- {
- int i, ret = 0;
- struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table;
- struct cdce_reg *regs = NULL;
- if (!cdce_i2c_client)
- return -ENODEV;
- if (!freq_table)
- return -EINVAL;
- for (i = 0; i < output_list[clk->lpsc].size; i++) {
- if (freq_table[i].frequency == rate / 1000) {
- regs = freq_table[i].reglist;
- break;
- }
- }
- if (!regs)
- return -EINVAL;
- mutex_lock(&cdce_mutex);
- for (i = 0; regs[i].addr; i++) {
- ret = i2c_smbus_write_byte_data(cdce_i2c_client,
- regs[i].addr | 0x80, regs[i].val);
- if (ret)
- break;
- }
- mutex_unlock(&cdce_mutex);
- if (!ret)
- clk->rate = rate;
- return ret;
- }
- static int cdce_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- cdce_i2c_client = client;
- return 0;
- }
- static int __devexit cdce_remove(struct i2c_client *client)
- {
- cdce_i2c_client = NULL;
- return 0;
- }
- static const struct i2c_device_id cdce_id[] = {
- {"cdce949", 0},
- {},
- };
- MODULE_DEVICE_TABLE(i2c, cdce_id);
- static struct i2c_driver cdce_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "cdce949",
- },
- .probe = cdce_probe,
- .remove = __devexit_p(cdce_remove),
- .id_table = cdce_id,
- };
- static int __init cdce_init(void)
- {
- return i2c_add_driver(&cdce_driver);
- }
- subsys_initcall(cdce_init);
- static void __exit cdce_exit(void)
- {
- i2c_del_driver(&cdce_driver);
- }
- module_exit(cdce_exit);
- MODULE_AUTHOR("Texas Instruments");
- MODULE_DESCRIPTION("CDCE949 clock synthesizer driver");
- MODULE_LICENSE("GPL v2");
|