123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253 |
- /*
- * Intel PXA25x on-chip full speed USB device controller
- *
- * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2003 David Brownell
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
- #ifndef __LINUX_USB_GADGET_PXA25X_H
- #define __LINUX_USB_GADGET_PXA25X_H
- #include <linux/types.h>
- /*-------------------------------------------------------------------------*/
- /* pxa25x has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
- #define UFNRH_SIR (1 << 7) /* SOF interrupt request */
- #define UFNRH_SIM (1 << 6) /* SOF interrupt mask */
- #define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */
- #define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */
- #define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */
- /* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
- #define UDCCFR UDC_RES2 /* UDC Control Function Register */
- #define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */
- #define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */
- /* latest pxa255 errata define new "must be one" bits in UDCCFR */
- #define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM))
- /*-------------------------------------------------------------------------*/
- struct pxa25x_udc;
- struct pxa25x_ep {
- struct usb_ep ep;
- struct pxa25x_udc *dev;
- const struct usb_endpoint_descriptor *desc;
- struct list_head queue;
- unsigned long pio_irqs;
- unsigned short fifo_size;
- u8 bEndpointAddress;
- u8 bmAttributes;
- unsigned stopped : 1;
- unsigned dma_fixup : 1;
- /* UDCCS = UDC Control/Status for this EP
- * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
- * UDDR = UDC Endpoint Data Register (the fifo)
- * DRCM = DMA Request Channel Map
- */
- volatile u32 *reg_udccs;
- volatile u32 *reg_ubcr;
- volatile u32 *reg_uddr;
- };
- struct pxa25x_request {
- struct usb_request req;
- struct list_head queue;
- };
- enum ep0_state {
- EP0_IDLE,
- EP0_IN_DATA_PHASE,
- EP0_OUT_DATA_PHASE,
- EP0_END_XFER,
- EP0_STALL,
- };
- #define EP0_FIFO_SIZE ((unsigned)16)
- #define BULK_FIFO_SIZE ((unsigned)64)
- #define ISO_FIFO_SIZE ((unsigned)256)
- #define INT_FIFO_SIZE ((unsigned)8)
- struct udc_stats {
- struct ep0stats {
- unsigned long ops;
- unsigned long bytes;
- } read, write;
- unsigned long irqs;
- };
- #ifdef CONFIG_USB_PXA25X_SMALL
- /* when memory's tight, SMALL config saves code+data. */
- #define PXA_UDC_NUM_ENDPOINTS 3
- #endif
- #ifndef PXA_UDC_NUM_ENDPOINTS
- #define PXA_UDC_NUM_ENDPOINTS 16
- #endif
- struct pxa25x_udc {
- struct usb_gadget gadget;
- struct usb_gadget_driver *driver;
- enum ep0_state ep0state;
- struct udc_stats stats;
- unsigned got_irq : 1,
- vbus : 1,
- pullup : 1,
- has_cfr : 1,
- req_pending : 1,
- req_std : 1,
- req_config : 1,
- suspended : 1,
- active : 1;
- #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
- struct timer_list timer;
- struct device *dev;
- struct clk *clk;
- struct pxa2xx_udc_mach_info *mach;
- struct usb_phy *transceiver;
- u64 dma_mask;
- struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS];
- #ifdef CONFIG_USB_GADGET_DEBUG_FS
- struct dentry *debugfs_udc;
- #endif
- };
- /*-------------------------------------------------------------------------*/
- #ifdef CONFIG_ARCH_LUBBOCK
- #include <mach/lubbock.h>
- /* lubbock can also report usb connect/disconnect irqs */
- #endif
- static struct pxa25x_udc *the_controller;
- /*-------------------------------------------------------------------------*/
- /*
- * Debugging support vanishes in non-debug builds. DBG_NORMAL should be
- * mostly silent during normal use/testing, with no timing side-effects.
- */
- #define DBG_NORMAL 1 /* error paths, device state transitions */
- #define DBG_VERBOSE 2 /* add some success path trace info */
- #define DBG_NOISY 3 /* ... even more: request level */
- #define DBG_VERY_NOISY 4 /* ... even more: packet level */
- #define DMSG(stuff...) pr_debug("udc: " stuff)
- #ifdef DEBUG
- static const char *state_name[] = {
- "EP0_IDLE",
- "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
- "EP0_END_XFER", "EP0_STALL"
- };
- #ifdef VERBOSE_DEBUG
- # define UDC_DEBUG DBG_VERBOSE
- #else
- # define UDC_DEBUG DBG_NORMAL
- #endif
- static void __maybe_unused
- dump_udccr(const char *label)
- {
- u32 udccr = UDCCR;
- DMSG("%s %02X =%s%s%s%s%s%s%s%s\n",
- label, udccr,
- (udccr & UDCCR_REM) ? " rem" : "",
- (udccr & UDCCR_RSTIR) ? " rstir" : "",
- (udccr & UDCCR_SRM) ? " srm" : "",
- (udccr & UDCCR_SUSIR) ? " susir" : "",
- (udccr & UDCCR_RESIR) ? " resir" : "",
- (udccr & UDCCR_RSM) ? " rsm" : "",
- (udccr & UDCCR_UDA) ? " uda" : "",
- (udccr & UDCCR_UDE) ? " ude" : "");
- }
- static void __maybe_unused
- dump_udccs0(const char *label)
- {
- u32 udccs0 = UDCCS0;
- DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n",
- label, state_name[the_controller->ep0state], udccs0,
- (udccs0 & UDCCS0_SA) ? " sa" : "",
- (udccs0 & UDCCS0_RNE) ? " rne" : "",
- (udccs0 & UDCCS0_FST) ? " fst" : "",
- (udccs0 & UDCCS0_SST) ? " sst" : "",
- (udccs0 & UDCCS0_DRWF) ? " dwrf" : "",
- (udccs0 & UDCCS0_FTF) ? " ftf" : "",
- (udccs0 & UDCCS0_IPR) ? " ipr" : "",
- (udccs0 & UDCCS0_OPR) ? " opr" : "");
- }
- static void __maybe_unused
- dump_state(struct pxa25x_udc *dev)
- {
- u32 tmp;
- unsigned i;
- DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
- state_name[dev->ep0state],
- UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
- dump_udccr("udccr");
- if (dev->has_cfr) {
- tmp = UDCCFR;
- DMSG("udccfr %02X =%s%s\n", tmp,
- (tmp & UDCCFR_AREN) ? " aren" : "",
- (tmp & UDCCFR_ACM) ? " acm" : "");
- }
- if (!dev->driver) {
- DMSG("no gadget driver bound\n");
- return;
- } else
- DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
- dump_udccs0 ("udccs0");
- DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
- dev->stats.write.bytes, dev->stats.write.ops,
- dev->stats.read.bytes, dev->stats.read.ops);
- for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- if (dev->ep [i].desc == NULL)
- continue;
- DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
- }
- }
- #else
- #define dump_udccr(x) do{}while(0)
- #define dump_udccs0(x) do{}while(0)
- #define dump_state(x) do{}while(0)
- #define UDC_DEBUG ((unsigned)0)
- #endif
- #define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
- #define ERR(stuff...) pr_err("udc: " stuff)
- #define WARNING(stuff...) pr_warning("udc: " stuff)
- #define INFO(stuff...) pr_info("udc: " stuff)
- #endif /* __LINUX_USB_GADGET_PXA25X_H */
|